TwinkleFOX.h

//  TwinkleFOX by Mark Kriegsman: https://gist.github.com/kriegsman/756ea6dcae8e30845b5a
//
//  TwinkleFOX: Twinkling 'holiday' lights that fade in and out.
//  Colors are chosen from a palette; a few palettes are provided.
//
//  This December 2015 implementation improves on the December 2014 version
//  in several ways:
//  - smoother fading, compatible with any colors and any palettes
//  - easier control of twinkle speed and twinkle density
//  - supports an optional 'background color'
//  - takes even less RAM: zero RAM overhead per pixel
//  - illustrates a couple of interesting techniques (uh oh...)
//
//  The idea behind this (new) implementation is that there's one
//  basic, repeating pattern that each pixel follows like a waveform:
//  The brightness rises from 0..255 and then falls back down to 0.
//  The brightness at any given point in time can be determined as
//  as a function of time, for example:
//    brightness = sine( time ); // a sine wave of brightness over time
//
//  So the way this implementation works is that every pixel follows
//  the exact same wave function over time.  In this particular case,
//  I chose a sawtooth triangle wave (triwave8) rather than a sine wave,
//  but the idea is the same: brightness = triwave8( time ).
//
//  Of course, if all the pixels used the exact same wave form, and
//  if they all used the exact same 'clock' for their 'time base', all
//  the pixels would brighten and dim at once -- which does not look
//  like twinkling at all.
//
//  So to achieve random-looking twinkling, each pixel is given a
//  slightly different 'clock' signal.  Some of the clocks run faster,
//  some run slower, and each 'clock' also has a random offset from zero.
//  The net result is that the 'clocks' for all the pixels are always out
//  of sync from each other, producing a nice random distribution
//  of twinkles.
//
//  The 'clock speed adjustment' and 'time offset' for each pixel
//  are generated randomly.  One (normal) approach to implementing that
//  would be to randomly generate the clock parameters for each pixel
//  at startup, and store them in some arrays.  However, that consumes
//  a great deal of precious RAM, and it turns out to be totally
//  unnessary!  If the random number generate is 'seeded' with the
//  same starting value every time, it will generate the same sequence
//  of values every time.  So the clock adjustment parameters for each
//  pixel are 'stored' in a pseudo-random number generator!  The PRNG
//  is reset, and then the first numbers out of it are the clock
//  adjustment parameters for the first pixel, the second numbers out
//  of it are the parameters for the second pixel, and so on.
//  In this way, we can 'store' a stable sequence of thousands of
//  random clock adjustment parameters in literally two bytes of RAM.
//
//  There's a little bit of fixed-point math involved in applying the
//  clock speed adjustments, which are expressed in eighths.  Each pixel's
//  clock speed ranges from 8/8ths of the system clock (i.e. 1x) to
//  23/8ths of the system clock (i.e. nearly 3x).
//
//  On a basic Arduino Uno or Leonardo, this code can twinkle 300+ pixels
//  smoothly at over 50 updates per second.
//
//  -Mark Kriegsman, December 2015

// Overall twinkle speed.
// 0 (VERY slow) to 8 (VERY fast).
// 4, 5, and 6 are recommended, default is 4.
//uint8_t twinkleSpeed = 4;	// Now mapped to normal speed slider

// Overall twinkle density.
// 0 (NONE lit) to 8 (ALL lit at once).
// Default is 5.
//uint8_t twinkleDensity = 5;	// Now mapped to intensity slider

// Background color for 'unlit' pixels
// Can be set to CRGB::Black if desired.
CRGB gBackgroundColor = CRGB::Black;
// Example of dim incandescent fairy light background color
// CRGB gBackgroundColor = CRGB(CRGB::FairyLight).nscale8_video(16);

// If AUTO_SELECT_BACKGROUND_COLOR is set to 1,
// then for any palette where the first two entries
// are the same, a dimmed version of that color will
// automatically be used as the background color.
#define AUTO_SELECT_BACKGROUND_COLOR 0

// If COOL_LIKE_INCANDESCENT is set to 1, colors will
// fade out slighted 'reddened', similar to how
// incandescent bulbs change color as they get dim down.
#define COOL_LIKE_INCANDESCENT 1

CRGBPalette16 twinkleFoxPalette;

