Skip to content

Latest commit

 

History

History
1051 lines (904 loc) · 45.1 KB

NEWS.rst

File metadata and controls

1051 lines (904 loc) · 45.1 KB
Raw

  • LADI jack2 2.23.2 (2024-MM-DD)

    • Upgrade waf to 2.1.2

  • LADI jack2 2.23.1 (2023-12-20)

    • Upgrade waf to 2.0.26 xcode support was dropped.
    • Proper handling of supplied flags (WafToolchainFlags) Downstream packager supplied flags are now handled correctly.
    • Relicense control.h more cleanly freely (for where it applies) (JackControlAPI.h and control.h) to ( GPL-2.0-or-later OR LGPL-2.1-or-later OR MIT OR AFL-2.1 )
    • Improved MIDI port aliases ALSA raw and seq MIDI ports are now created with aliases naming scheme matching the one of alsa_pcm. In particular, ALSA symbolic string ID is used instead of the less stable card index which can change from boot to boot.
    • JackControlAPI: Replace sigwait with signalfd and poll
    • JackControlAPI: Jack threads to notify failure to jackd by posting an event
    • Update the public version of control.h (Expose parameter constraints in control API and more)
    • Remove jackd+systemd scenario stuff. jackd is not supported in LADI project.
    • Load drivers from JACK_DRIVER_DIR
    • Load internal clients from JACK_INTERNAL_DIR
    • Deprecate ADDON_DIR
    • JackDriverLoader: Load .so suffixed drivers Loading of drivers with non-standard extensions like mydriver.something is not allowed anymore. Such drivers are ignored.
    • Remove jack_port_tie() and jack_port_untie() from libjack.so Undeprecate them in libjackserver.so
    • Use .so version of 0.2.23 (jack-major=2, jack-minor=23)
    • Use doxygen-awesome-css theme for docs
    • Improved doxygen docs (Adopt mainpage.dox and transport.dox from JACK1)
    • libjackserver.so: Add jackctl_subgraph_XXX() functions (not usable yet)
    • libjackserver.so: Remove internal client session management API
    • libjackserver.so: Define metadata APIs on libjackserver too (by falktx)
    • The string returned by jack_get_version_string() now contains libjackserver.so.0 mtime
    • Make jack_get_descriptor internal client message a verbose log
    • Fix deadlock with pthread_cond_timedwait() (by Florian Walpen)

  • LADI jack2 2.22.1 (2023-02-18)

    • Bring back the GIT_VERSION define
    • jack_get_version_string() now reports GIT_VERSION
    • Change default of self-connect-mode to 'e'

  • LADI jack2 2.22.0 (2023-02-02)

    Sync LADI jack2 codebase with jackaudio.org jack-1.9 codebase

This modification is based on jackaudio.org jack2 version 1.9.22. List of differences:

  • jackdbus is removed, to be built from https://github.com/LADI/jackdbus
  • jack server autostart default is now None
  • jackd build is disabled by default
  • libjackserver.so pkg-config info is now also provided via dedicated file

The fix for ringbuffer on arm jackaudio/jack2#886 is now the jack-1.9 variant

  • 1.9.22 (2023-02-02)
    • The waf autooption --example-tools has been removed. The example clients and tools are no longer part of the jack2 project.
    • Drop dependencies that were only used for example clients and tools (readline, sndfile and zita libs)
    • Fix build with python3.11+
    • Fix compatibility with macOS 12+
    • Fix ringbuffer thread safety on ARM
  • LADI jack2 2.21.0 (2022-08-27)

Initial release of LADI jack2 without jackdbus.

LADI jackdbus was initially modification of jack1.

Later, jackdbus reincarnated as modification of jackdmp by Stephane Letz in form of jack2 version 1.9.0, along with a new C level control API provided via libjackserver.

jackdbus was maintained by its author as part of jackaudio's jack2 project until 2022-08. As of this release, jackdbus is not part of jack2 codebase anymore, at least as far as LADI project is concerned.

Instead, this new LADI modification of jackaudio.org jack2 codebase, is providing jack2 without jackdbus.

This modification is based on jackaudio.org jack2 version 1.9.21. List of differences:

  • jackdbus is removed, to be built from https://github.com/LADI/jackdbus
  • jack server autostart default is now None
  • jackd build is disabled by default
  • fix for ringbuffer on arm jackaudio/jack2#886
  • libjackserver.so pkg-config info is now also provided via dedicated file

  • 1.9.21 (2022-04-15) * Add shell mode to jack_control (executes commands from stdin until EOF) * The waf autooption --example-tools introduced in 1.9.20 is now off by default,

    To get the previous behavior back pass --example-tools during build. This flag (and the related tools and their code) are going to be removed in the next release.

