Skip to content

Latest commit

 

History

History
204 lines (138 loc) · 10.4 KB

README.md

File metadata and controls

204 lines (138 loc) · 10.4 KB
Raw

Build instructions

Compiled on / General Requirements:

  • 64bit system, it won't work on 32bit.
  • git 2.21.0.windows.1 (version not important unless the interface changes)
  • cmake 3.12.2
  • MITK v2018.04.2, more instructions on this below
  • Qt 5.11.1: Download and install using open-source license. This version is slightly old even now, so look for it in the archive when installing. We need the following components: "Desktop gcc (or msvc2017) 64-bit", "Qt WebEngine", and "Qt Script". On Windows install in short path, like C:\Qt. On linux you can install it wherever you want, but /home/YOUR_USERNAME/Work/Qt is a good place to be reduce clutter in accordance to what happens below.

Windows build instructions

Note: Use short paths for everything. This is a limitation of Windows. To be sure, it's better to use the exact paths listed below.

Windows-specific requirements

  • Visual Studio 2017 (Community - aka free - edition is fine). This needs the 2017 c++ toolset. I wasn't able to make it work with the VS2019 generator. I think it is not supported by MITK. After/During install make sure the "Desktop development with C++" workload is installed. The default enabled checkboxes should be fine but make sure that "VC++ 2017 ... tools" and "Visual C++ tools for CMake" are installed.
  • NSIS 2.51. Make sure it's available in path, you can do this by installing nsis-2.51-setup.exe. Don't use version 3+.

Clone MITK and the Workshop repository

cd C:\
git clone https://github.com/MITK/MITK
git clone https://github.com/CBICA/MITK-Workshop-Project

Checkout the v2018.04.2 tag of MITK

cd C:\MITK
git fetch --all --tags
git checkout v2018.04.2 -b v2018.04.2-branch

Configure and generate the superbuild

Important note: Even though we are on Windows, use '/' as a path separator and not '\' in cmake!

  • Open cmake-gui.
  • Put C:/MITK at "Where is the source code" (notice the forward slashes in the path)
  • Put C:/MITK-sb at "Where to build the binaries" (say yes if it asks to create the folder) (notice the forward slashes in the path)
  • Click configure.
  • If it comes up with an "error" that it can't find Qt, find the Qt5_DIR variable and set it to "C:/Qt/5.11.1/msvc2017_64/lib/cmake/Qt5" (notice the forward slashes)
  • Click configure
  • Set "CMAKE_INSTALL_PREFIX" to "C:/MITK-sb/install"
  • Set "MITK_USE_OpenCV" to true (check the box).
  • Set "MITK_EXTENSION_DIRS" to "C:/MITK-Workshop-Project" (notice the forward slashes)
  • Configure (and then configure again until there are no more red variables)
  • Click Generate
  • Click "Open Project" - that should open Visual Studio

Build the superbuild

  • In Visual Studio there will be a combobox that says "Solution Configurations" when you hover over it and will probably say "Debug" by default. Set it to "Release". * SEE COMMENT ON THIS BELOW
  • In the "Solution Explorer" on the right, right-click "ALL_BUILD" and click "Build".

This will take 1+ hour(s) depending on the system.

* Release means that the program will run fast, just the way we distribute it. You can choose to build the superbuild+build in "Debug" too. That way you can use a debugger to figure out issues in the code, but note that it will - for obvious reasons - run slower.

Configure and generate the build

Note: To distinguish between the two, the superbuild resides in "C:/MITK-sb" and the build in "C:/MITK-sb/MITK-build". It is obvious that the superbuild kind of contains the build even now without doing anything else. MITK Workbench - the GUI - will run even without doing anything in the build. But we need to enable two more plugins that work with our own.

Note: Close the "old" project in Visual Studio to not make things confusing.

  • Open CMake again
  • Put the "build" path in "Where to build the binaries". The path is "C:/MITK-sb/MITK-build".
  • Locate "MITK_BUILD_org.mitk.gui.qt.segmentation" and set it to true
  • Locate "MITK_BUILD_org.mitk.gui.qt.multilabelsegmentation" and set it to true
  • They would be enabled, but for reference: our plugin is enabled/disabled by "MITK_BUILD_upenn.cbica.captk.example1" and MITK Workbench - the GUI - by "MITK_BUILD_APP_Workbench".
  • Configure
  • Generate
  • Open Project

Build the... build

In Visual Studio, on your new "build" project and NOT the superbuild one:

  • There will be a combobox that says "Solution Configurations" when you hover over it and will probably say "Debug" by default. Set it to "Release". * SEE COMMENT ON THIS BELOW
  • In the "Solution Explorer" on the right, right-click "MitkWorkbench" and click "Build".

This will take 1+ hour(s) depending on the system.

* Release means that the program will run fast, just the way we distribute it. You can choose to build the superbuild+build in "Debug" too. That way you can use a debugger to figure out issues in the code, but note that it will - for obvious reasons - run slower.

Run

You can run the program by running the bat files in C:\MITK-sb\MITK-build\bin.

  • startMitkWorkbench_release.bat starts the program.
  • startMitkWorkbench_debug.bat starts the program in debug mode, if that was build.