// A mostly red palette with green accents and white trim.
// "CRGB::Gray" is used as white to keep the brightness more uniform.
const CRGBPalette16 RedGreenWhite_p = CRGBPalette16
(  CRGB::Red, CRGB::Red, CRGB::Red, CRGB::Red,
   CRGB::Red, CRGB::Red, CRGB::Red, CRGB::Red,
   CRGB::Red, CRGB::Red, CRGB::Gray, CRGB::Gray,
   CRGB::Green, CRGB::Green, CRGB::Green, CRGB::Green
);

// A mostly (dark) green palette with red berries.
#define Holly_Green 0x00580c
#define Holly_Red   0xB00402
const CRGBPalette16 Holly_p = CRGBPalette16
(  Holly_Green, Holly_Green, Holly_Green, Holly_Green,
   Holly_Green, Holly_Green, Holly_Green, Holly_Green,
   Holly_Green, Holly_Green, Holly_Green, Holly_Green,
   Holly_Green, Holly_Green, Holly_Green, Holly_Red
);

// A red and white striped palette
// "CRGB::Gray" is used as white to keep the brightness more uniform.
const CRGBPalette16 RedWhite_p = CRGBPalette16
(  CRGB::Red,  CRGB::Red,  CRGB::Gray, CRGB::Gray,
   CRGB::Red,  CRGB::Red,  CRGB::Gray, CRGB::Gray,
   CRGB::Red,  CRGB::Red,  CRGB::Gray, CRGB::Gray,
   CRGB::Red,  CRGB::Red,  CRGB::Gray, CRGB::Gray
);

// A mostly blue palette with white accents.
// "CRGB::Gray" is used as white to keep the brightness more uniform.
const CRGBPalette16 BlueWhite_p = CRGBPalette16
(  CRGB::Blue, CRGB::Blue, CRGB::Blue, CRGB::Blue,
   CRGB::Blue, CRGB::Blue, CRGB::Blue, CRGB::Blue,
   CRGB::Blue, CRGB::Blue, CRGB::Blue, CRGB::Blue,
   CRGB::Blue, CRGB::Gray, CRGB::Gray, CRGB::Gray
);

// A pure "fairy light" palette with some brightness variations
#define HALFFAIRY ((CRGB::FairyLight & 0xFEFEFE) / 2)
#define QUARTERFAIRY ((CRGB::FairyLight & 0xFCFCFC) / 4)
const CRGBPalette16 FairyLight_p = CRGBPalette16
(  CRGB::FairyLight, CRGB::FairyLight, CRGB::FairyLight, CRGB::FairyLight,
   HALFFAIRY,        HALFFAIRY,        CRGB::FairyLight, CRGB::FairyLight,
   QUARTERFAIRY,     QUARTERFAIRY,     CRGB::FairyLight, CRGB::FairyLight,
   CRGB::FairyLight, CRGB::FairyLight, CRGB::FairyLight, CRGB::FairyLight
);

// A palette of soft snowflakes with the occasional bright one
const CRGBPalette16 Snow_p = CRGBPalette16
(  0x304048, 0x304048, 0x304048, 0x304048,
   0x304048, 0x304048, 0x304048, 0x304048,
   0x304048, 0x304048, 0x304048, 0x304048,
   0x304048, 0x304048, 0x304048, 0xE0F0FF
);

// A palette reminiscent of large 'old-school' C9-size tree lights
// in the five classic colors: red, orange, green, blue, and white.
#define C9_Red    0xB80400
#define C9_Orange 0x902C02
#define C9_Green  0x046002
#define C9_Blue   0x070758
#define C9_White  0x606820
const CRGBPalette16 RetroC9_p = CRGBPalette16
(  C9_Red,    C9_Orange, C9_Red,    C9_Orange,
   C9_Orange, C9_Red,    C9_Orange, C9_Red,
   C9_Green,  C9_Green,  C9_Green,  C9_Green,
   C9_Blue,   C9_Blue,   C9_Blue,
   C9_White
);