    • Fix alignas() on non-packed architectures
    • Fix build of jack-example-tools man pages (1.9.20 regression)
    • Fix compatibility with macOS 12
    • Fix missing symbols from jack client library (error and info callback pointers)
    • Fix potential memory corruption in midi_latency_test tool
    • Fix JackWeakAPI on Windows
    • Use predefined variables in pkg-config file (required for mingw)
External changes, related to macOS/Windows installer:
  • Fix application style in QJackCtl (qwindowsvistastyle.dll was missing)
  • Update QjackCtl used in macOS/Windows installers to 0.9.7
  • 1.9.20 (2022-01-15)
    • Add waf autooption --example-tools to allow optional build of executables, libraries and man pages provided by jack-example-tools (the files are built by default). Building and installing the additional files can be disabled by using --example-tools=no or --no-example-tools.
    • Fix 32-bit support in ALSA driver
    • Fix incomplete ASIO support on Windows
    • Fix metadata usage with multiple users
    • Fix netsource tool missing on Windows
    • Fix semaphore usage on macOS
    • Official FreeBSD support
External changes, related to macOS/Windows installer:
  • Update Qt5 used in macOS/Windows installers to 5.12.12
  • Update QjackCtl used in macOS/Windows installers to 0.9.6
  • 1.9.19 (2021-07-15)
    • Add jack_position_t::tick_double, and flags around it
    • Add zalsa "-w" argument to wait for soundcard to be available
    • Bump internal protocol version to 9 (due to struct alignment)
    • Fix alignment of fields for atomic accesses
    • Fix build for platforms needing __STDC_FORMAT_MACROS
    • Fix compilation of documentation
  • 1.9.18 (2021-04-15)
    • Add zalsa_in/out as internal client (based on zita-a2j/j2a and jack1 code)
    • Fix jack_midi_dump deadlock on close after the jack server is restarted
    • Fix interrupt signal for linux futex waits
    • Fix usage of meta-data in official macOS builds (private DB errors)
    • Log error message when cleaning previous DB (macOS and Windows)
  • 1.9.17 (2021-01-15)
    • Fix jack_control stopping after first command iteration
    • Fix library compat/current version under macOS
    • Fix return codes of jackd on success
    • Ignore DB_VERSION_MISMATCH error on windows, it is expected
    • Remove old workaround for asio4all, as it breaks with jack-router
External changes, related to macOS/Windows installer:
  • Add jack-router to Windows installer, opt-in
  • Fix registry keys for Windows, add 32bit compat ones on 64bit
  • Support for arm64 macOS builds
  • Show welcome and license pages on windows installer
  • Update QjackCtl used in macOS/Windows installers to v0.9.0, with some commits cherry-picked from develop branch
  • 1.9.16 (2020-10-16)
    • Fix/revert a change in how meta-data definitions were exposed (regression in 1.9.15)
    • Remove jack-router Windows code from the repository
  • 1.9.15 (2020-10-15)
    • Automated builds for macOS and Windows (see jackaudio/jack2-releases repository)
    • Adapt wscript Windows build configuration to match old v1.9.11 installer
    • Bump maximum default number of clients and ports (now 256 clients and 2048 ports)
    • Delete various macOS and Windows-related files from the source code (no longer relevant)
    • Mark JACK-Session as deprecated, please use NSM instead
    • Remove unnecessary GPL include from LGPL code
    • Split example-clients and tools, as done in JACK1 many years ago (WIP)
    • Write Windows registry key during installation, so 3rd parties can find jackd.exe (as HKLM\Software\JACK\Location)
    • jack_control: Fix handling of dbus bytes
    • jack_control: Return a proper exit status on DBus exception
    • jack_property: Fix possible crash with "-l" argument usage
    • jack_wait: Add client name option -n/--name
    • Fix compilation of documentation
    • Fix compilation of mixed mode with meta-data enabled
    • Fix compilation with mingw
    • Fix client-side crash if initial meta-data DB setup fails
    • Fix macOS semaphore usage, so it works again
    • Several fixes for Windows (with contributions from Kjetil S. Matheussen)
    • Several minor fixes and grammar corrections (with contributions from Adam Miartus and Timo Wischer)
  • 1.9.14 (2019-10-28)
    • Fix ARM build
    • Fix mixed mode build when meta-data is enabled
    • Fix blocking DBus device reservation, so it plays nice with others (like PipeWire)
    • Use python3 for the waf build scripts
  • 1.9.13 (2019-10-06)
    • Meta-data API implementation. (and a few tools updated with support for it)
    • Correct GPL licence to LGPL for files needed to build libjack.
    • Remove FreeBoB backend (superseded by FFADO).
    • define JACK_LIB_EXPORT, useful for internal clients.
    • Mark jack_midi_reset_buffer as deprecated.
    • Add example systemd unit file
    • Signal to systemd when jackd is ready.
    • Set "seq" alsa midi driver to maximum resolution possible.
    • Fix loading internal clients from another internal client.
    • Code cleanup and various fixes. (too many to mention here, see git log for details)
  • 1.9.12 (2017-12-13)
    • Fix Windows build issues.
    • Fix build with gcc-7.
    • Show hint when DBus device reservation fails.
    • Add support for internal session files.
  • 1.9.11-RC1 (2017-06-13)
    • Various corrections in NetJack2 code. Partial buffers can now be transmitted with libjacknet API.
    • Including S24_LE/BE formats to linux ALSA driver.
    • More robust shared memory allocator.
    • Allow autostart of jackd on OSX where device-names can contain spaces.
    • Correct CoreAudio devices aggregation code.
    • Waf and wscripts improvement and update.
    • More flexible RT priority setup on Windows.
    • New JackProxyDriver.
    • Various fixes in JACK MIDI code.
    • Fix return value of SetTimebaseCallback().
    • Correct netmanager latency reporting.
    • Implement new jack_port_rename and JackPortRenameCallback API.
