How to use!

[indotronic]

hi dear,
this is no signal, or offline. whats wrong?

[McMCCRU]

I do not understand your question, and I do not possess telepathy.

[indotronic]

Do you have tutorial tvheadend using minsatIp?

[McMCCRU]

http://old-forum.alexelec.tv/viewtopic.php?f=22&t=5309&sid=e6e067ff225a3c5c2f6935b1c4dce35d&start=20#p28416

[McMCCRU]

That's all there is on this topic.

[indotronic]

That's all there is on this topic.

Ok bro, i have install tvheadend in ubuntu virtualbox. In the web config showing the minisatip. But, after scanning no have result. Can you detail step by step it.

[McMCCRU]

I gave you a link where everything is detailed and step by step. You don't say anything about your set-top box, what tuner chip is in it, did you correctly specify the frontend initialization setting?

[indotronic]

The chip using rda5815m.

And this is config

Where is wrong?

[McMCCRU]

I don't know where your problem is. But most likely your frontend is not initialized correctly.
This is the original version - |8:0:0xe4:55:0:0x18:&1:1:2:0:0:1
Your may be different
|8:0:0xe4:55:0:0x18:&1:0:2:0:0:1 - LNB supply switch in inversion
or
|8:0:0xe4:55:0:0x18:&1:1:2:0:1:1 - switching polarization in inversion
or both at once
|8:0:0xe4:55:0:0x18:&1:0:2:0:1:1
I only know these values, which can be different. Connect the tester and check the voltage at the antenna output so that it matches the desired polarization 13/18V

[indotronic]

hmm. yeah. i am first in dvb-s. i am change the value frontend still no snr. or position the parabola?

[indotronic]

`RUNPartition Version : 102
Partition Count : 5
Write Protect : FALSE
CRC32 Enable : TRUE
Table CRC32 : FFEFB865

ID NAME FS CRC32 START TOTAL_SIZE MAIN_SIZE USED_SIZE Use% RES_SIZE

0 BOOT RAW B12CFDD8 00000000 64 KB 64 KB 57276 B 87% 0 MB
1 TABLE RAW 00010000 64 KB 64 KB 0 MB 0% 0 MB
2 KERNEL RAW AD64B5CA 00020000 960 KB 960 KB 926499 B 94% 0 MB
3 ROOTFS CRAMFS FCB41EBC 00110000 2752 KB 2752 KB 2616 KB 95% 0 MB
4 DATA MINIFS FF000000 003c0000 256 KB 256 KB 1 B 0% 0 MB

GxLoader v1.9 20200317

cpu family : CSKY
chip model : gx6605s
board type : generic
memory size : 64 MB
Flash type : w25q32
Flash size : 4 MB
uImage_load_kernel.