// A cold, icy pale blue palette
#define Ice_Blue1 0x0C1040
#define Ice_Blue2 0x182080
#define Ice_Blue3 0x5080C0
const CRGBPalette16 Ice_p = CRGBPalette16
(
  Ice_Blue1, Ice_Blue1, Ice_Blue1, Ice_Blue1,
  Ice_Blue1, Ice_Blue1, Ice_Blue1, Ice_Blue1,
  Ice_Blue1, Ice_Blue1, Ice_Blue1, Ice_Blue1,
  Ice_Blue2, Ice_Blue2, Ice_Blue2, Ice_Blue3
);

#define Incandescent_White 0xE1A024
const CRGBPalette16 Incandescent_p = CRGBPalette16
(
	Incandescent_White, Incandescent_White, Incandescent_White, Incandescent_White,
	Incandescent_White, Incandescent_White, Incandescent_White, Incandescent_White,
	Incandescent_White, Incandescent_White, Incandescent_White, Incandescent_White,
	Incandescent_White, Incandescent_White, Incandescent_White, Incandescent_White
);

uint8_t currentTwinklePaletteIndex = 0;

const CRGBPalette16 twinklePalettes[] = {
	Incandescent_p,
	RedWhite_p,
	BlueWhite_p,
	RedGreenWhite_p,
	FairyLight_p,
	Snow_p,
	Holly_p,
	Ice_p,
	PartyColors_p,
	ForestColors_p,
	LavaColors_p,
	HeatColors_p,
	CloudColors_p,
	OceanColors_p,
	RainbowColors_p,
	RetroC9_p
};

const uint8_t twinklePaletteCount = ARRAY_SIZE(twinklePalettes);

const String twinklePaletteNames[twinklePaletteCount] = {
	"Incandescent Twinkles",
	"Red & White Twinkles",
	"Blue & White Twinkles",
	"Red, Green & White Twinkles",
	"Fairy Light Twinkles",
	"Snow 2 Twinkles",
	"Holly Twinkles",
	"Ice Twinkles",
	"Party Twinkles",
	"Forest Twinkles",
	"Lava Twinkles",
	"Fire Twinkles",
	"Cloud 2 Twinkles",
	"Ocean Twinkles",
	"Rainbow Twinkles",
	"Retro C9 Twinkles"
};

void setTwinklePalette(uint8_t value)
{
	if (value >= twinklePaletteCount) {
		value = twinklePaletteCount - 1;
	}

	currentTwinklePaletteIndex = value;

	EEPROM.write(10, currentTwinklePaletteIndex);
	eepromChanged = true;

	broadcastInt("twinklePalette", currentTwinklePaletteIndex);
}

void setTwinklePaletteName(String name)
{
	for(uint8_t i = 0; i < twinklePaletteCount; i++) {
		if(twinklePaletteNames[i] == name) {
			setTwinklePalette(i);
			break;
		}
	}
}

// This function is like 'triwave8', which produces a
// symmetrical up-and-down triangle sawtooth waveform, except that this
// function produces a triangle wave with a faster attack and a slower decay:
//
//     / \
//    /     \
//   /         \
//  /             \
//

uint8_t attackDecayWave8( uint8_t i)
{
  if( i < 86) {
    return i * 3;
  } else {
    i -= 86;
    return 255 - (i + (i/2));
  }
}

// This function takes a pixel, and if its in the 'fading down'
// part of the cycle, it adjusts the color a little bit like the
// way that incandescent bulbs fade toward 'red' as they dim.
void coolLikeIncandescent( CRGB& c, uint8_t phase)
{
  if( phase < 128) return;

  uint8_t cooling = (phase - 128) >> 4;
  c.g = qsub8( c.g, cooling);
  c.b = qsub8( c.b, cooling * 2);
}

//  This function takes a time in pseudo-milliseconds,
//  figures out brightness = f( time ), and also hue = f( time )
//  The 'low digits' of the millisecond time are used as
//  input to the brightness wave function.
//  The 'high digits' are used to select a color, so that the color
//  does not change over the course of the fade-in, fade-out
//  of one cycle of the brightness wave function.
//  The 'high digits' are also used to determine whether this pixel
//  should light at all during this cycle, based on the twinkleDensity.
CRGB computeOneTwinkle( uint32_t ms, uint8_t salt)
{
  uint16_t ticks = ms >> (8-map8(speed,4,8));	// Was twinkleSpeed. Now mapped to normal speed slider
  uint8_t fastcycle8 = ticks;
  uint16_t slowcycle16 = (ticks >> 8) + salt;
  slowcycle16 += sin8( slowcycle16);
  slowcycle16 =  (slowcycle16 * 2053) + 1384;
  uint8_t slowcycle8 = (slowcycle16 & 0xFF) + (slowcycle16 >> 8);