    • For OSX El Capitan support, use of Posix semaphore and move of Frameworks in /Library folder.
    • Fix CPU hogging of the midi_thread().
    • Release audio devices when alsa_driver_new fails.
    • String management fix.
    • Correct JackDriver::Open: call to fGraphManager->SetBufferSize has to use current fEngineControl->fBufferSize value.
    • Use ARM neon intrinsics for AudioBufferMixdown.
    • Fix Netjack alignment.
    • Various wscript improvements and cleanup.
    • Fix initialization of several class variables.
    • Heap-allocate client matrix in topo sort.
    • Add a toggle command to transport utility, to allow toggling between play and stop state.
    • Avoid side effects from parsing of "version" option in jackd.
    • Allow firewire device be selected via -d.
    • Add ARM-NEON acceleration for all non-dithering sample conversion functions.
    • Add jack_simdtest utility.
    • Use Linux futex as JackSynchro.
    • Add autoclose option to jack_load.
  • 1.9.10 (2014-07-19)
    • More robust code in JackPortAudioDriver to handle buffer size change and backend switching.
    • Fix bus error on ARM platforms.
    • Dynamically scan and print backend and internal names in jackd.
    • CoreMIDI driver fixes.
    • Rework NetJack2 code (OPUS codec on OSX, latency management, libjacknet code).
    • Correct auto-connect for audioadapter.
    • Add IIO driver.
    • Merge of Nedko no-self-connect branch.
    • Fix freewheel mode.
    • JackServer::SwitchMaster now correctly notify buffer_size and sample_rate changes, cleanup/improvements in JackNetDriver.
    • Tim Mayberry : Add support for building with mingw compiler.
    • Merge of Kim Jeong Yeon Android branch.
    • Partial port of metadata API.
  • 1.9.9.5 (2012-11-26)
    • Adrian Knoth fix in midiseq.c.
    • Fix library symbols export issue.
    • Cleanup drivers and internals loading code.
    • jackctl_driver_params_parse API moved in public control.h.
    • More general drivers/internals loading model on Windows.
    • Factorize code the server/client request in JackRequestDecoder class.
    • More robust server/client protocol.
    • Implement shutdown for in server clients.
    • Better time-out management in NetJack2.
    • Experimental system port alias use in Windows JackRouter.
    • Improve ShutDown in NetManager.
    • Correct ShutDown in JackInternalClient and JackLibClient.
    • Fix NetJack2 initialisation bug.
    • Add EndTime function (especially for Windows).
    • Rename JackProcessSync in JackPosixProcessSync.
    • A bit more robust JackMessageBuffer implementation (in progress).
    • Check server API callback from notification thread.
    • Use a time-out in notification channel write function.
    • Fix lock management in JackEngine.
    • In control API, UNIX like sigset_t replaced by more abstract jackctl_sigmask_t * opaque struct.
    • Improve libjacknet master mode.
    • Remove JACK_32_64 flag, so POST_PACKED_STRUCTURE now always used. POST_PACKED_STRUCTURE used for jack_latency_range_t type.
    • Rework JackMessageBuffer. [firewire]
    • Introduce UpdateLatencies() in FFADO backend. [firewire]
    • Allow FFADO backend to change the buffer size.
    • Update waf.
    • New jack_get_cycle_times() implementation from Fons Adriennsen.
    • Align buffers to 32 byte boundaries to allow AVX processing.
    • Extend jack_control to have parameter reset commands.
    • Fix alsa driver parameter order.
    • Control API: Enforce driver/internal parameter order.
    • Fix in ALSA adapter.
    • Devin Anderson patch for Jack/CoreMIDI duplicated messages.
    • Change framework installation hierarchy for OSX Mountain Lion.
    • Update JackCoreAudioDriver and JackCoreAudioAdapter with more recent API.
    • jack_control: fix epr command.
    • Add opus support to NetJack2.
    • More robust channel mapping handling in JackCoreAudioDriver.
    • netjack1/netone opus support.
    • controlapi: fix double free on master switch.
    • Use string ids in the alsa device list.
    • netjack/opus: don't re-init en/decoders.
    • Correct JackPortAudioDriver::Open: special case for ASIO drivers.
  • 1.9.8 (2011-12-19)
    • Merge newer-midi branch (Devin Anderson redesign of the MIDI drivers: alsarawmidi, ffado, coremidi and winmme).
    • Correction in jackdmp.cpp: notify_server_stop should be done after server destruction.
    • Correct driver lifetime management.
    • Add XRun detection in PortAudio driver.
    • CELT code for NetJack2.
    • Merge branch switch-master-port-registration-notifications: correct driver port registration.
    • Libjacknet in progress.
    • Correct MIDI in NetJack2.
    • Correct OSX real-time thread setup.
    • Correct rd_acquire in dbus code.
    • Correct NetJack2 connection handling.
    • SaveConnections/RestoreConnections in NetDriver and JackAudioDriver.
    • Special version of jack_attach_shm/jack_release_shm on client side for POSIX shared memory, to solve a memory leak issue.
    • Another round of code improvements to handle completely buggy Digidesign CoreAudio user-land driver.
    • Special CATCH_CLOSE_EXCEPTION_RETURN to handle Close API calls.
    • Add JACK_NETJACK_PORT and JACK_NETJACK_MULTICAST environment variables for NetJack2. NetJack2 now only send data on network only is ports are connected both sides.
    • Fix for "starting two instances of same app in parallel does not work" bug.
    • Enable explicit channel mapping in CoreAudio driver.
    • New JackTimedDriver class to be used by JackDummyDriver, JackNetDriver and JackNetOneDriver classes.
    • More robust code in synchronization primitives and in JackMessageBuffer.
    • More robust Control API implementation. Add jackctl_driver_get_type in Control API.
    • Singleton behaviour for JackCoreMidiDriver and JackWinMMEDriver.
    • John Emmas patch for DSP CPU computation.
    • John Emmas Windows server launching patch.
    • Fix jack_set_port_name API.
    • Enable local access in NetJack2 code.
