hpVlan.mib

HP-VLAN DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, Integer32
            FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString, PhysAddress, RowStatus
            FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP
            FROM SNMPv2-CONF
        InterfaceIndex
            FROM IF-MIB
        hpSwitch
            FROM HP-ICF-OID
        ConfigStatus
            FROM HP-ICF-TC;

    hpVlanLevelOne MODULE-IDENTITY
        LAST-UPDATED "200011030417Z"  -- November 3, 2000
        ORGANIZATION "HP Networking"
        CONTACT-INFO "Hewlett Packard Company
                      8000 Foothills Blvd.
                      Roseville, CA 95747"
        DESCRIPTION  "This MIB module describes management objects
                     used to model virtual LANs (VLANs)."

        REVISION     "200011030417Z"  -- November 3, 2000
        DESCRIPTION  "Deprecated all objects in this MIB - replaced
                     by RFC 2674."

        REVISION     "9510200000Z"  -- October 20, 1995
        DESCRIPTION  "Initial revision of this MIB module"
        ::= { hpVLAN 1 }
          
    hpVLAN                OBJECT IDENTIFIER ::= { hpSwitch  3 }

    hpVlanObjects      OBJECT IDENTIFIER ::= { hpVlanLevelOne 1 }
    hpVlanTraps        OBJECT IDENTIFIER ::= { hpVlanLevelOne 2 }
    hpVlanConformance  OBJECT IDENTIFIER ::= { hpVlanLevelOne 3 }

    VlanID ::= TEXTUAL-CONVENTION
        DISPLAY-HINT "d"
        STATUS       deprecated
        DESCRIPTION  "A unique value, greater than zero, for each
                     VLAN in the managed system. It is recommended
                     that the values are assigned contiguously starting
                     from 1."
        SYNTAX       Integer32 (1..65535)


    hpVlanNumber OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "The number of currently defined VLANs in
                    the device. Though VLANs should be created
                    using contiguous VLAN IDs, this is not
                    mandatory. Gaps in the VLAN ID sequence may
                    also result from the deletion of existing
                    VLANs. Therefore, this value represents the
                    total number of VLANs in the device and should
                    not be used to indicate the highest VLAN ID
                    value currently in use."
        ::= { hpVlanObjects 1 }
          
    -- HP VLAN Identification Objects
          
    hpVlanIdentTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpVlanIdentEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "A table describing the various VLANs that 
                    are currently defined for this device."
        ::= { hpVlanObjects 4 }
          
    hpVlanIdentEntry OBJECT-TYPE
        SYNTAX      HpVlanIdentEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The row in the hpVlanIdentTable containing 
                    the general VLAN information."
        INDEX       { hpVlanIdentIndex }
        ::= { hpVlanIdentTable 1 }
          
    HpVlanIdentEntry ::=
        SEQUENCE {
            hpVlanIdentIndex             VlanID,
            hpVlanIdentName              DisplayString,
            hpVlanIdentMode              INTEGER,
            hpVlanIdentStatus            RowStatus,
            hpVlanDot1QID                Integer32,
            hpVlanIdentState             INTEGER,
            hpVlanIdentType              INTEGER
        }
          
    hpVlanIdentIndex OBJECT-TYPE
        SYNTAX      VlanID
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The VLAN ID which uniquely identifies a row  
                    in this table." 
        ::= { hpVlanIdentEntry 1 }

    hpVlanIdentName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "The user defined textual name that is
                    associated with this VLAN."  
        ::= { hpVlanIdentEntry 2 }
          
    hpVlanIdentMode OBJECT-TYPE
        SYNTAX      INTEGER {
                        port(1),
                        mac(2)
                    }
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "The mode of this VLAN. A VLAN can be either
                    port-based or MAC address-based. A port-based
                    VLAN supports a multiple addresses per VLAN 
                    port.

