zh/guide/drivers/pikpak #13
giscus[bot]
bot
Replies: 67 comments 51 replies
-
|
请问invalid_request 怎么解决 |
Beta Was this translation helpful? Give feedback.
-
|
解决了吗，哥们 |
Beta Was this translation helpful? Give feedback.
-
|
同一样问题 |
Beta Was this translation helpful? Give feedback.
-
|
pikpak提供的这个网站无法使用了，还可以怎么获取根文件夹ID，谢谢 |
Beta Was this translation helpful? Give feedback.
-
|
随便挑一个就行 |
Beta Was this translation helpful? Give feedback.
-
|
其实最新版alist如果没有特别需求，添加网盘的时候，跟文件夹id保持默认就好。 |
Beta Was this translation helpful? Give feedback.
-
|
默认的root不行啊，只能定位到某一个文件夹了 |
Beta Was this translation helpful? Give feedback.
-
|
我挂载完打开 只是定位到其中一个文件夹，请问如何解决呀 |
Beta Was this translation helpful? Give feedback.
-
|
太难了 在境外用国内的盘速度很慢 不知道是不是网络限制的原因还是其它什么原因。。想用谷歌和pikpak 根目录又获取不了 ~~ |
Beta Was this translation helpful? Give feedback.
-
|
pikpak加载不出来，可能是网络的原因，我的电信网络正常访问，要是移动网络是无法访问的，很看地区网络，试试科学到新加坡访问 |
Beta Was this translation helpful? Give feedback.
-
|
3.2.1版本，挂载pikpak，302重定向。 |
Beta Was this translation helpful? Give feedback.
-
|
我也是这样子 |
Beta Was this translation helpful? Give feedback.
-
|
这个是PikPak限制，不是alist的问题 |
Beta Was this translation helpful? Give feedback.
-
请问群晖这个问题怎么解决？ |
Beta Was this translation helpful? Give feedback.
-
|
添加失败 总是报错 ：Failed init storage: invalid_account_or_password |
Beta Was this translation helpful? Give feedback.
-
|
我也是，不知朋友搞定了没有 |
Beta Was this translation helpful? Give feedback.
-
|
能登录查看文件，但复制时出现invalid_grant怎么解决 |
Beta Was this translation helpful? Give feedback.
-
|
要是能支持facebook账密登录就好了，之前的账号就是用fb登录的，用fb的账密直接登不行 |
Beta Was this translation helpful? Give feedback.
-
|
添加失败 总是报错 ：Failed init storage: invalid_account_or_password 对于这个问题，估计是手机登录出错，可以尝试在账号前加上国家编号，如+86，亲测有用，能正常添加以及访问。 |
Beta Was this translation helpful? Give feedback.
-
|
多谢 ，问题解决 。就是要在 账号前面 加上 +86 |
Beta Was this translation helpful? Give feedback.
-
|
加载了但是播放视频很卡，需要什么特殊设置没有？ |
Beta Was this translation helpful? Give feedback.
-
|
别用移动宽带 |
Beta Was this translation helpful? Give feedback.
-
|
pikpak挂在显示failed get objs: failed to list objs: invalid_argument； |
Beta Was this translation helpful? Give feedback.
-
|
就是要在 账号前面 加上 +86 |
Beta Was this translation helpful? Give feedback.
-
|
在挂载的时候就加了+86，要不挂不上去，我现在是挂载上去了，但是打开文件夹报错，用邮箱登录一样 |
Beta Was this translation helpful? Give feedback.
-
|
AList管理—>存储—>重新加载全部，我的pikpak就挂载上去了。 |
Beta Was this translation helpful? Give feedback.
-
|
10T空间到期后，pikpak分享挂载后访问显示：failed get objs: failed to list objs: Sorry, sharing is not available in the current region ，求大神指点 |
Beta Was this translation helpful? Give feedback.
-
|
有时还显示：failed get link: share_status_prohibited |
Beta Was this translation helpful? Give feedback.
-
|
解决了 吗 我和你一样报这个错 |
Beta Was this translation helpful? Give feedback.
-
|
我也这样解决了吗 |
Beta Was this translation helpful? Give feedback.
-
|
你好 我想请问pikpak成功挂载后 能看到文件夹 也能看到文件 但是无法播放总是显示重新连接 1 ,2 ,3,4...等等 该怎么办呢? |
Beta Was this translation helpful? Give feedback.
-
|
哈哈，解决了吗 |
Beta Was this translation helpful? Give feedback.