    • Dynamic port management in JACK/CoreMidi bridge.
  • 1.9.7 (2011-03-30)
    • Sync JackAlsaDriver::alsa_driver_check_card_type with JACK1 backend.
    • Correct JackServer::Open to avoid a race when control API is used on OSX.
    • Improve backend error handling: fatal error returned by Read/Write now cause a Process failure (so a thread exit for blocking backends). Recoverable ones (XRuns..) are now treated internally in ALSA, FreeBob and FFADO backends.
    • In jackdmp.cpp, jackctl_setup_signals moved before jackctl_server_start.
    • Correct symbols export in backends on OSX. ALSA backend: suspend/resume handling.
    • Correct dummy driver.
    • Adrian Knoth jack_lsp patch.
    • Remove JackPortIsActive flag.
    • New latency API implementation.
    • ComputeTotalLatencies now a client/server call.
    • Add latent test client for latency API.
    • Also print playback and capture latency in jack_lsp. jack_client_has_session_callback implementation.
    • Check requested buffer size and limit to 1..8192 - avoids weird behaviour caused by jack_bufsize foobar.
    • jack_port_type_get_buffer_size implementation.
    • Stop using alloca and allocate buffer on the heap for alsa_io.
    • Rename jdelay to jack_iodelay as per Fons' request.
    • Call buffer size callback in activate (actually this is done on client side in the RT thread Init method).
    • Add jack_midi_dump client.
    • Synchronize net JACK1 with JACK1 version.
    • Synchronize jack_connect/jack_disconnect with JACK1 version.
    • Correct JackNetMaster::SetBufferSize.
    • Use jack_default_audio_sample_t instead of float consistently, fix ticket #201.
    • -X now allows to add several slave backends, add -I to load several internal clients.
    • Rework internal slave driver management, JackServerGlobals now handle same parameters as jackdmp.
    • Correct JackEngine::NotifyGraphReorder, update JackDebugClient with latest API.
    • Devin Anderson server-ctl-proposal branch merged on trunk: improved control API, slave backend reworked. Implement renaming in JackDriver::Open to avoid name collision (thanks Devin Anderson).
    • Correct alsa_driver_restart (thanks Devin Anderson). Correction of jack_connect/jack_disconnect: use of jack_activate and volatile keyword for thread shared variable.
    • Correction of JackNetOneDriver for latest CELT API.
    • Synchronize JackWeakAPI.cpp with new APIs.
  • 1.9.6 (2010-08-30)
    • Improve JackCoreAudioDriver and JackCoreAudioAdapter : when no devices are described, takes default input and output and aggregate them.
    • Correct JackGraphManager::DeactivatePort.
    • Correct JackMachServerChannel::Execute : keep running even in error cases. Raise JACK_PROTOCOL_VERSION number.
    • Arnold Krille firewire patch.
    • Raise JACK_DRIVER_PARAM_STRING_MAX and JACK_PARAM_STRING_MAX to 127 otherwise some audio drivers cannot be loaded on OSX.
    • Fix some file header to have library side code use LGPL.
    • On Windows, now use TRE library for regexp (BSD license instead of GPL license).
    • ffado-portname-sync.patch from ticket #163 applied.
    • Remove call to exit in library code.
    • Make jack_connect/jack_disconnect wait for effective port connection/disconnection.
    • Add tests to validate intclient.h API.
    • On Linux, inter-process synchronization primitive switched to POSIX semaphore.
    • In JackCoreAudioDriver, move code called in MeasureCallback to be called once in IO thread.
    • David Garcia Garzon netone patch.
    • Fix from Fernando Lopez-Lezcano for compilation on fc13.
    • Fix JackPosixSemaphore::TimedWait : same behavior as JackPosixSemaphore::Wait regarding EINTR.
    • David Garcia Garzon unused_pkt_buf_field_jack2 netone patch.
    • Arnold Krille firewire snooping patch.
    • Jan Engelhardt patch for get_cycles on SPARC.
    • Adrian Knoth hurd.patch, kfreebsd-fix.patch and alpha_ia64-sigsegv.patch from ticket 177.
    • Adrian Knoth fix for linux cycle.h (ticket 188).
    • In JackCoreAudioDriver, fix an issue when no value is given for input.
  • 1.9.5 (2010-02-12)
    • Dynamic choice of maximum port number.
    • More robust sample rate change handling code in JackCoreAudioDriver.
    • Devin Anderson patch for Jack FFADO driver issues with lost MIDI bytes between periods (and more).
    • Fix port_rename callback: now both old name and new name are given as parameters.
    • Special code in JackCoreAudio driver to handle completely buggy Digidesign CoreAudio user-land driver.
    • Ensure that client-side message buffer thread calls thread_init callback if/when it is set by the client (backport of JACK1 rev 3838).
    • Check dynamic port-max value.
    • Fix JackCoreMidiDriver::ReadProcAux when ring buffer is full (thanks Devin Anderson).
    • Josh Green ALSA driver capture only patch.
    • When threads are cancelled, the exception has to be rethrown.
    • Use a QUIT notification to properly quit the server channel, the server channel thread can then be 'stopped' instead of 'canceled'.
    • Mario Lang alsa_io time calculation overflow patch. Shared memory manager was calling abort in case of fatal error, now return an error in caller.
    • Change JackEngineProfiling and JackAudioAdapterInterface gnuplot scripts to output SVG instead of PDF.
  • 1.9.4 (2009-11-19)
    • Solaris boomer backend now working in capture or playback only mode.
    • Add a -G parameter in CoreAudio backend (the computation value in RT thread expressed as percent of period).
    • Use SNDCTL_DSP_SYNCGROUP/SNDCTL_DSP_SYNCSTART API to synchronize input and output in Solaris boomer backend.
    • Big endian bug fix in memops.c.
    • Fix issues in JackNetDriver::DecodeTransportData and JackNetDriver::Initialize.
    • Correct CPU timing in JackNetDriver, now take cycle begin time after Read.
    • Simplify transport in NetJack2: master only can control transport.
    • Change CoreAudio notification thread setup for OSX Snow Leopard.