Decompress kernel ...ok
The total boot time is: 1 s (1910 ms)
[ 0.000000] Linux version 2.6.27.55 (igor@igor-GL553VE) (gcc version 4.5.1 (C-SKY Tools V2.8.01-gx-sp9(UClibc), ABIV1, B20170724) ) #3 Sun May 24 19:40:53 MSK 2020
[ 0.000000] CPU revision is: 0x102816b2 (CK610MA)
[ 0.000000] Determined physical RAM map:
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 04000000 @ 10000000 (usable)
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00010000 -> 0x00014000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00010000 -> 0x00014000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16256
[ 0.000000] Kernel command line: mem=64M console=ttyS0,115200 init=/init chipid=0x6605 root=/dev/mtdblock3 mtdparts=m25p80:64k@0m(BOOT),64k@64k(TABLE),960k@128k(KERNEL),2752k@1088k(ROOTFS),256k@3840k(DATA)
[ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.010000] Memory: 62804k/65536k available (1539k kernel code, 2676k reserved, 485k data, 68k init, 0k highmem)
[ 0.010000] SLUB: Genslabs=12, HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.010000] Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
[ 0.240000] Mount-cache hash table entries: 512
[ 0.240000] net_namespace: 288 bytes
[ 0.240000] NET: Registered protocol family 16
[ 0.240000] GX3XXX: Initialising architecture
[ 0.240000] gx_chip_id: 0x6605
[ 0.260000] SCSI subsystem initialized
[ 0.260000] usbcore: registered new interface driver usbfs
[ 0.260000] usbcore: registered new interface driver hub
[ 0.260000] usbcore: registered new device driver usb
[ 0.290000] NET: Registered protocol family 2
[ 0.380000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.380000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.380000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.380000] TCP reno registered
[ 0.410000] NET: Registered protocol family 1
[ 0.410000] squashfs: version 3.4 (2008/08/26) Phillip Lougher
[ 0.410000] squashfs: LZMA suppport for slax.org by jro
[ 0.410000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.410000] io scheduler noop registered
[ 0.410000] io scheduler anticipatory registered
[ 0.410000] io scheduler deadline registered
[ 0.410000] io scheduler cfq registered (default)
[ 0.980000] Nationalchip IRR Driver
[ 0.980000] input: goxceed remote control as /class/input/input0
[ 1.010000] Nationalchip gpio Driver
[ 1.010000] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 1.020000] serial8250.0: ttyS0 at MMIO 0x403000 (irq = 15) is a 16550A
[ 1.020000] console [ttyS0] enabled
[ 1.040000] loop: module loaded
[ 1.050000] usbcore: registered new interface driver catc
[ 1.050000] catc: v2.8 CATC EL1210A NetMate USB Ethernet driver
[ 1.060000] usbcore: registered new interface driver kaweth
[ 1.060000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 1.070000] usbcore: registered new interface driver pegasus
[ 1.080000] rtl8150: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
[ 1.090000] usbcore: registered new interface driver rtl8150
[ 1.090000] usbcore: registered new interface driver r8152
[ 1.100000] usbcore: registered new interface driver asix
[ 1.110000] usbcore: registered new interface driver ax88179_178a
[ 1.110000] usbcore: registered new interface driver cdc_ether
[ 1.120000] usbcore: registered new interface driver dm9620
[ 1.120000] usbcore: registered new interface driver gl620a
[ 1.130000] usbcore: registered new interface driver net1080
[ 1.140000] usbcore: registered new interface driver plusb
[ 1.140000] usbcore: registered new interface driver rndis_host
[ 1.150000] usbcore: registered new interface driver cdc_subset
[ 1.160000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.160000] usbcore: registered new interface driver qf9700
[ 1.170000] SCSI Media Changer driver v0.25
[ 1.180000] m25p80 spi0.0: w25q32 (4096 Kbytes)
[ 1.190000] 6 cmdlinepart partitions found on MTD device m25p80
[ 1.190000] Creating 6 MTD partitions on "m25p80":
[ 1.200000] 0x00000000-0x00010000 : "BOOT"
[ 1.200000] 0x00010000-0x00020000 : "TABLE"
[ 1.210000] 0x00020000-0x00110000 : "KERNEL"
[ 1.220000] 0x00110000-0x003c0000 : "ROOTFS"
[ 1.230000] 0x003c0000-0x00400000 : "DATA"
[ 1.230000] 0x00010000-0x003c0000 : "UPDATE"
[ 1.240000] Initializing USB Mass Storage driver...
[ 1.250000] usbcore: registered new interface driver usb-storage
[ 1.250000] USB Mass Storage support registered.
[ 1.260000] usbcore: registered new interface driver usbserial
[ 1.260000] usbserial: USB Serial support registered for generic
[ 1.270000] usbcore: registered new interface driver usbserial_generic
[ 1.280000] usbserial: USB Serial Driver core
[ 1.280000] usbserial: USB Serial support registered for cp2101
[ 1.290000] usbcore: registered new interface driver cp2101
[ 1.290000] cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
[ 1.300000] usbserial: USB Serial support registered for debug
