Why is my espresense-companion Calibration screen empty?

[RaoulSargent]

I am looking for help as to why my Calibration screen contains no information, totally empty.
What am I missing?

Other than the calibration screen, the map/devices/nodes screens all seem to be operating as I would expect.

Running Companion v1.5.1 (downloaded container from Docker Hub on Sun 3rd Dec 2023).

I have:
1x esp32 D1 mini running espresense v3.3.2b3
14x esp32 D1 mini running espresense v3.3.1
1x esp32 D1 mini running espresense v3.2.4

My Calibration screen looks like this:

And here is a snippet from my configuration file:

[DTTerastar]

Did you put some stuff in include on the nodes but not put in node: ? Those are what drive that screen.

[RaoulSargent]

To limit the mqtt messaging, on each esp32 node I have put the same list of the iphones/watches I wish to track in the "Filtering / Include" field.
example: "R_iPhone R_watch V_iPhone V_watch"

I also have the following in the "Filtering / Exclude" field:
"exp:20 sd: msft sonos apple samsung name:"

I didn't quite understand the second part of your answer, "...but not in the node"
Are you saying I need to add the "?" (question mark) in the include field?

[RaoulSargent]

Further to my previous reply I have now added each esp32 'name' to the include field list on all nodes,

and the following line in the config file:

• id: “node:*”

Now starting to see info in the calibration page.