    • Correct server temporary mode: now set a global and quit after server/client message handling is finished.
    • Add a string parameter to server ==> client notification, add a new JackInfoShutdownCallback type.
    • CoreAudio backend now issue a JackInfoShutdownCallback when an unrecoverable error is detected (sampling rate change, stream configuration change).
    • Correct jackdmp.cpp (failures case were not correct..).
    • Improve JackCoreAudioDriver code.
    • Raise default port number to 2048.
    • Correct JackProcessSync::LockedTimedWait.
    • Correct JACK_MESSAGE_SIZE value, particularly in OSX RPC code.
    • Now start server channel thread only when backend has been started (so in JackServer::Start).
    • Should solve race conditions at start time.
    • jack_verbose moved to JackGlobals class.
    • Improve aggregate device management in JackCoreAudioDriver: now a "private" device only and cleanup properly.
    • Aggregate device code added to JackCoreAudioAdapter.
    • Implement "hog mode" (exclusive access of the audio device) in JackCoreAudioDriver.
    • Fix jack_set_sample_rate_callback to have he same behavior as in JACK1.
    • Dynamic system version detection in JackCoreAudioDriver to either create public or private aggregate device.
    • In JackCoreAudioDriver, force the SR value to the wanted one before creating aggregate device (otherwise creation will fail).
    • In JackCoreAudioDriver, better cleanup of AD when intermediate open failure.
    • In JackCoreAudioDriver::Start, wait for the audio driver to effectively start (use the MeasureCallback).
    • In JackCoreAudioDriver, improve management of input/output channels: -1 is now used internally to indicate a wanted max value.
    • In JackCoreAudioDriver::OpenAUHAL, correct stream format setup and cleanup.
    • Correct crash bug in JackAudioAdapterInterface when not input is used in adapter (temporary fix).
    • Sync JackCoreAudioAdapter code on JackCoreAudioDriver one.
    • JACK_SCHED_POLICY switched to SCHED_FIFO.
    • Now can aggregate device that are themselves AD.
    • No reason to make jack_on_shutdown deprecated, so revert the incorrect change.
    • Thread AcquireRealTime and DropRealTime were (incorrectly) using fThread field.
    • Use pthread_self()) (or GetCurrentThread() on Windows) to get the calling thread.
    • Correctly save and restore RT mode state in freewheel mode.
    • Correct freewheel code on client side.
    • Fix AcquireRealTime and DropRealTime: now distinguish when called from another thread (AcquireRealTime/DropRealTime) and from the thread itself (AcquireSelfRealTime/DropSelfRealTime).
    • Correct JackPosixThread::StartImp: thread priority setting now done in the RT case only.
    • Correct JackGraphManager::GetBuffer for the "client loop with one connection" case: buffer must be copied.
    • Correct JackInfoShutdownCallback prototype, two new JackClientProcessFailure and JackClientZombie JackStatus code.
    • Correct JackCoreAudio driver when empty strings are given as -C, -P or -d parameter.
    • Better memory allocation error checking on client (library) side.
    • Better memory allocation error checking in ringbuffer.c, weak import improvements.
    • Memory allocation error checking for jack_client_new and jack_client_open (server and client side).
    • Memory allocation error checking in server for RPC.
    • Simplify server temporary mode: now use a JackTemporaryException.
    • Lock/Unlock shared memory segments (to test...).
    • Sync with JACK1 : -r parameter now used for no-realtime, realtime (-R) is now default, usable backend given vie platform.
    • In JackCoreAudio driver, (possibly) clock drift compensation when needed in aggregated devices.
    • In JackCoreAudio driver, clock drift compensation in aggregated devices working.
    • In JackCoreAudio driver, clock drift compensation semantic changed a bit: when on, does not activate if not needed (same clock domain).
    • Sync JackCoreAudioAdapter code with JackCoreAudioDriver.
  • 1.9.3 (2009-07-21)
    • New JackBoomerDriver class for Boomer driver on Solaris.
    • Add mixed 32/64 bits mode (off by default).
    • Native MIDI backend (JackCoreMidiDriver, JackWinMMEDriver).
    • In ALSA audio card reservation code, tries to open the card even if reservation fails.
    • Clock source setting on Linux.
    • Add jackctl_server_switch_master API.
    • Fix transport callback (timebase master, sync) issue when used after jack_activate (RT thread was not running).
    • D-Bus access for jackctl_server_add_slave/jackctl_server_remove_slave API.
    • Cleanup "loopback" stuff in server.
    • Torben Hohn fix for InitTime and GetMicroSeconds in JackWinTime.c.
    • New jack_free function added in jack.h.
    • Reworked Torben Hohn fix for server restart issue on Windows.
    • Correct jack_set_error_function, jack_set_info_function and jack_set_thread_creator functions.
    • Correct JackFifo::TimedWait for EINTR handling.
    • Move DBus based audio device reservation code in ALSA backend compilation.
    • Correct JackTransportEngine::MakeAllLocating, sync callback has to be called in this case also.
    • NetJack2 code: better error checkout, method renaming.
    • Tim Bechmann patch: hammerfall, only release monitor thread, if it has been created.
    • Tim Bechmann memops.c optimization patches.
    • In combined --dbus and --classic compilation code, use PulseAudio acquire/release code.
    • Big rewrite of Solaris boomer driver, seems to work in duplex mode at least.
    • Loopback backend reborn as a dynamically loadable separated backend.
  • 1.9.2 (2009-02-11)
    • Solaris version.
    • New "profiling" tools.
    • Rework the mutex/signal classes.
    • Support for BIG_ENDIAN machines in NetJack2.
    • D-BUS based device reservation to better coexist with PulseAudio on Linux.
    • Add auto_connect parameter in netmanager and netadapter.
    • Use Torben Hohn PI controler code for adapters.
