Skip to content

Latest commit

 

History

History
48 lines (33 loc) · 1.03 KB

readme.md

File metadata and controls

48 lines (33 loc) · 1.03 KB
Raw

Installation

Setup

  1. Create ssd image with Raspberry Pi Imager
  2. put ssd file into boot partition
  3. put wpa_supplicant.conf from this project into boot partition

Connect

  1. Boot up PI
  2. Connect as pi@ip and raspberry as password
  3. Create app folder:
sudo mkdir /opt/smart_meter
sudo chown pi /opt/smart_meter

  1. Copy code from this folder to the remote folder, e.g. via VS code ssh

  2. make python3 default:

see https://raspberry-valley.azurewebsites.net/Python-Default-Version/

sudo update-alternatives --list python
sudo update-alternatives --install /usr/bin/python python /usr/bin/python2.7 1
sudo update-alternatives --install /usr/bin/python python /usr/bin/python3.7 2
python --version

  1. install poetry

  2. poetry install

  3. setup ravendb

For RavenDb:

  1. explain dbs to build (debug and readings), expirs!

  2. setup service

sudo cp smartmeter.service /etc/systemd/system/smartmeter.service
sudo systemctl start smartmeter.service
sudo systemctl enable smartmeter.service