[macOS] #116

demian-mint · 2024-08-20T18:16:19Z

Describe the Issue

I have an AMD Ryzen 7 4700U processor. But I have an endless reboot when booting into recovery. Everything starts only on one core.

Reproduce the Issue

No response

Expectation

No response

Screenshots

No response

Operating System

Ubuntu 22.04

Kernel

Linux

Processor

AMD Ryzen 7 4700U

RAM (in GB)

24

GPU(s)

AMD ATI 04:00.0 Renoir

Version

0.12.2

Branch

main

Generated Script File

#!/usr/bin/env bash
# shellcheck disable=SC2054

#
#   APC-RUN_20-08-2024_20-49-18
#
#   THIS FILE WAS GENERATED USING AUTOPILOT.
#
#   To boot this script, run the following command:
#   $ ./boot.sh
#

#
#	boot.sh
#	Created by Coopydood as part of the ultimate-macOS-KVM project.
#
#	Profile: https://github.com/Coopydood
#	Repo: https://github.com/Coopydood/ultimate-macOS-KVM
#
#	Adapted from OSX-KVM among others.
#	Greetz to TheNickDude, Dortania, khoalia, foxlet, and other contributors :]
#


ID="macOS"
NAME="macOS 12"
FILE="boot.sh"

ULTMOS=0.12.2
IGNORE_FILE=0
REQUIRES_SUDO=0
VFIO_PTA=0
VFIO_DEVICES=0
GEN_EPOCH=1724186958
FEATURE_LEVEL=7
VERBOSE=1
DISCORD_RPC=1
DISCORD_RPC_IMG="default"

SCREEN_RES="1280x720"

ALLOCATED_RAM="6G"
CPU_SOCKETS="2"
CPU_CORES="2"
CPU_THREADS="4"
CPU_MODEL="host"
CPU_FEATURE_ARGS="+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check"

REPO_PATH="/home/demian/ultimate-macOS-KVM"
OVMF_DIR="/home/demian/ultimate-macOS-KVM/ovmf"

VFIO_ID_0="$USR_VFIO_ID_0"
VFIO_ID_1="$USR_VFIO_ID_1"
VFIO_ROM="$USR_VFIO_ROM"

USB_DEVICES="$USR_USB_DEVICES"

NETWORK_DEVICE="vmxnet3"
MAC_ADDRESS="00:16:cb:00:21:09"

OS_ID="Monterey"

HDD_PATH="$REPO_PATH/HDD.qcow2"
DISK_TYPE="SSD"

#   You should not have to touch anything below this line, especially if you
#   don't really know what you're doing. It'll probably break something.

args=(
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
-enable-kvm -m "$ALLOCATED_RAM" -cpu "$CPU_MODEL",kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,"$CPU_FEATURE_ARGS"
-machine q35
-boot menu=on,splash-time=5
#-device usb-ehci,id=ehci
#-device qemu-xhci,id=xhci
-usb -device usb-kbd -device usb-tablet 
#USB_DEV_BEGIN
#USB_DEV_END
-smp "$CPU_THREADS",cores="$CPU_CORES",sockets="$CPU_SOCKETS"
-device pcie-root-port,bus=pcie.0,slot=1,x-speed=16,x-width=32
#VFIO_DEV_BEGIN
#VFIO_DEV_END
-device isa-applesmc,osk="ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
-drive if=pflash,format=raw,readonly=on,file="$OVMF_DIR/OVMF_CODE.fd"
-drive if=pflash,format=raw,file="$OVMF_DIR/OVMF_VARS.fd"
-smbios type=2
-device ich9-intel-hda -device hda-duplex
-device ich9-ahci,id=sata
-drive id=OpenCore,if=none,format=qcow2,file="$REPO_PATH/boot/OpenCore.qcow2"
-drive id=HDD,if=none,file="$HDD_PATH",format=qcow2
-device ide-hd,bus=sata.2,drive=OpenCore,bootindex=1
-device ide-hd,bus=sata.3,drive=HDD,rotation_rate=1

############## REMOVE THESE LINES AFTER MACOS INSTALLATION ###############
-drive id=BaseSystem,if=none,file="$REPO_PATH/BaseSystem.img",format=raw
-device ide-hd,bus=sata.4,drive=BaseSystem
##########################################################################

-netdev user,id=net0 -device "$NETWORK_DEVICE",netdev=net0,id=net0,mac="$MAC_ADDRESS"
-device qxl-vga,vgamem_mb=128,vram_size_mb=128    
-monitor stdio
#-display none
#-vga qxl

################ UNCOMMENT IF YOU WANT TO USE VNC MONITOR ################
#-vnc 0.0.0.0:1,password=on -k en-us
##########################################################################