    • Client incorrect re-naming fixed : now done at socket and fifo level.
    • Virtualize and allow overriding of thread creation function, to allow Wine support (from JACK1).
  • 1.9.1 (2008-11-14)
    • Fix jackctl_server_unload_internal.
    • Filter SIGPIPE to avoid having client get a SIGPIPE when trying to access a died server.
    • Libjack shutdown handler does not "deactivate" (fActive = false) the client anymore, so that jack_deactivate correctly does the job later on.
    • Better isolation of server and clients system resources to allow starting the server in several user account at the same time.
    • Report ringbuffer.c fixes from JACK1.
    • Client and library global context cleanup in case of incorrect shutdown handling (that is applications not correctly closing client after server has shutdown).
    • Use JACK_DRIVER_DIR variable in internal clients loader.
    • For ALSA driver, synchronize with latest JACK1 memops functions.
    • Synchronize JACK2 public headers with JACK1 ones.
    • Implement jack_client_real_time_priority and jack_client_max_real_time_priority API.
    • Use up to BUFFER_SIZE_MAX frames in midi ports, fix for ticket #117.
    • Cleanup server starting code for clients directly linked with libjackserver.so.
    • JackMessageBuffer was using thread "Stop" scheme in destructor, now use the safer thread "Kill" way.
    • Synchronize ALSA backend code with JACK1 one.
    • Set default mode to 'slow' in JackNetDriver and JackNetAdapter.
    • Simplify audio packet order verification.
    • Fix JackNetInterface::SetNetBufferSize for socket buffer size computation and JackNetMasterInterface::DataRecv if synch packet is received, various cleanup.
    • Better recovery of network overload situations, now "resynchronize" by skipping cycles.".
    • Support for BIG_ENDIAN machines in NetJack2.
    • Support for BIG_ENDIAN machines in NetJack2 for MIDI ports.
    • Support for "-h" option in internal clients to print the parameters.
    • In NetJack2, fix a bug when capture or playback only channels are used.
    • Add a JACK_INTERNAL_DIR environment variable to be used for internal clients.
    • Add a resample quality parameter in audioadapter.
    • Now correctly return an error if JackServer::SetBufferSize could not change the buffer size (and was just restoring the current one).
    • Use PRIu32 kind of macro in JackAlsaDriver again.
    • Add a resample quality parameter in netadapter.
  • 1.9.0 (2008-03-18)
    • Waf based build system: Nedko Arnaudov, Grame for preliminary OSX support.
    • Control API, dbus based server control access: Nedko Arnaudov, Grame.
    • NetJack2 components (in progress): jack_net backend, netmanager, audioadapter, netadapter : Romain Moret, Grame.
    • Code restructuring to help port on other architectures: Michael Voigt.
    • Code cleanup/optimization: Tim Blechmann.
    • Improve handling of server internal clients that can now be loaded/unloaded using the new server control API: Grame.
    • A lot of bug fix and improvements.
  • 0.72 (2008-04-10)
  • 0.71 (2008-02-14)
    • Add port register/unregister notification in JackAlsaDriver.
    • Correct JACK_port_unregister in MIDI backend.
    • Add TimeCallback in JackDebugClient class.
    • Correct jack_get_time propotype.
    • Correct JackSocketClientChannel::ClientClose to use ServerSyncCall instead of ServerAsyncCall.
    • Better documentation in jack.h. libjackdmp.so renamed to libjackservermp.so and same for OSX framework.
    • Define an internal jack_client_open_aux needed for library wrapper feature.
    • Remove unneeded jack_port_connect API.
    • Correct jack_port_get_connections function (should return NULL when no connections).
    • In thread model, execute a dummy cycle to be sure thread has the correct properties (ensure thread creation is finished).
    • Fix engine real-time notification (was broken since ??).
    • Implements wrapper layer.
    • Correct jack_port_get_total_latency.
    • Correct all backend playback port latency in case of "asynchronous" mode (1 buffer more).
    • Add test for jack_cycle_wait, jack_cycle_wait and jack_set_process_thread API.
    • RT scheduling for OSX thread (when used in dummy driver).
    • Add -L (extra output latency in aynchronous mode) in CoreAudio driver.
    • New JackLockedEngine decorator class to serialize access from ALSA Midi thread, command thread and in-server clients.
    • Use engine in JackAlsaDriver::port_register and JackAlsaDriver::port_unregister.
    • Fix connect notification to deliver one notification only.
    • Correct JackClient::Activate so that first kGraphOrderCallback can be received by the client notification thread.
    • New jack_server_control client to test notifications when linked to the server library.
    • Synchronise transport.h with latest jackd version (Video handling).
    • Transport timebase fix.
    • Dmitry Baikov patch for alsa_rawmidi driver.
    • Pieter Palmers patch for FFADO driver.
    • Add an Init method for blocking drivers to be decorated using JackThreadedDriver class.
    • Correct PortRegister, port name checking must be done on server side.
    • Correct a missing parameter in the usage message of jack_midiseq.
    • New SetNonBlocking method for JackSocket.
    • Correct a dirty port array issue in JackGraphManager::GetPortsAux.
  • 0.70 (2008-01-24)
    • Updated API to match jack 0.109.0 version.
    • Update in usx2y.c and JackPort.cpp to match jackd 0.109.2.
    • Latest jack_lsp code from jack SVN.
    • Add jack_mp_thread_wait client example.
    • Add jack_thread_wait client example.
    • Remove checking thread in CoreAudio driver, better device state change recovery strategy: the driver is stopped and restarted.
    • Move transport related methods from JackEngine to JackServer.
    • Tim Blechmann sse optimization patch for JackaudioPort::MixAudioBuffer, use of Apple Accelerate framework on OSX.
    • Remove use of assert in JackFifo, JackMachSemaphore, and JackPosixSemaphore: print an error instead.