                    A MAC address-based VLAN supports multiple MAC
                    addresses per port such that VLAN address tables
                    must be consulted to determine the number of VLAN
                    clients."  
               ::= { hpVlanIdentEntry 3 }
          
    hpVlanIdentStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "The status of a VLAN information entry."
        ::= { hpVlanIdentEntry 4 }

    hpVlanDot1QID OBJECT-TYPE
        SYNTAX      Integer32 (1..4095)
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "The VLAN tag ID.  802.1Q"
        ::= { hpVlanIdentEntry 5}

    hpVlanIdentState OBJECT-TYPE
        SYNTAX      INTEGER {
                        up(1),
                        down(2)
                    }
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "Current state of the VLAN.  If one port in the
                    VLAN is up, then that VLAN is up, otherwise it
                    is down."
        ::= { hpVlanIdentEntry 6 }

    hpVlanIdentType OBJECT-TYPE
        SYNTAX    INTEGER {
                             static(1),
                             dynamic(2)
                       }
        MAX-ACCESS read-create
        STATUS     deprecated
        DESCRIPTION "Type of VLAN:
                     static - VLAN is user-configured; configuration
                       information is retained in configuration file and
                       thus such VLANs are available across reboots.
                     dynamic - VLAN is managed by GVRP; configuration
                       information is NOT retained in configuration
                       file and thus such VLANs are not available
                       across reboots. They may be relearnt after a
                       reboot via GVRP activity"
        ::= { hpVlanIdentEntry 7 }
          
    -- HP VLAN Membership Tables (Member and Address Tables)
          
    hpVlanMemberTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpVlanMemberEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "A table describing the members of the various  
                    VLANs that are currently defined for this device.
                    Interfaces can be associated with a pre-defined
                    VLAN (i.e., VLANs can be created by grouping
                    existing interfaces) by adding rows to this table.
                    Likewise, deleting rows from this table removes
                    the specified interface from the VLAN. 

                    Note that certain entries in this table will
                    automatically be created when a VLAN is created,
                    such as the entry associating a VLAN with its
                    propVirtual interface to the management and/or
                    forwarding entity on the device. These entries
                    are read-only and can not be manipulated via
                    the MIB."
        ::= { hpVlanObjects 5 }
          
    hpVlanMemberEntry OBJECT-TYPE
        SYNTAX      HpVlanMemberEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The row in the hpVlanMemberTable containing the 
                    VLAN ID to Interface Group ifIndex mappings."
        INDEX       { hpVlanMemberIfIndex }
        ::= { hpVlanMemberTable 1 }
          
    HpVlanMemberEntry ::=
        SEQUENCE {
            hpVlanMemberIfIndex          InterfaceIndex,
            hpVlanMemberIndex            VlanID
        }

    hpVlanMemberIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The ifIndex value which uniquely identifies
                    a row in the Interfaces Table. The corresponding
                    row in the Interfaces Table must exist prior 
                    to the index being used in this table."
        ::= { hpVlanMemberEntry 1 }

    hpVlanMemberIndex OBJECT-TYPE
        SYNTAX      VlanID
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "The VLAN ID identifies the VLAN the interface
                    is in.  The corresponding row in the VLAN Ident
                    Table must exist prior to the index being used
                    in this table."
        ::= { hpVlanMemberEntry 2 }


    hpVlanAddrTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpVlanAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "A table describing the MAC addresses that
                    are currently associated with a specific
                    VLAN. Entries are added to and deleted
                    from this read-only table automatically
                    as they are learned from the network." 
        ::= { hpVlanObjects 6 }

    hpVlanAddrEntry OBJECT-TYPE
        SYNTAX      HpVlanAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The row in the hpVlanAddrTable containing 
                    the VLAN ID to MAC address mappings."
        INDEX       { hpVlanAddrIndex }
        ::= { hpVlanAddrTable 1 }
          
    HpVlanAddrEntry ::=
        SEQUENCE {
            hpVlanAddrIndex              VlanID,
            hpVlanAddrPhysAddress        PhysAddress
        }

    hpVlanAddrIndex OBJECT-TYPE
        SYNTAX      VlanID
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The VLAN ID which uniquely identifies a row  
                    in the VLAN Ident Table. The corresponding 
                    row in the VLAN Ident Table must exist prior 
                    to the index being present in this table."
        ::= { hpVlanAddrEntry 1 }
          
    hpVlanAddrPhysAddress OBJECT-TYPE
        SYNTAX      PhysAddress
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "The MAC address of a node that is associated 
                    with a specific VLAN as identified by the
                    object hpVlanAddrIndex."
        ::= { hpVlanAddrEntry 2 }


    hpVlanIdentConfigStatus OBJECT-TYPE
        SYNTAX      ConfigStatus
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "The status of a VLAN information table. If one or more
                    variables in this group were reconfigurated since last 
                    reboot and required reboot to take effect, the value of
                    this variable will be set to notInService."
        ::= { hpVlanObjects 7 }