)

while getopts d: flag
do
    case "${flag}" in
        d) DISCORD_RPC=${OPTARG};;
    esac
done

if [ $VERBOSE = 1 ]
then
echo
echo \ \ \──────────────────────────────────────────────
echo \ \ \ \ \ $FILE
echo \ \ \ \ \ $ID $OS_ID
echo
echo \ \ \ \ \ Built with ULTMOS v$ULTMOS
echo \ \ \ \ \ Using $CPU_MODEL CPU model
if [ $REQUIRES_SUDO = 1 ]
then
echo \ \ \ \ \ Superuser privileges enabled
fi
if [ $VFIO_PTA = 1 ]
then
echo \ \ \ \ \ Passthrough enabled
else
echo \ \ \ \ \ Passthrough disabled
fi
if [ $DISCORD_RPC = 1 ]
then
echo \ \ \ \ \ Discord RPC enabled
else
echo \ \ \ \ \ Discord RPC disabled
fi
echo \ \ \──────────────────────────────────────────────
echo
fi

if [ $DISCORD_RPC = 1 ]
then
"$REPO_PATH/scripts/drpc.py" --os "$OS_ID" --pt $VFIO_DEVICES --wd "$REPO_PATH" --show "$DISCORD_RPC_IMG" &
fi

qemu-system-x86_64 "${args[@]}"

if [ $DISCORD_RPC = 1 ]
then
pkill -f drpc.py
fi

Generated XML File (if applicable)

<!--
	 
	    APC-RUN_20-08-2024_20-49-23
 
    THIS FILE WAS GENERATED USING AUTOPILOT.
				 
     To be used with virsh / virt-manager.
	 
	
	./boot.xml	
	Created by Coopydood as part of the ultimate-macOS-KVM project.
	
	Profile: https://github.com/Coopydood
	Repo: https://github.com/Coopydood/ultimate-macOS-KVM

-->

<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0" type="kvm">
  <name>ultmos-12</name>
  <title>macOS Monterey (ULTMOS)</title>
  <description>  macOS Monterey
  Converted from ./boot.sh 

  This virtual machine was created using ultimate-macOS-KVM, a project by Coopydood.
  Visit https://github.com/Coopydood/ultimate-macOS-KVM for help and support, or provide some feedback!

  DEBUG
  ULTMOS: v0.12.2
  XML: ./boot.xml
  AP: ./boot.sh
  APFLOW: Yes
  AUTO: Yes
  USEBLOBS: Yes
  RUNTIME: 20:49:23 20/08/2024
  </description>
  <uuid>58fca237-fe2f-4a44-9b2f-deef244b0917</uuid>
  <memory unit="KiB">6291456</memory>
  <currentMemory unit="KiB">6291456</currentMemory>
  <vcpu placement="static">4</vcpu>
  <os>
    <type arch="x86_64" machine="pc-q35-4.2">hvm</type>
    <loader readonly="yes" type="pflash">/home/demian/ultimate-macOS-KVM/ovmf/OVMF_CODE.fd</loader>
    <nvram>/home/demian/ultimate-macOS-KVM/ovmf/OVMF_VARS.fd</nvram>
    <boot dev="hd"/>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode="host-passthrough" check="none" migratable="on">
    <topology sockets="1" dies="1" cores="2" threads="2"/>
  </cpu>
  <clock offset="utc">
    <timer name="rtc" tickpolicy="catchup"/>
    <timer name="pit" tickpolicy="delay"/>
    <timer name="hpet" present="no"/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/bin/qemu-system-x86_64</emulator>
    <disk type="file" device="disk">
      <driver name="qemu" type="qcow2"/>
      <source file="/home/demian/ultimate-macOS-KVM/boot/OpenCore.qcow2"/>
      <target dev="sda" bus="sata"/>
      <address type="drive" controller="0" bus="0" target="0" unit="0"/>
    </disk>
    <disk type="file" device="disk"> <!-- HDD HEADER -->
      <driver name="qemu" type="qcow2"/>
      <source file="/home/demian/ultimate-macOS-KVM/HDD.qcow2"/>
      <target dev="sdb" bus="sata" rotation_rate="1"/>
      <address type="drive" controller="0" bus="0" target="0" unit="1"/>
    </disk> <!-- HDD FOOTER -->

<!--############# REMOVE THESE LINES AFTER MACOS INSTALLATION #############-->

    <disk type="file" device="disk"> 
      <driver name="qemu" type="raw"/>
      <source file="/home/demian/ultimate-macOS-KVM/BaseSystem.img"/>
      <target dev="sdc" bus="sata"/>
      <address type="drive" controller="0" bus="0" target="0" unit="2"/>
	  </disk> 

