Healpix-3.11-fasrc01.spec

#------------------- package info ----------------------------------------------

#
# enter the simple app name, e.g. myapp
#
Name: %{getenv:NAME}

#
# enter the app version, e.g. 0.0.1
#
Version: %{getenv:VERSION}

#
# enter the release; start with fasrc01 (or some other convention for your 
# organization) and increment in subsequent releases
#
# the actual "Release", %%{release_full}, is constructed dynamically; for Comp 
# and MPI apps, it will include the name/version/release of the apps used to 
# build it and will therefore be very long
#
%define release_short %{getenv:RELEASE}

#
# enter your FIRST LAST <EMAIL>
#
Packager: %{getenv:FASRCSW_AUTHOR}

#
# enter a succinct one-line summary (%%{summary} gets changed when the debuginfo 
# rpm gets created, so this stores it separately for later re-use); do not 
# surround this string with quotes
#
%define summary_static Data Analysis, Simulations and Visualization on the Sphere
Summary: %{summary_static}

#
# enter the url from where you got the source; change the archive suffix if 
# applicable
#
URL:  http://downloads.sourceforge.net/project/healpix/Healpix_3.11/Healpix_3.11_2013Apr24.tar.gz
Source: %{name}_%{version}_2013Apr24.tar.gz

#
# there should be no need to change the following
#

#these fields are required by RPM
Group: fasrcsw
License: see COPYING file or upstream packaging

#this comes here since it uses Name and Version but dynamically computes Release, Prefix, etc.
%include fasrcsw_defines.rpmmacros

Release: %{release_full}
Prefix: %{_prefix}


#
# enter a description, often a paragraph; unless you prefix lines with spaces, 
# rpm will format it, so no need to worry about the wrapping
#
%description
Software for pixelization, hierarchical indexation, synthesis, analysis, and visualization of data on the sphere.


#------------------- %%prep (~ tar xvf) ---------------------------------------

%prep


#
# FIXME
#
# unpack the sources here.  The default below is for standard, GNU-toolchain 
# style things -- hopefully it'll just work as-is.
#

umask 022
cd "$FASRCSW_DEV"/rpmbuild/BUILD 
rm -rf %{name}_%{version}
tar xvf "$FASRCSW_DEV"/rpmbuild/SOURCES/%{name}_%{version}_2013Apr24.tar.*
cd %{name}_%{version}
chmod -Rf a+rX,u+w,g-w,o-w .



#------------------- %%build (~ configure && make) ----------------------------

%build

#(leave this here)
%include fasrcsw_module_loads.rpmmacros


#
# FIXME
#
# configure and make the software here.  The default below is for standard 
# GNU-toolchain style things -- hopefully it'll just work as-is.
# 

##prerequisite apps (uncomment and tweak if necessary).  If you add any here, 
##make sure to add them to modulefile.lua below, too!
module load cfitsio

%define cfitsiohome ${CFITSIO_HOME}
%define cfitsioinclude ${CFITSIO_INCLUDE}
%define cfitsiolib ${CFITSIO_LIB}
%define builddir ${FASRCSW_DEV}/rpmbuild/BUILD/%{name}_%{version}

export healpixtarget=basic_gcc
test "%{comp_name}" == "intel" && healpixtarget=linux_icc

