BoardConfig.mk

#
# Copyright (C) 2016 The CyanogenMod Project
# Copyright (C) 2017 The LineageOS Project
# Copyright (C) 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

LOCAL_PATH := device/leeco/s2

# Headers
TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

# Platform
TARGET_BOARD_PLATFORM := msm8952
TARGET_BOARD_PLATFORM_GPU := qcom-adreno510

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53

TARGET_USES_64_BIT_BINDER := true
TARGET_NEEDS_TEXT_RELOCATIONS := true

# Bootloader
TARGET_NO_BOOTLOADER := true
TARGET_BOOTLOADER_BOARD_NAME := MSM8952

# Kernel
BOARD_KERNEL_CMDLINE := console=tty0,ttyHSL0,115200,n8 androidboot.console=tty0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 ramoops_memreserve=4M earlyprintk androidboot.selinux=permissive
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_PAGESIZE := 2048
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb

BOARD_RAMDISK_OFFSET := 0x02000000

TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_APPEND_DTB := true

TARGET_KERNEL_SOURCE := kernel/leeco/msm8976
TARGET_KERNEL_CONFIG := lineage_s2_defconfig
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-

TARGET_COMPILE_WITH_MSM_KERNEL := true

BOARD_DTBTOOL_ARGS := -2

ENABLE_CPUSETS := true

# Partitions
BOARD_FLASH_BLOCK_SIZE := 131072
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 4294967296
BOARD_USERDATAIMAGE_PARTITION_SIZE := 57033579520
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432

TARGET_USERIMAGES_USE_EXT4 := true

# Init
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
TARGET_INIT_VENDOR_LIB := libinit_s2
TARGET_RECOVERY_DEVICE_MODULES := libinit_s2

# Qualcomm support
BOARD_USES_QCOM_HARDWARE := true
BOARD_USES_QC_TIME_SERVICES := true
TARGET_POWERHAL_VARIANT := qcom
CM_POWERHAL_EXTENSION := qcom
TARGET_POWERHAL_SET_INTERACTIVE_EXT := device/leeco/s2/power/power_ext.c

# RIL
#BOARD_PROVIDES_LIBRIL := false
#TARGET_RIL_VARIANT := caf

# Adreno
HAVE_ADRENO_SOURCE:= false
OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so

# Audio
BOARD_USES_ALSA_AUDIO := true
#USE_CUSTOM_AUDIO_POLICY := 1
BOARD_SUPPORTS_SOUND_TRIGGER := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_NEW_SAMPLE_RATE := true
#AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := true

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BLUETOOTH_HCI_USE_MCT := true
QCOM_BT_USE_BTNV := true
QCOM_BT_USE_SMD_TTY := true

# Properties
TARGET_SYSTEM_PROP += device/leeco/s2/system.prop

# Camera
USE_DEVICE_SPECIFIC_CAMERA := false
BOARD_QTI_CAMERA_32BIT_ONLY := true

# This is needed for us as it disables tcache, which is breaking camera.
MALLOC_SVELTE := true
BOARD_GLOBAL_CFLAGS += -DDECAY_TIME_DEFAULT=0

# Charger
#WITH_CM_CHARGER := true
BOARD_CHARGER_DISABLE_INIT_BLANK := true
BOARD_CHARGER_ENABLE_SUSPEND := true
BACKLIGHT_PATH := "/sys/class/leds/lcd-backlight/brightness"
BLINK_PATH := "/sys/class/leds/red/blink"

# CNE
BOARD_USES_QCNE := true
TARGET_LDPRELOAD := libNimsWrap.so

# Crypto
TARGET_HW_DISK_ENCRYPTION := false

# CSVT
TARGET_USES_CSVT := true

# Display
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
TARGET_USES_C2D_COMPOSITION := true
TARGET_USES_ION := true
TARGET_CONTINUOUS_SPLASH_ENABLED := true
#TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
USE_OPENGL_RENDERER := true

MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024

# GPS
USE_DEVICE_SPECIFIC_GPS := false
USE_DEVICE_SPECIFIC_LOC_API := false
TARGET_NO_RPC := true

# Keymaster
TARGET_PROVIDES_KEYMASTER := true
TARGET_KEYMASTER_WAIT_FOR_QSEE := true

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# Media
TARGET_USES_MEDIA_EXTENSIONS := true

# Peripheral manager
TARGET_PER_MGR_ENABLED := true

# Sensors
#USE_SENSOR_MULTI_HAL := true

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_WLAN_DEVICE := qcwcn
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_STA := "sta"
WPA_SUPPLICANT_VERSION := VER_0_8_X
TARGET_USES_WCNSS_MAC_ADDR_REV := true

# Cyanogen hardware
#BOARD_HARDWARE_CLASS += device/leeco/s2/cmhw

# Dex-preoptimization
WITH_DEXPREOPT := false

# Twrp
#RECOVERY_VARIANT := twrp
ifeq ($(RECOVERY_VARIANT),twrp)
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/twrp/fstab.qcom
BOARD_HAS_NO_REAL_SDCARD := true
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun0/file
TW_THEME := portrait_hdpi
RECOVERY_SDCARD_ON_DATA := true
TARGET_RECOVERY_QCOM_RTC_FIX := true
TW_BRIGHTNESS_PATH := /sys/class/leds/lcd-backlight/brightness
TW_DEFAULT_BRIGHTNESS := "160"
TW_INPUT_BLACKLIST := "hbtp_vm"
TW_EXTRA_LANGUAGES := true
TW_INCLUDE_CRYPTO := true
TW_INCLUDE_NTFS_3G := true
#TWRP_EVENT_LOGGING := true
else
#USE_CLANG_PLATFORM_BUILD := true
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/rootdir/fstab.qcom
endif

# Recovery
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Sepolicy
#BOARD_SEPOLICY_DIRS += $(LOCAL_PATH)/sepolicy
#include device/qcom/sepolicy/sepolicy.mk

# OTA Assert
TARGET_OTA_ASSERT_DEVICE := s2,le_s2,le_s2_ww

# inherit from the proprietary version
-include vendor/leeco/s2/BoardConfigVendor.mk