-
|
求助梅林alist挂载pikpak出现Failed init storage: Post "https://user.mypikpak.com/v1/auth/signin": dial tcp ************3:443: connect: connection timed out。请问怎么解决 |
Beta Was this translation helpful? Give feedback.
-
|
v3.14.0 无法从WebDAV下载文件 2023/03/24 20:51:08.510978 ERROR RESTY Get "https://api-drive.mypikpak.com/drive/v1/files?filters=%7B%22phase%22%3A%7B%22eq%22%3A%22PHASE_TYPE_COMPLETE%22%7D%2C%22trashed%22%3A%7B%22eq%22%3Afalse%7D%7D&limit=100&page_token=&parent_id=&thumbnail_size=SIZE_LARGE&with_audit=true": net/http: TLS handshake timeout, Attempt 1 |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
failed get objs: failed to list objs: oauth2: "invalid_argument" "currently not supported" |
Beta Was this translation helpful? Give feedback.
-
|
换beta版 |
Beta Was this translation helpful? Give feedback.
-
|
这是来自QQ邮箱的假期自动回复邮件。你好，我最近正在休假中，无法亲自回复你的邮件。我将在假期结束后，尽快给你回复。
|
Beta Was this translation helpful? Give feedback.
-
|
求助，添加时提示需要验证码，怎么办？ |
Beta Was this translation helpful? Give feedback.
-
|
这问题怎么解决啊：初始化存储失败，但已创建存储：初始化存储失败：发布 “https://user.mypikpak.com/v1/auth/signin”：读取 tcp ***********29：7702->***********83：443：wsarecv：远程主机强制关闭了现有连接。 |
Beta Was this translation helpful? Give feedback.
-
|
pikpak限制规则之后，直接用webdav方式挂载pikpak就可以了，稳定高效 |
Beta Was this translation helpful? Give feedback.
-
|
记得官方提供的webdav服务不是不允许写入吗 |
Beta Was this translation helpful? Give feedback.
-
|
目前确实不允许写入，但挂载alist的文件更多场景是读取，至少解决了pikpak账号挂载无法顺利读取和下载的问题，而且更新规则以后在大陆使用必须用代理服务器下载文件，有点吃不消，挂载到境外服务器的alist上下载是不需要代理的 |
Beta Was this translation helpful? Give feedback.
-
|
群晖的cloud sync用不了官方webdav无法备份至群辉差了意思RotteSya ***@***.***>於2024年9月12日 23:09寫道：
记得官方提供的webdav服务不是不允许写入吗
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
pikpak挂alist，群晖可以连alist的webdav，就可以备份了 |
Beta Was this translation helpful? Give feedback.
-
|
现在要怎么配置了？上个版本失效到现在都没设置好Orange ***@***.***>於2024年9月13日 13:39寫道：
pikpak挂alist，群晖可以连alist的webdav，就可以备份了
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
首先你要有pikpak的会员，在pikpak设置中有个实验室功能，里面有webdav相关设置和连接用的账号密码信息，启用这个功能；alist用webdav的方式挂载pikpak，比如你的pikpak文件夹结构是在根目录有个“test”文件夹，那么挂载的时候就填路径“/test”即可，填写pikpak提供的webdav的连接地址、账号和密码就可以了； |
Beta Was this translation helpful? Give feedback.
-
|
能来个配置图吗？pikpak不是会员就是废的Orange ***@***.***>於2024年9月13日 15:22寫道：
首先你要有pikpak的会员，在pikpak设置中有个实验室功能，里面有webdav相关设置和连接用的账号密码信息，启用这个功能；alist用webdav的方式挂载pikpak，比如你的pikpak文件夹结构是在根目录有个“test”文件夹，那么挂载的时候就填路径“/test”即可，填写pikpak提供的webdav的连接地址、账号和密码就可以了；
alist的webdav功能有官方文档的，地址就是“你的alist域名/dav”，如果你要挂载特定的目录，那可以写成“你的alist域名/dav/test”，比如这里就是把pikpak的test文件夹挂载到alist自定义的路径test中就这么写，账号密码就是你的alist管理员账号密码，直接连接就可以实现群晖备份pikpak文件的功能了，这里只是用了alist作为中间件处理群晖和pikpak的业务
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
这是详细设置方式，参考图内标注的信息，用的愉快。 |
Beta Was this translation helpful? Give feedback.
-
|
请问一下根文件夹路径填写什么，这里一直不对 |
Beta Was this translation helpful? Give feedback.