test -z $CC && CC=gcc
test -z $FC && FC=gfortran

umask 022
cd "$FASRCSW_DEV"/rpmbuild/BUILD/%{name}_%{version}

cat > Makefile.patch <<EOF
7,11c7,11
< ALL       = c-void cpp-void f90-void healpy-void 
< TESTS     = c-void cpp-void f90-void healpy-void 
< CLEAN     = c-void cpp-void f90-void healpy-void 
< TIDY      = c-void cpp-void f90-void healpy-void 
< DISTCLEAN = c-void cpp-void f90-void healpy-void 
---
> ALL       = c-all cpp-void f90-all healpy-void 
> TESTS     = c-test cpp-void f90-test healpy-void 
> CLEAN     = c-clean cpp-void f90-clean healpy-void 
> TIDY      = c-tidy cpp-void f90-tidy healpy-void 
> DISTCLEAN = c-distclean cpp-void f90-distclean healpy-void 
16,21c16,21
< HEALPIX=
< F90_BINDIR	=
< F90_INCDIR	=
< F90_LIBDIR	=
< FITSDIR	= 
< LIBFITS	= 
---
> HEALPIX   = %builddir
> F90_BINDIR    =  %builddir/bin
> F90_INCDIR    =  %builddir/include
> F90_LIBDIR    =  %builddir/lib
> FITSDIR   = $CFITSIO_LIB
> LIBFITS   = cfitsio
23,24c23,24
< F90_FFTSRC  = 
< F90_ADDUS   = 
---
> F90_FFTSRC    = healpix_fft
> F90_ADDUS =  
28,35c28,35
< F90_FC	= 
< F90_FFLAGS	= 
< F90_CC	= 
< F90_CFLAGS	= 
< F90_LDFLAGS	=
< F90_AR      = 
< F90_PPFLAGS =
< F90_I8FLAG  = 
---
> F90_FC    = $FC
> F90_FFLAGS    = -O3 -I\$(F90_INCDIR) -DGFORTRAN -fno-second-underscore -fopenmp -fPIC
> F90_CC    = $CC
> F90_CFLAGS    = -O3 -std=c99 -DgFortran -fopenmp -fPIC
> F90_LDFLAGS   = -L\$(F90_LIBDIR) -L\$(FITSDIR) -lhealpix -lhpxgif -l\$(LIBFITS) -Wl,-R\$(FITSDIR)
> F90_AR        = ar -rsv
> F90_PPFLAGS   = 
> F90_I8FLAG  = -fdefault-integer-8
37,38c37,38
< F90_PGFLAG  =
< F90_PGLIBS  =
---
> F90_PGFLAG  = 
> F90_PGLIBS  = 
40c40
< F90_MOD	=
---
> F90_MOD   = mod
42c42
< F90_OS	=
---
> F90_OS    = Linux
54,56c54,56
< C_CC  = 
< C_PIC = 
< C_OPT = 
---
> C_CC        = $CC
> C_PIC       = -fPIC
> C_OPT       = -O2 -Wall
59,61c59,61
< C_LIBDIR = 
< C_INCDIR = 
< C_AR     = 
---
> C_LIBDIR      = %builddir/lib
> C_INCDIR      = %builddir/include
> C_AR        = ar -rsv
64,66c64,66
< C_CFITSIO_INCDIR = 
< C_CFITSIO_LIBDIR = 
< C_WLRPATH = 
---
> C_CFITSIO_INCDIR = $CFITSIO_INCLUDE
> C_CFITSIO_LIBDIR = $CFITSIO_LIB
> C_WLRPATH = -Wl,-R${CFITSIO_LIB}
69c69
< C_ALL =
---
> C_ALL     = c-static
76c76
< HEALPIX_TARGET =
---
> HEALPIX_TARGET = %healpixtarget
78,79c78,79
< CFITSIO_EXT_LIB=
< CFITSIO_EXT_INC=
---
> CFITSIO_EXT_LIB = -L%cfitsiolib -lcfitsio
> CFITSIO_EXT_INC = -I%cfitsioinclude
EOF

patch -o Makefile Makefile.in Makefile.patch

#Fix screwed up Makefile
sed -i -e 's?@cp -p libsharp_healpix_f.a $(LIBDIR)/?@cp -p libsharp_healpix_f.a $(LIBDIR)?' src/f90/sharp/Makefile

#Create include, bin, and lib dirs
for d in %builddir/lib %builddir/include %builddir/bin
do
    mkdir -p $d || echo "Directory $d exists"
done

make



#------------------- %%install (~ make install + create modulefile) -----------

%install

#(leave this here)
%include fasrcsw_module_loads.rpmmacros


#
# FIXME
#
# make install here.  The default below is for standard GNU-toolchain style 
# things -- hopefully it'll just work as-is.
#
# Note that DESTDIR != %{prefix} -- this is not the final installation.  
# Rpmbuild does a temporary installation in the %{buildroot} and then 
# constructs an rpm out of those files.  See the following hack if your app 
# does not support this:
#
# https://github.com/fasrc/fasrcsw/blob/master/doc/FAQ.md#how-do-i-handle-apps-that-insist-on-writing-directly-to-the-production-location
#
# %%{buildroot} is usually ~/rpmbuild/BUILDROOT/%{name}-%{version}-%{release}.%{arch}.
# (A spec file cannot change it, thus it is not inside $FASRCSW_DEV.)
#

umask 022
cd "$FASRCSW_DEV"/rpmbuild/BUILD/%{name}_%{version}
echo %{buildroot} | grep -q %{name}_%{version} && rm -rf %{buildroot}
mkdir -p %{buildroot}/%{_prefix}
cp -r {bin,include,lib}  %{buildroot}/%{_prefix}

#(this should not need to be changed)
#these files are nice to have; %%doc is not as prefix-friendly as I would like
#if there are other files not installed by make install, add them here
for f in COPYING AUTHORS README INSTALL ChangeLog NEWS THANKS TODO BUGS; do
	test -e "$f" && ! test -e '%{buildroot}/%{_prefix}/'"$f" && cp -a "$f" '%{buildroot}/%{_prefix}/'
done