Package

Packaging means making a zip file of the program + an installer. To do all this in the "build" project in visual studio, and only when in "Release" mode, find the "PACKAGE" project in "Solution Explorer". Right-click it and click build. That will create:

  • C:\MITK-sb\MITK-build\_CPack_Packages\win64\ZIP\MITK-v2018.04.2-windows-x86_64.zip the zip package

This allows the program to run without installing. Just unzip and run bin\MitkWorkbench.exe. For some very old systems, running thirdpartyinstallers\vc_redist.x64.exe might be needed first.

  • C:\MITK-sb\MITK-build\_CPack_Packages\win64\NSIS\MITK-v2018.04.2-windows-x86_64.exe the installer

This allows the program to be installed like a regular windows program. After that it will be available as MITK Workbench.

Linux (Ubuntu) build instructions

Linux (Ubuntu)-specific requirements

Note: This list was compiled in Ubuntu 18.04 and it might be slightly different if you are from the future.

  • Run: sudo apt install -y build-essential mesa-common-dev libglu1-mesa-dev libtiff5-dev libwrap0-dev libxt-dev libxi-dev g++ git gitk git-gui

Clone MITK and the Workshop repository

You are free to choose whichever paths you want, but for the instruction purposes everything will happen in $HOME/Work ($HOME aka ~ is your home directory, i.e. /home/YOUR_USERNAME)

mkdir -p ~/Work
cd ~/Work
git clone https://github.com/MITK/MITK
git clone https://github.com/CBICA/MITK-Workshop-Project

Checkout the v2018.04.2 tag of MITK

cd ~/Work/MITK
git fetch --all --tags
git checkout v2018.04.2 -b v2018.04.2-branch

Configure and generate the superbuild

These instructions are for a "Release" superbuild. Replace all instances of "Release" with "Debug" for a "Debug" superbuild. Release means that the program will run fast, just the way we distribute it. You can choose to build the superbuild+build in "Debug" too. That way you can use a debugger to figure out issues in the code, but note that it will - for obvious reasons - run slower.

  • Open cmake-gui.
  • Put /home/YOUR_USERNAME/Work/MITK at "Where is the source code"
  • Put /home/YOUR_USERNAME/Work/MITK-sb/Release at "Where to build the binaries" (say yes if it asks to create the directory)
  • Click configure.
  • If it comes up with an "error" that it can't find Qt: If you installed Qt in /home/YOUR_USERNAME/Work/Qt then find the Qt5_DIR variable and set it to /home/YOUR_USERNAME/Work/Qt/5.11.1/gcc_64/lib/cmake/Qt5 (obviously replace the first part if you installed somewhere else)
  • Click configure
  • Set "CMAKE_INSTALL_PREFIX" to "/home/YOUR_USERNAME/Work/MITK-sb/Release/install"
  • Set "MITK_USE_OpenCV" to true (check the box).
  • Set "MITK_EXTENSION_DIRS" to "/home/YOUR_USERNAME/Work/MITK-Workshop-Project"
  • Set CMAKE_BUILD_TYPE to "Release"
  • Set CMAKE_EXPORT_COMPILE_COMMANDS to true
  • Configure (and then configure again until there are no more red variables)
  • Click Generate

Build the superbuild

cd ~/Work/MITK-sb/Release
make -j4

(If you do a debug build, navigate to ~/Work/MITK-sb/Debug)

Note: You can replace make -j4 with make -j8 if your system is decent and it has 16+GB of RAM. If you get a compiler error related to RAM, just run make instead.

This will take 1+ hour(s) depending on the system.

Configure and generate the build

Note: To distinguish between the two, the superbuild resides in "/home/YOUR_USERNAME/Work/MITK-sb/Release" and the build in "/home/YOUR_USERNAME/Work/MITK-sb/Release/MITK-build". It is obvious that the superbuild kind of contains the build even now without doing anything else. MITK Workbench - the GUI - will run even without doing anything in the build. But we need to enable two more plugins that work with our own.

Note: Change all instances of "Release" to "Debug" for a "Debug" build.

  • Open CMake again
  • Put the "build" path in "Where to build the binaries". The path is "/home/YOUR_USERNAME/Work/MITK-sb/Release/MITK-build".
  • Locate "MITK_BUILD_org.mitk.gui.qt.segmentation" and set it to true
  • Locate "MITK_BUILD_org.mitk.gui.qt.multilabelsegmentation" and set it to true
  • They would be enabled, but for reference: our plugin is enabled/disabled by "MITK_BUILD_upenn.cbica.captk.example1" and MITK Workbench - the GUI - by "MITK_BUILD_APP_Workbench".
  • Set CMAKE_EXPORT_COMPILE_COMMANDS to true (this can help visual studio code and other IDEs pick up the headers.
  • Configure
  • Generate

Build the... build

cd ~/Work/MITK-sb/Release/MITK-build
make -j4

(If you do a debug build, navigate to ~/Work/MITK-sb/Debug/MITK-build)

Note: You can replace make -j4 with make -j8 if your system is decent and it has 16+GB of RAM. If you get a compiler error related to RAM, just run make instead.

Run

You can run the program by running ~/Work/MITK-sb/Release/MITK-build/bin/MitkWorkbench.

(If you build debug, run ~/Work/MITK-sb/Debug/MITK-build/bin/MitkWorkbench with your debugger)

Package

Release only!

cd ~/Work/MITK-sb/Release/MITK-build
make package