[ 1.310000] usbcore: registered new interface driver debug
[ 1.310000] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.320000] usbcore: registered new interface driver ftdi_sio
[ 1.330000] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 1.340000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.340000] usbcore: registered new interface driver option
[ 1.350000] option: USB Driver for GSM modems: v0.7.2
[ 1.350000] usbserial: USB Serial support registered for pl2303
[ 1.360000] usbcore: registered new interface driver pl2303
[ 1.370000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 1.370000] i2c /dev entries driver
[ 1.380000] nc watchdog init success.
[ 1.390000] TCP cubic registered
[ 1.390000] NET: Registered protocol family 17
[ 1.400000] VFS: Mounted root (squashfs filesystem) readonly.
[ 1.410000] Freeing unused kernel memory: 68k freed
[ 1.420000] Warning: unable to open an initial console.
[ 4.450000] minifs filesystem mount success!
[ 4.790000] hello, panel!
[ 5.040000] gxav_module_init: ok!
[ 5.590000] DVB: registering new adapter (gxdvb)
[ 5.590000] fe_profile.demod_type = 8
[ 5.590000] fe_profile.demod_i2c_id = 0
[ 5.600000] fe_profile.demod_chip_addr = 0xe4
[ 5.600000] fe_profile.tuner_type = 55
[ 5.610000] fe_profile.tuner_i2c_id = 0
[ 5.610000] fe_profile.tuner_chip_addr = 0x18
[ 5.610000]
[ 5.610000] DEMOD, tuner register
[ 5.640000] gx3211_init!!
[ 5.640000]
[ 5.640000] GX3211_GXDemod_Chanl_Rst
[ 5.660000]
[ 5.660000] DEMOD, GX3211_GXDemod_Init
[ 5.660000] gx_i2c_open_dev(),find active i2c device,i2c_devid=0
[ 5.670000] Read rda581x chip id 0x58 0xf8
[ 5.670000] DVB: registering frontend 0 (Nationalchip GX3211 DVB-C S2)...
[ 5.740000] hello, GPIO!
[ 5.850000] EHCI-NationalChip EHCI-NationalChip.0: EHCI-NationalChip
[ 5.880000] EHCI-NationalChip EHCI-NationalChip.0: new USB bus registered, assigned bus number 1
[ 5.910000] EHCI-NationalChip EHCI-NationalChip.0: irq 59, io mem 0x00900000
[ 5.930000] EHCI-NationalChip EHCI-NationalChip.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.960000] usb usb1: configuration #1 chosen from 1 choice
[ 6.000000] hub 1-0:1.0: USB hub found
[ 6.000000] hub 1-0:1.0: 2 ports detected
[ 6.630000] ohci_hcd_gx_drv_probe, a00000.
[ 6.630000] OHCI-NationalChip OHCI-NationalChip.0: OHCI-NationalChip
[ 6.660000] OHCI-NationalChip OHCI-NationalChip.0: new USB bus registered, assigned bus number 2
[ 6.660000] OHCI-NationalChip OHCI-NationalChip.0: irq 58, io mem 0x00a00000
[ 6.800000] usb usb2: configuration #1 chosen from 1 choice
[ 6.830000] hub 2-0:1.0: USB hub found
[ 6.830000] hub 2-0:1.0: 1 port detected
[ 7.000000] ohci_hcd_gx_drv_probe, b00000.
[ 7.000000] OHCI-NationalChip OHCI-NationalChip.1: OHCI-NationalChip
[ 7.030000] OHCI-NationalChip OHCI-NationalChip.1: new USB bus registered, assigned bus number 3
[ 7.030000] OHCI-NationalChip OHCI-NationalChip.1: irq 57, io mem 0x00b00000
[ 7.180000] usb usb3: configuration #1 chosen from 1 choice
[ 7.210000] hub 3-0:1.0: USB hub found
[ 7.210000] hub 3-0:1.0: 1 port detected
[ 7.610000] usb 3-1: new full speed USB device using OHCI-NationalChip and address 2
[ 7.650000] Monitor Driver, (c) 2013 Technologies
[ 7.880000] Init Internal TS interface for gx6605s.
[ 7.880000] Use Internal TS interface in force parallel mode!!!!
[ 7.890000] usb 3-1: configuration #1 chosen from 1 choice
[ 8.470000] eth0: register 'qf9700' at usb-OHCI-NationalChip-1, QF9700 USB Ethernet, 00:e0:4c:53:44:58
[ 9.420000] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 9.800000] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 10.890000] tune mode = 0
[ 10.890000]
[ 10.890000] GX3211_GXDemod_Chanl_Rst
[ 10.910000]
[ 10.910000] MODE SELECT---------------------
[ 10.910000]
[ 10.910000] GX3211_GX1132_Init_Chip
[ 11.020000] Init Internal TS interface for gx6605s.
[ 11.020000] Use Internal TS interface in force parallel mode!!!!
[ 11.290000] [rda581x_rda5815m_init:99] tuner init ok!
`
the LNB using LNBF KU Band :
Input Freq : 10.70 ~ 12.75GHz
Output Freq : 950 ~ 2150 MHz
L.O. Freq : 9.75/10.6GHz
N.F. : 0.3db

[indotronic]

before show 4 position, can you explain the config? or what happened?

[McMCCRU]

Why are you asking me this? I'm not the author of tvheadent!

[McMCCRU]

[McMCCRU]

These are the settings from scratch, in the wizard setup, I clicked "apply" all the time, selected only the DVB-S network and indicated in the network settings that everyone should connect - 0.0.0.0/0. After all these settings, I added a TP and all the rest flew in automatically, I didn’t touch anything else, everything was set up automatically. These are all my steps, do you understand that?

[indotronic]

Ok, i will solved the problem, inshaAllah, i think the position off disk to satellite not correctly

[indotronic]

Hi bro, i have questions aboit PIDS, can you tell whats the function?