#(this should not need to be changed)
#this is the part that allows for inspecting the build output without fully creating the rpm
%if %{defined trial}
	set +x
	
	echo
	echo
	echo "*************** fasrcsw -- STOPPING due to %%define trial yes ******************"
	echo 
	echo "Look at the tree output below to decide how to finish off the spec file.  (\`Bad"
	echo "exit status' is expected in this case, it's just a way to stop NOW.)"
	echo
	echo
	
	tree '%{buildroot}/%{_prefix}'

	echo
	echo
	echo "Some suggestions of what to use in the modulefile:"
	echo
	echo

	generate_setup.sh --action echo --format lmod --prefix '%%{_prefix}'  '%{buildroot}/%{_prefix}'

	echo
	echo
	echo "******************************************************************************"
	echo
	echo
	
	#make the build stop
	false

	set -x
%endif

# 
# FIXME (but the above is enough for a "trial" build)
#
# This is the part that builds the modulefile.  However, stop now and run 
# `make trial'.  The output from that will suggest what to add below.
#
# - uncomment any applicable prepend_path things (`--' is a comment in lua)
#
# - do any other customizing of the module, e.g. load dependencies -- make sure 
#   any dependency loading is in sync with the %%build section above!
#
# - in the help message, link to website docs rather than write anything 
#   lengthy here
#
# references on writing modules:
#   http://www.tacc.utexas.edu/tacc-projects/lmod/advanced-user-guide/writing-module-files
#   http://www.tacc.utexas.edu/tacc-projects/lmod/system-administrator-guide/initial-setup-of-modules
#   http://www.tacc.utexas.edu/tacc-projects/lmod/system-administrator-guide/module-commands-tutorial
#

mkdir -p %{buildroot}/%{_prefix}
cat > %{buildroot}/%{_prefix}/modulefile.lua <<EOF
local helpstr = [[
%{name}-%{version}-%{release_short}
%{summary_static}
]]
help(helpstr,"\n")

whatis("Name: %{name}")
whatis("Version: %{version}-%{release_short}")
whatis("Description: %{summary_static}")

---- prerequisite apps (uncomment and tweak if necessary)
if mode()=="load" then
	if not isloaded("cfitsio") then
		load("cfitsio/3360-fasrc02")
	end
end

---- environment changes (uncomment what's relevant)
setenv("HEALPIX_HOME",              "%{_prefix}")
setenv("HEALPIX_INCLUDE",           "%{_prefix}/include")
setenv("HEALPIX_LIB",               "%{_prefix}/lib")
prepend_path("PATH",                "%{_prefix}/bin")
prepend_path("CPATH",               "%{_prefix}/include")
prepend_path("LD_LIBRARY_PATH",     "%{_prefix}/lib")
prepend_path("LIBRARY_PATH",        "%{_prefix}/lib")
EOF



#------------------- %%files (there should be no need to change this ) --------

%files

%defattr(-,root,root,-)

%{_prefix}/*



#------------------- scripts (there should be no need to change these) --------


%pre
#
# everything in fasrcsw is installed in an app hierarchy in which some 
# components may need creating, but no single rpm should own them, since parts 
# are shared; only do this if it looks like an app-specific prefix is indeed 
# being used (that's the fasrcsw default)
#
echo '%{_prefix}' | grep -q '%{name}.%{version}' && mkdir -p '%{_prefix}'
#

%post
#
# symlink to the modulefile installed along with the app; we want all rpms to 
# be relocatable, hence why this is not a proper %%file; as with the app itself, 
# modulefiles are in an app hierarchy in which some components may need 
# creating
#
mkdir -p %{modulefile_dir}
ln -s %{_prefix}/modulefile.lua %{modulefile}
#


%preun
#
# undo the module file symlink done in the %%post; do not rmdir 
# %%{modulefile_dir}, though, since that is shared by multiple apps (yes, 
# orphans will be left over after the last package in the app family 
# is removed)
#
test -L '%{modulefile}' && rm '%{modulefile}'
#

%postun
#
# undo the last component of the mkdir done in the %%pre (yes, orphans will be 
# left over after the last package in the app family is removed); also put a 
# little protection so this does not cause problems if a non-default prefix 
# (e.g. one shared with other packages) is used
#
test -d '%{_prefix}' && echo '%{_prefix}' | grep -q '%{name}.%{version}' && rmdir '%{_prefix}'
#


%clean
#
# wipe out the buildroot, but put some protection to make sure it isn't 
# accidentally / or something -- we always have "rpmbuild" in the name
#
echo '%{buildroot}' | grep -q 'rpmbuild' && rm -rf '%{buildroot}'
#