    • Correct "server_connect": close the communication channel.
    • More robust external API.
    • Use SetAlias for port naming.
    • Use jackd midi port naming scheme.
    • Notify ports unregistration in JackEngine::ClientCloseAux.
    • Fix in JackClient::Error(): when RT thread is failing and calling Shutdown, Shutdown was not desactivating the client correctly.
  • 0.69
    • On OSX, use CFNotificationCenterPostNotificationWithOptions with kCFNotificationDeliverImmediately | kCFNotificationPostToAllSessions for server ==> JackRouter plugin notification.
    • On OSX, use jack server name in notification system.
    • Correct fPeriodUsecs computation in JackAudioDriver::SetBufferSize and JackAudioDriver::SetSampleRate.
    • Correct JackMachNotifyChannel::ClientNotify.
    • Correct bug in CoreAudio driver sample rate management.
    • Add a sample_rate change listener in CoreAudio driver.
    • Correct sample_rate management in JackCoreAudioDriver::Open.
    • Better handling in sample_rate change listener.
    • Pieter Palmers FFADO driver and scons based build.
    • Pieter Palmers second new build system: scons and Makefile based build.
    • Tim Blechmann scons patch.
    • Change string management for proper compilation with gcc 4.2.2.
    • JackLog cleanup.
    • Cleanup in CoreAudio driver.
    • Tim Blechmann patch for JackGraphManager::GetPortsAux memory leak, Tim Blechmann patch for scons install.
    • Dmitry Baikov MIDI patch: alsa_seqmidi and alsa_rammidi drivers.
    • CoreAudio driver improvement: detect and notify abnormal situations (stopped driver in case of SR change...).
  • 0.68 (2007-10-16)
    • Internal loadable client implementation, winpipe version added.
    • Reorganize jack headers.
    • Improve Linux install/remove scripts.
    • Use LIB_DIR variable for 64 bits related compilation (drivers location).
    • More generic Linux script.
    • Correct jack_acquire_real_time_scheduling on OSX.
    • Merge of Dmitry Baikov MIDI branch.
    • Correct JackGraphManager::GetPortsAux to use port type.
    • Remove JackEngineTiming class: code moved in JackEngineControl.
    • Add midiseq and midisine examples.
    • Cleanup old zombification code.
    • Linux Makefile now install jack headers.
    • Use of JACK_CLIENT_DEBUG environment variable to activate debug client mode.
    • Definition of JACK_LOCATION variable using -D in the Makefile.
    • Restore jack 0.103.0 MIDI API version.
    • Fix a bug in freewheel management in async mode: drivers now receive the kStartFreewheelCallback and kStopFreewheelCallback notifications.
    • Server and user directory related code moved in a JackTools file.
    • Client name rewriting to remove path characters (used in fifo naming).
    • Correct ALSA driver Attach method: internal driver may have changed the buffer_size and sample_rate values.
    • Add JackWinSemaphore class.
    • Add an implementation for obsolete jack_internal_client_new and jack_internal_client_close.
    • Add missing jack_port_type_size.
    • Use of JackWinSemaphore instead of JackWinEvent for inter-process synchronization.
    • Correct types.h for use with MINGW on Windows.
    • Move OSX start/stop notification mechanism in Jackdmp.cpp.
    • Correct CheckPort in JackAPI.cpp.
  • 0.67 (2007-09-28)
    • Correct jack_client_open "status" management.
    • Rename server_name from "default" to "jackdmp_default" to avoid conflict with regular jackd server.
    • Fix a resource leak issue in JackCoreAudioDriver::Close().
    • Better implement "jack_client_open" when linking a client with the server library.
    • Correct "jack_register_server" in shm.c.
    • Add missing timestamps.c and timestamps.h files.
    • Correctly export public headers in OSX frameworks.
    • Suppress JackEngine::ClientInternalCloseIm method.
    • Use .jackdrc file (instead of .jackdmprc).
    • Install script now creates a link "jackd ==> jackdmp" so that automatic launch can work correctly.
    • Paul Davis patch for -r (--replace-registry) feature.
    • Internal loadable client implementation.
    • Fix JackEngine::Close() method.
    • Windows JackRouter.dll version 0.17: 32 integer sample format.
  • 0.66 (2007-09-06)
    • Internal cleanup.
    • Windows JackRouter.dll version 0.16: use of "jack_client_open" API to allow automatic client renaming, better Windows VISTA support, new JackRouter.ini file.
  • 0.65 (2007-08-30)
    • Fix backend port alias management (renaming in system:xxx).
    • Fix a bug in JackLibClient::Open introduced when adding automatic client renaming.
    • Fix a bug in jack_test.
    • Correct JackShmMem destructor.
    • Correct end case in JackClient::Execute.
    • Correct JackMachSemaphore::Disconnect.
    • Implement server temporary (-T) mode.
    • Make "Rename" a method of JackPort class, call it from driver Attach method.
    • Server/library protocol checking implementation.
  • 0.64 (2007-07-26)
    • Checking in the server to avoid calling the clients if no callback are registered.
    • Correct deprecated jack_set_sample_rate_callback to return 0 instead of -1.
    • Dmitry Baikov buffer size patch.
    • Correct notification for kActivateClient event. Correct JackEngine::ClientCloseAux (when called from JackEngine::ClientExternalOpen).
    • Correct JackWinEvent::Allocate.
    • Automatic client renaming.
    • Add "systemic" latencies management in CoreAudio driver.
    • Automatic server launch.
    • Removes unneeded 'volatile' for JackTransportEngine::fWriteCounter.
  • 0.63 (2007-04-05)
    • Correct back JackAlsaDriver::Read method.
    • Dmitry Baikov patch for JackGraphManager.cpp. Merge JackGraphManager Remove and Release method in a unique Release method.
    • Dmitry Baikov jackmp-time patch : add jack_get_time, jack_time_to_frames, jack_frames_to_time. Add missing -D__SMP__in OSX project. Add new jack_port_set_alias, jack_port_unset_alias and jack_port_get_aliases API.