-
|
哥，飞牛os怎么挂远程存储 |
Beta Was this translation helpful? Give feedback.
-
|
Alist里面添加了webdav是work状态，但是点开又是错误端口443错误 |
Beta Was this translation helpful? Give feedback.
-
2.飞牛os我没用过，演示的截图是synology的DSM系统 3.如果你的alist是安装在本地，且本地网络又恰好处在pikpak不支持的国家和地区，那么你应该让alist走代理网络挂载pikpak的webdav |
Beta Was this translation helpful? Give feedback.
-
|
谢谢🙏Orange ***@***.***>於2024年9月13日 23:39寫道：
这是详细设置方式，参考图内标注的信息，用的愉快。
alist设置
群晖设置
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Request failed with status code 500 |
Beta Was this translation helpful? Give feedback.
-
|
这应该是pikpak服务器问题，pikpak的服务在新加坡阿里云机房火灾期间受很大影响一度不可用，不过最新公告称恢复了，可以试试看 |
Beta Was this translation helpful? Give feedback.
-
|
根目录填什么？是/root吗？Orange ***@***.***>於2024年9月13日 23:39寫道：
这是详细设置方式，参考图内标注的信息，用的愉快。
alist设置
群晖设置
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Failed init storage: ErrorCode: 3 ,Error: invalid_argument ,ErrorDescription: x-client-id required |
Beta Was this translation helpful? Give feedback.
-
|
这应该是pikpak服务器问题，pikpak的服务在新加坡阿里云机房火灾期间受很大影响一度不可用，不过最新公告称恢复了，可以试试看 |
Beta Was this translation helpful? Give feedback.
-
|
谢谢，确实很没挂科学网络的问题Orange ***@***.***>於2024年9月25日 00:23寫道：
根文件夹路径就是”/“，比如你挂载pikpak默认的文件夹”my pack“这个文件夹，就写入”/my pack“就可以了
2.飞牛os我没用过，演示的截图是synology的DSM系统
3.如果你的alist是安装在本地，且本地网络又恰好处在pikpak不支持的国家和地区，那么你应该让alist走代理网络挂载pikpak的webdav
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
现在我用这个存储类型感觉很奇怪，首先，如果你只需要读取的话，并且你有pikpak会员的话，确实使用pikpak自带的webdav挂载到alist上，就能用了。但是如果你需要写文件，那就不行了，因为官方的webdav是只允许读取的，不支持写入。 所以要写入的话，只能用pikpak账号密码、refresh token的方式，把pikpak挂载到alist上。但是这么搞的话，经常会出现refresh token过期的问题，部署上第一天能用，第二天就用不了，所以感觉如果是要写入的话，这个存储基本上就不可用 我自己的使用场景，是pikpak 挂载到alist上，然后再用rclone挂载alist的webdav到本地使用，然后脚本定时复制文件到挂载目录，用来备份文件使用。但是由于经常出现refresh token过期、被其他设备刷新的问题，导致这个方案基本上不可用，所以我想了解下有没有改进的方法，因为写不了确实很蛋疼。 |
Beta Was this translation helpful? Give feedback.
-
|
后续：改用阿里云对象存储了，免费5g，备份的话也无流量费用 |
Beta Was this translation helpful? Give feedback.
-
|
写个脚本只保留最新的2份 |
Beta Was this translation helpful? Give feedback.
-
|
Failed load storage: failed init storage: Post "https://user.mypikpak.com/v1/auth/token?client_id=YUMx5nI8ZU8Ap8pn": tls: failed to verify certificate: x509: certificate is not valid for any names, but wanted to match user.mypikpak.com 怎么出错了？ |
Beta Was this translation helpful? Give feedback.
-
|
failed get objs: failed to list objs: Get "https://api-drive.mypikpak.com/drive/v1/files?filters=%7B%22phase%22%3A%7B%22eq%22%3A%22PHASE_TYPE_COMPLETE%22%7D%2C%22trashed%22%3A%7B%22eq%22%3Afalse%7D%7D&limit=100&page_token=&parent_id=VNyIu3SCXFvgpfo5PjfvcZE5o1&thumbnail_size=SIZE_LARGE&with_audit=true": tls: failed to verify certificate: x509: certificate is not valid for any names, but wanted to match api-drive.mypikpak.com |
Beta Was this translation helpful? Give feedback.
and others
-
zh/guide/drivers/pikpak
AList v3的文档
https://alist.nn.ci/zh/guide/drivers/pikpak.html
Beta Was this translation helpful? Give feedback.
All reactions