    -- HP VLAN Tagging Membership table (supersedes hpVlanMemberTable)

    hpVlanMemberTable2 OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpVlanMemberEntry2
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "A table describing the VLANs on each particular port
                    along with tagging information."
        ::= { hpVlanObjects 8 }

    hpVlanMemberEntry2 OBJECT-TYPE
        SYNTAX      HpVlanMemberEntry2
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "The row in the hpVlanMemberTable2 containing the
                    VLAN ID to interface group ifIndex mappings as well
                    the VLAN tagging information."
        INDEX       { hpVlanIdentIndex, hpVlanMemberIfIndex }
        ::= { hpVlanMemberTable2 1}

    HpVlanMemberEntry2 ::=
        SEQUENCE {
            hpVlanMemberTagged2            INTEGER
        }

    hpVlanMemberTagged2 OBJECT-TYPE
        SYNTAX      INTEGER {
                        tagged(1),
                        untagged(2),
                        no(3),
                        auto(4)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "Identifies whether the particular VLan on this
                     port is tagged or not. 'no' denotes not a member
                     of that vlan.  'auto' denotes that GVRP will
                     dynamically determine the membership of this port."
        ::= { hpVlanMemberEntry2 1}


    -- HP VLAN Conformance Information

    hpVlanGroups       OBJECT IDENTIFIER ::= { hpVlanConformance 1 }
    hpVlanCompliances  OBJECT IDENTIFIER ::= { hpVlanConformance 2 }

    -- HP VLAN Compliance Statements

    hpVlanCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for HP devices
                    supporting the HP VLAN MIB."

        MODULE
            MANDATORY-GROUPS { hpVlanGeneralGroup }

            GROUP       hpVlanAddressGroup
            DESCRIPTION "This group is current for all devices
                        that maintain MAC address tables, based on
                        VLAN association, that are accessible by
                        network management (e.g., SNMP) entities."
            ::= { hpVlanCompliances 1}

    hpVlanCompliance1 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for HP devices
                    supporting the HP VLAN MIB."

        MODULE
            GROUP       hpVlanMemberGroup
            DESCRIPTION "A collection of objects for providing port
                         to VLAN mapping data."
            GROUP       hpVlanTaggingGroup
            DESCRIPTION "A collection of objects for managing tagged VLANs."
            ::= { hpVlanCompliances 2}

    -- HP VLAN Conformance Groups

    hpVlanGeneralGroup OBJECT-GROUP
        OBJECTS     { hpVlanNumber,
                      hpVlanIdentMode,
                      hpVlanIdentName, 
                      hpVlanIdentStatus }
        STATUS      deprecated
        DESCRIPTION "A collection of objects that provide
                    general information about a configured
                    VLAN. The organization of this group is
                    such that it is assumed that all devices
                    supporting VLANs associate an RFC 1573
                    interface with a VLAN even if only to
                    allow default node-to-VLAN assignment."
        ::= { hpVlanGroups 1 }

    hpVlanAddressGroup OBJECT-GROUP
        OBJECTS     { hpVlanAddrPhysAddress }
        STATUS      deprecated
        DESCRIPTION "A collection of objects that contain VLAN
                    to MAC address mapping data."
        ::= { hpVlanGroups 2 }

    hpVlanMemberGroup OBJECT-GROUP
        OBJECTS     { hpVlanMemberIndex }
        STATUS      deprecated
        DESCRIPTION "A collection of objects for providing port
                    to VLAN mapping data."
        ::= { hpVlanGroups 3 }

    hpVlanTaggingGroup OBJECT-GROUP
        OBJECTS     { hpVlanDot1QID,
                      hpVlanIdentState,
                      hpVlanIdentType,
                      hpVlanIdentConfigStatus,
                      hpVlanMemberTagged2 }
        STATUS      deprecated
        DESCRIPTION "A collection of objects for managing tagged VLANs."
        ::= { hpVlanGroups 4 }

END