Neptune 2 BL Touch Installtion:
DISCLAIMER: Firmware and Configuration Files were provided by Elegoo directly. We are NOT responsible for installation or configuration errors related to these files.
BL Touch Mount for Neptune 2 STL File:
Firmware / Config. Install Procedure:
- Determine which Firmware YOUR Printer needs. V1.0.3 Firmware is for the V1.2 Mainboard. V2.0.1 firmware is for the V1.3 Mainboard ONLY.
- Copy the contents of the Firmware Folder (V1.0.3 OR V2.0.1) to your SD Card for your printer.
- SD Card should now have these Folders/Files: "elegoo_font", "elegoo_pic", elegoo.bin, elegoo.txt
- Safely Eject SD Card from Computer.
- Insert SD Card into Printer and Power on the Printer (Do NOT Interupt this process.).
- That is it!
Detailed Installation Instructions:
- How-To YouTube Video: https://youtu.be/7jILw_2lRDw
- How-To Blog Post: https://www.hotrodhippie.com/post/bl-touch-install-on-elegoo-neptune-2-how-to
DISCLAIMER: We are NOT RESPONSIBLE for any damage or issues using this file or instructions may cause, USE AT YOUR OWN RISK!