  uint8_t bright = 0;
  if( ((slowcycle8 & 0x0E)/2) < map8(intensity,2,8) ) {	// Was twinkleDensity. Now mapped to intensity slider
    bright = attackDecayWave8( fastcycle8);
  }

  uint8_t hue = slowcycle8 - salt;
  CRGB c;
  if( bright > 0) {
    c = ColorFromPalette( twinkleFoxPalette, hue, bright, NOBLEND);
    if( COOL_LIKE_INCANDESCENT == 1 ) {
      coolLikeIncandescent( c, fastcycle8);
    }
  } else {
    c = CRGB::Black;
  }
  return c;
}

//  This function loops over each pixel, calculates the
//  adjusted 'clock' that this pixel should use, and calls
//  "CalculateOneTwinkle" on each pixel.  It then displays
//  either the twinkle color of the background color,
//  whichever is brighter.
void drawTwinkles()
{
  twinkleFoxPalette = twinklePalettes[currentTwinklePaletteIndex];
  // "PRNG16" is the pseudorandom number generator
  // It MUST be reset to the same starting value each time
  // this function is called, so that the sequence of 'random'
  // numbers that it generates is (paradoxically) stable.
  uint16_t PRNG16 = 11337;

  uint32_t clock32 = millis();

  // Set up the background color, "bg".
  // if AUTO_SELECT_BACKGROUND_COLOR == 1, and the first two colors of
  // the current palette are identical, then a deeply faded version of
  // that color is used for the background color
  CRGB bg;
  if( (AUTO_SELECT_BACKGROUND_COLOR == 1) &&
      (twinkleFoxPalette[0] == twinkleFoxPalette[1] )) {
    bg = twinkleFoxPalette[0];
    uint8_t bglight = bg.getAverageLight();
    if( bglight > 64) {
      bg.nscale8_video( 16); // very bright, so scale to 1/16th
    } else if( bglight > 16) {
      bg.nscale8_video( 64); // not that bright, so scale to 1/4th
    } else {
      bg.nscale8_video( 86); // dim, scale to 1/3rd.
    }
  } else {
    bg = gBackgroundColor; // just use the explicitly defined background color
  }

  uint8_t backgroundBrightness = bg.getAverageLight();

  for(uint16_t i = 0; i < NUM_LEDS; i++) {
    CRGB& pixel = leds[i];

    PRNG16 = (uint16_t)(PRNG16 * 2053) + 1384; // next 'random' number
    uint16_t myclockoffset16= PRNG16; // use that number as clock offset
    PRNG16 = (uint16_t)(PRNG16 * 2053) + 1384; // next 'random' number
    // use that number as clock speed adjustment factor (in 8ths, from 8/8ths to 23/8ths)
    uint8_t myspeedmultiplierQ5_3 =  ((((PRNG16 & 0xFF)>>4) + (PRNG16 & 0x0F)) & 0x0F) + 0x08;
    uint32_t myclock30 = (uint32_t)((clock32 * myspeedmultiplierQ5_3) >> 3) + myclockoffset16;
    uint8_t  myunique8 = PRNG16 >> 8; // get 'salt' value for this pixel

    // We now have the adjusted 'clock' for this pixel, now we call
    // the function that computes what color the pixel should be based
    // on the "brightness = f( time )" idea.
    CRGB c = computeOneTwinkle( myclock30, myunique8);

    uint8_t cbright = c.getAverageLight();
    int16_t deltabright = cbright - backgroundBrightness;
    if( deltabright >= 32 || (!bg)) {
      // If the new pixel is significantly brighter than the background color,
      // use the new color.
      pixel = c;
    } else if( deltabright > 0 ) {
      // If the new pixel is just slightly brighter than the background color,
      // mix a blend of the new color and the background color
      pixel = blend( bg, c, deltabright * 8);
    } else {
      // if the new pixel is not at all brighter than the background color,
      // just use the background color.
      pixel = bg;
    }
  }
}