Releases: CatcherITGF/NX-Venom
Releases · CatcherITGF/NX-Venom
4.4.3
- Update Sys-Clk to oc8 final3
- Reversenx sync now respects clock cappings
- Fixed issue of sys-clk not working on boot for some people
- Minor bug fixes and optimization
- Fixed auto cpu boost
- Updated OC Switchcraft to 1.2.3
- GPU UV2 revised, should improve the stability of some switches (Erista)
- GPU auto vmin fine tuning, improved accuracy for some speedos (Mariko)
4.4.2
- Updated Switchcraft to 1.2.2 pre-release
- Erista GPU UV tables
- UV1 = Medel's GPU UV table with an offset of +30mV
- UV2 = Experimental dynamic high UV table
- UV3 = Static Custom Table
- Erista GPU UV tables
- Update SC Wizard
- Unset changed to Auto for GPU Vmin
4.4.1
- Updated Switchcraft to 1.2.1 pre-release
- 1305 MHz is now only available if GPU Scheduling is ON (Mariko)
- Added an additional DVB voltage step for (Erista)
- CPU UV2&3 enables 2295 MHz (Erista)
- Updated SC Wizard
- Switchcraft 1.2.1 support
- Updated System Tweaks
- Added GPU Scheduling option (default OFF)
4.4.0
- Updated Uberhand to 2.2.5
- GPU performance increased by ~5% for all frequencies
- Updated System Installer
- Progress bar for installation operations
- Updated System Tweaks
- Native toggles ON/OFF
- Updated SC Wizard
- Slider for Speedo
- Extended memory freqs range to 3000mhz for Mariko
- Extended CPU boost clock to 2601mhz for Mariko
- Fixed lags when moving between menus
- Updated Info-NX to 1.0.6 DEMILITARAIZED vers (created by Cooler3D)
4.3.0
- Updated Switchcraft to 1.2 pre-release
- Erista CPU UV 1-3
- New Erista max CPU voltage range: 1200-1257 mV
- New Erista CPU vmin range: 750-850mV in 25mV steps
- Experimental Erista CPU freq
- UV 0-1: 2091 MHz
- UV 2: 2193 MHz
- UV 3: 2295 MHz
- Updated Uberhand (test version)
- Progress bar feature for Software Installer
- Update SC Wizard
- Switchcraft 1.2 support
- Adjusted Mariko GPU Vmin range 500 - 800 mV
- Adjusted Erista RAM freq range 1862 - 2400 MHz
- Changed default T4 timing, fix #6 issue
- Refactoring
- Updated SaltyNX to 0.7.4
4.2.1
- Updated Switchcraft to 1.1.1 pre-release
- Improved compatibility of CPU UV5 and 6 they are now bootable on switches where it was not possible before
- The old UV8 is now UV7
- With the new UV8 it is now possible to set a lower “High Freq Vmin” without a table shift
- Updated Uberhand to 2.1.5
- Updated SC Wizard
- Fixed Erista's CPU boost freqs range
- High Freq Vmin range changed to 710-850 mV
- Updated System Tweaks
- AIO can preserve variety configs (such as AMS, Hekate, DBI, Sys-Clk, etc) and do not overwrite files while updating NX-Venom (only for advanced users)
4.1.1
- Updated SC 1.1 loader kip
- Fixed CPU UV
- Changed default mem freq for Erista
- Updated Sys-Clk-OC to oc8f
- Fixed rnx sync logic for games that don't do mode check or not supported
- SaltyNX 0.7.3 support
- Updated SaltyNX to 0.7.3
- Updated SC Wizard
- Added "unstable" markers for 700 - 745 CPU High Freq Vmin range
4.1.0
- Removed Sigpatches, we use sys-patch sysmodule instead
- Updated Uberhand
- Fixed Speedo issue in the KM
- Moved from EOS 1.1 to Switchcraft 1.1 (b3711 fork)
- Updated Sys-Clk-OC to 0331
- Moved from EOS Wizard to SC Wizard
- Switchcraft 1.1 support
- Removed unused GPU freqs from Erista's range
- Refactoring
4.0.0
- Updated Atmosphere to 1.7.0
- Updated Hekate to 6.1.1
- Updated EOS to 1.1
- Atmosphere 1.7.0 compatible
- Accurate automatic GPU Vmin calculation
- Direct values for the first 3 timings, it allows tRAS fine-tuning
- GPU Vmin can now go lower than 590mV in dynamic GPU tables (UV1&2)
- Updated EOS Wizard
- EOS 1.1 compatible
- Update Software Installer
- Remove Linkalho, GitHub source repo no longer available
- Updated System Tweaks
- Fix Status Monitor key combo issue
- Fix AIO issue
To keep the bundle working properly, it is not recommended to upgrade to HOS 18 firmware yet!
3.5.0
- Updated EOS to 1.0
- Timing presets changed to single timings
- Latency is divided into read and write latency
- Bug fixes
- Updated EOS Wizard
- Added support for EOS 1.0