    • Steven Chamberlain patch to fix jack_port_by_id export.
    • Steven Chamberlain patch to fix jack_port_type. Test for jack_port_type behaviour in jack_test.cpp tool. Add jack_set_client_registration_callback API. Add "callback exiting" and "jack_frame_time" tests in jack_test.
  • 0.62 (2007-02-16)
    • More client debug code: check if the client is still valid in every JackDebugClient method, check if the library context is still valid in every API call.
    • Uses a time out value of 10 sec in freewheel mode (like jack).
    • More robust activation/deactivation code, especially in case of client crash.
    • New LockAllMemory and UnlockAllMemory functions.
    • Use pthread_attr_setstacksize in JackPosixThread class.
    • Add Pieter Palmers FreeBob driver.
    • Thibault LeMeur ALSA driver patch.
    • Thom Johansen fix for port buffer alignment issues.
    • Better error checking in PortAudio driver.
  • 0.61 (2006-12-18)
    • Tom Szilagyi memory leak fix in ringbuffer.c.
    • Move client refnum management in JackEngine.
    • Shared_ports renamed to shared_graph.
    • Add call to the init callback (set up using the jack_set_thread_init_callback API) in Real-Time and Notification threads.
    • Define a new 'kActivateClient' notification.
    • New server/client data transfer model to fix a 64 bits system bug.
    • Fix a device name reversal bug in ALSA driver.
    • Implement thread.h API.
  • 0.60 (2006-11-23)
    • Improve audio driver synchronous code to better handle possible time-out cases.
    • Correct JackWinEnvent::Allocate (handle the ERROR_ALREADY_EXISTS case).
    • Correct JackEngine::ClientExternalNew.
  • 0.59 (2006-09-22)
    • Various fixes in Windows version.
    • Signal handling in the Windows server.
    • Improved JackRouter ASIO/Jack bridge on Windows.
    • Rename global "verbose" in "jack_verbose" to avoid symbol clash with PureData.
    • Add a new cpu testing/loading client.
    • Correct server SetBufferSize in case of failure.
    • Correct PortAudio driver help.
    • Use -D to setup ADDON_DIR on OSX and Linux.
    • Synchronize ALSA backend with jack one.
  • 0.58 (2006-09-06)
    • Correct a bug introduced in 0.55 version that was preventing coreaudio audio inputs to work.
    • Restructured code structure after import on svn.
  • 0.57
    • Correct bug in Mutex code in JackClientPipeThread::HandleRequest.
    • ASIO JackRouter driver supports more applications.
    • Updated HTML documentation.
    • Windows dll binaries are compiled in "release" mode.
  • 0.56
    • Correct SetBufferSize in coreaudio driver, portaudio driver and JackServer.
    • Real-time notifications for Windows version.
    • In the PortAudio backend, display more informations for installed WinMME,
    • DirectSound and ASIO drivers.
  • 0.55
    • Windows version.
    • Correct management of monitor ports in ALSA driver.
    • Engine code cleanup.
    • Apply Rui patch for more consistent parameter naming in coreaudio driver.
    • Correct JackProcessSync::TimedWait: time-out was not computed correctly.
    • Check the return code of NotifyAddClient in JackEngine.
  • 0.54
    • Use the latest shm implementation that solve the uncleaned shm segment problem on OSX.
    • Close still opened file descriptors (report from Giso Grimm). Updated html documentation.
  • 0.53
    • Correct JackPilotMP tool on OSX.
    • Correct CoreAudio driver for half duplex cases.
    • Fix a bug in transport for "unactivated" clients.
    • Fix a bug when removing "unactivated" clients from the server. Tested on Linux/PPC.
  • 0.52
    • Universal version for Mac Intel and PPC.
    • Improvement of CoreAudio driver for half duplex cases.
  • 0.51
    • Correct bugs in transport API implementation.
  • 0.50
    • Transport API implementation.
  • 0.49
    • Internal connection manager code cleanup.
  • 0.48
    • Finish software monitoring implementation for ALSA and CoreAudio drivers.
    • Simpler shared library management on OSX.
  • 0.47
    • More fix for 64 bits compilation.
    • Correct ALSA driver.
    • Create a specific folder for jackdmp drivers.
    • Use /dev/shm as default for fifo and sockets.
    • "Install" and "Remove" script for smoother use with regular jack.
  • 0.46
    • Fix a bug in loop management.
    • Fix a bug in driver loading/unloading code.
    • Internal code cleanup for better 64 bits architecture support.
    • Compilation on OSX/Intel.
    • Add the -d option for coreaudio driver (display CoreAudio devices internal name).
  • 0.45
    • Script to remove the OSX binary stuff.
    • Correct an export symbol issue that was preventing QjackCtl to work on OSX.
    • Fix the consequences of the asynchronous semantic of connections/disconnections.
  • 0.44
    • Patch from Dmitry Daikov: use clock_gettime by default for timing.
    • Correct dirty buffer issue in CoreAudio driver. Updated doc.
  • 0.43
    • Correct freewheel mode.
    • Optimize ALSA and coreaudio drivers.
    • Correct OSX installation script.
  • 0.42
    • Patch from Nick Mainsbridge.
    • Correct default mode for ALSA driver.
    • Correct XCode project.
  • 0.41
    • Add the ALSA MMAP_COMPLEX support for ALSA driver.
    • Patch from Dmitry Daikov: compilation option to choose between "get_cycles" and "gettimeofday" to measure timing.
  • 0.4
    • Linux version, code cleanup, new -L parameter to activate the loopback driver (see Documentation), a number of loopback ports can be defined. Client validation tool.
  • 0.31
    • Correct bug in mixing code that caused Ardour + jackdmp to crash...
  • 0.3
    • Implement client zombification + correct feedback loop management + code cleanup.
  • 0.2
    • Implements jack_time_frame, new -S (sync) mode: when "synch" mode is activated, the jackdmp server waits for the graph to be finished in the current cycle before writing the output buffers. Note: To experiment with the -S option, jackdmp must be launched in a console.
  • 0.1
    • First published version