<!--#######################################################################-->

    <controller type="sata" index="0">
      <address type="pci" domain="0x0000" bus="0x00" slot="0x1f" function="0x2"/>
    </controller>
    <controller type="pci" index="0" model="pcie-root"/>
    <controller type="pci" index="1" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="1" port="0x8"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x0" multifunction="on"/>
    </controller>
    <controller type="pci" index="2" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="2" port="0x9"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x1"/>
    </controller>
    <controller type="pci" index="3" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="3" port="0xa"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x2"/>
    </controller>
    <controller type="pci" index="4" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="4" port="0xb"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x3"/>
    </controller>
    <controller type="pci" index="5" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="5" port="0xc"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x4"/>
    </controller>
    <controller type="pci" index="6" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="6" port="0xd"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x5"/>
    </controller>
    <controller type="pci" index="7" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="7" port="0xe"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x6"/>
    </controller>
    <controller type="pci" index="8" model="pcie-root-port">
      <model name="pcie-root-port"/>
      <target chassis="8" port="0xf"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x01" function="0x7"/>
    </controller>
    <controller type="pci" index="9" model="pcie-to-pci-bridge">
      <model name="pcie-pci-bridge"/>
      <address type="pci" domain="0x0000" bus="0x01" slot="0x00" function="0x0"/>
    </controller>
    <controller type="usb" index="0" model="ich9-ehci1">
      <address type="pci" domain="0x0000" bus="0x00" slot="0x1d" function="0x7"/>
    </controller>
    <controller type="usb" index="0" model="ich9-uhci1">
      <master startport="0"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x1d" function="0x0" multifunction="on"/>
    </controller>
    <controller type="usb" index="0" model="ich9-uhci2">
      <master startport="2"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x1d" function="0x1"/>
    </controller>
    <controller type="usb" index="0" model="ich9-uhci3">
      <master startport="4"/>
      <address type="pci" domain="0x0000" bus="0x00" slot="0x1d" function="0x2"/>
    </controller>
    <interface type="network">
      <mac address="00:16:cb:00:21:09"/>
      <source network="default"/>
      <model type="vmxnet3"/>
      <address type="pci" domain="0x0000" bus="0x09" slot="0x02" function="0x0"/>
    </interface>
    <serial type="pty">
      <target type="isa-serial" port="0">
        <model name="isa-serial"/>
      </target>
    </serial>
    <console type="pty">
      <target type="serial" port="0"/>
    </console>
    <input type="mouse" bus="ps2"/>
    <input type="keyboard" bus="ps2"/>
    <input type="keyboard" bus="usb">
      <address type="usb" bus="0" port="3"/>
    </input>
    <input type="mouse" bus="usb">
      <address type="usb" bus="0" port="4"/>
    </input>
    <graphics type="spice">
      <listen type="none"/>
    </graphics>
    <sound model="ich9">
	  <address type="pci" domain="0x0000" bus="0x00" slot="0x1b" function="0x0"/>
	</sound>
    <audio id="1" type="none"/>
    <video>
      <model type="vga" vram="16384" heads="1" primary="yes"/>
      <address type="pci" domain="0x0000" bus="0x09" slot="0x01" function="0x0"/>
    </video>
    <!-- VFIO-PCI HEADER -->
    <!-- USB HEADER -->
    <!--<watchdog model="itco" action="reset"/> -->
    <memballoon model="none"/>
  </devices>
  <qemu:commandline>
    <qemu:arg value="-global"/>
    <qemu:arg value="ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off"/>
    <qemu:arg value="-device"/>
    <qemu:arg value="isa-applesmc,osk=ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=2"/>
    <qemu:arg value="-cpu"/>
    <qemu:arg value="Haswell-noTSX,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check"/>
    <qemu:arg value="-global"/>
    <qemu:arg value="nec-usb-xhci.msi=off"/>
    <!-- NVME HEADER -->
  </qemu:commandline>
</domain>

Generated Log File

No response

Additional Information

No response

Coopydood · 2024-09-14T13:35:20Z

Hi,

It appears to be because you have CPU_SOCKETS set to 2. This should only ever be 1.

Cheers

demian-mint added Bug Something isn't working Pending The issue or pull request is being reviewed labels Aug 20, 2024

demian-mint assigned Coopydood Aug 20, 2024

Coopydood added Need More Info Further information is requested and removed Pending The issue or pull request is being reviewed labels Sep 14, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[macOS] #116

[macOS] #116

demian-mint commented Aug 20, 2024 •

edited

Loading

Coopydood commented Sep 14, 2024

[macOS] #116

[macOS] #116

Comments

demian-mint commented Aug 20, 2024 • edited Loading

Describe the Issue

Reproduce the Issue

Expectation

Screenshots

Operating System

Kernel

Processor

RAM (in GB)

GPU(s)

Version

Branch

Generated Script File

Generated XML File (if applicable)

Generated Log File

Additional Information

Coopydood commented Sep 14, 2024

demian-mint commented Aug 20, 2024 •

edited

Loading