Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Pixelbook 2017 downgrade touchpad firmware error despite #219

Open
gibwise opened this issue Aug 6, 2022 · 3 comments
Open

Pixelbook 2017 downgrade touchpad firmware error despite #219

gibwise opened this issue Aug 6, 2022 · 3 comments

Comments

@gibwise
Copy link

gibwise commented Aug 6, 2022

I have take off battery to disable the write protection. And I stll cannot downgrade the touchpad firmware.
sudo ./flashrom -p host -p ec:type=tp -i EC_RW -w -o rose_v1.1.8546-ee1861e9e.bin
flashrom v0.9.9 chromium.googlesource.com/chromiumos/third_party/flashrom : 75a34ae8 : May 19 2020 02:06:04 UTC on Linux 4.16.18-galliumos (x86_64)
flashrom v0.9.9 chromium.googlesource.com/chromiumos/third_party/flashrom : 75a34ae8 : May 19 2020 02:06:04 UTC on Linux 4.16.18-galliumos (x86_64)
Calibrating delay loop... OK.
coreboot table found at 0x7aa99000.
Found chipset "Intel Skylake". Enabling flash write... WARNING: SPI Configuration Lockdown activated.
OK.
Error: Programmer initialization failed.

flashrom v0.9.9 chromium.googlesource.com/chromiumos/third_party/flashrom : 75a34ae8 : May 19 2020 02:06:04 UTC on Linux 4.16.18-galliumos (x86_64)
flashrom was built with unknown PCI library, GCC 7.5.0, big endian
Command line (10 args): /tmp/flashrom -p host -p ec:type=tp -i EC_RW -w -o /tmp/flashrom.log rose_v1.1.8546-ee1861e9e.bin
Acquiring lock (timeout=180 sec)...
Opened file lock "/run/lock/firmware_utility_lock"
Lock acquired.
disable_power_management: Disabling power management.
Calibrating delay loop... OS timer resolution is 1 usecs, 3181M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 998 us, 10000 myus = 9981 us, 4 myus = 4 us, OK.
Initializing internal programmer
Found candidate at: 00000500-00000528
Found coreboot table at 0x00000500.
Found candidate at: 00000000-000004d0
Found coreboot table at 0x00000000.
coreboot table found at 0x7aa99000.
coreboot header(24) checksum: d914 table(1208) checksum: 905d entries: 40
Vendor ID: Google, part ID: Eve
Using External DMI decoder.
DMI string chassis-type: "Convertible"
DMI chassis-type is not specific enough.
DMI string system-manufacturer: "Google"
DMI string system-product-name: "Eve"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "Google"
DMI string baseboard-product-name: "Eve"
DMI string baseboard-version: "1.0"
get_target_bus_from_chipset() returns 0x10.
Found chipset "Intel Skylake" with PCI ID 8086:9d24. Enabling flash write...
BIOS_CNTL = 0x8b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled
SPI BAR is = 0xfe010000
GCS = 0x8b: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI)
SPIBAR = 0x00007f7702ffa000 + 0x0000
ich_ generation 16
0x04: 0x3f00f800 (HSFSC)
WARNING: SPI Configuration Lockdown activated.
0x08: 0x00bb1fc0 (FADDR)
0x50: 0x00004acb (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0xcb
0x54: 0x00000000 (FREG0: Flash Descriptor)
0x00000000-0x00000fff is read-only
0x58: 0x0fff0200 (FREG1: BIOS)
0x00200000-0x00ffffff is read-write
0x5C: 0x01ff0001 (FREG2: Management Engine)
0x00001000-0x001fffff is locked
0x60: 0x00007fff (FREG3: Gigabit Ethernet)
Gigabit Ethernet region is unused.
0x64: 0x00007fff (FREG4: Platform Data)
Platform Data region is unused.
0x68: 0x00007fff (FREG5: Device Expansion)
Device Expansion region is unused.
0x6C: 0x00007fff (FREG6: Reserved 1)
Reserved 1 region is unused.
0x70: 0x00007fff (FREG7: Reserved 2)
Reserved 2 region is unused.
0x74: 0x00007fff (FREG8: Embedded Controller)
Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
Embedded Controller region is unused.
0x84: 0x00000000 (PR0, unused)
0x88: 0x00000000 (PR1, unused)
0x8C: 0x00000000 (PR2, unused)
0x90: 0x00000000 (PR3, unused)
0x94: 0x00000000 (PR4, unused)
0x98: 0x00000000 (PR5, unused)
0x9C: 0x00000000 (PR6, unused)
0xA0: 0xfe000080 (PR7)
0x00080000-0x01e00fff is read-only
0xA4: 0xb32d5006 (PR8)
0x01006000-0x0132dfff is read-only
Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
=== Content Section ===
FLVALSIG 0x0ff0a55a
FLMAP0 0x00040003
FLMAP1 0x42100208
FLMAP2 0x00310330

--- Details ---
NR (Number of Regions): 1
FRBA (Flash Region Base Address): 0x040
NC (Number of Components): 1
FCBA (Flash Component Base Address): 0x030
ISL (ICH/PCH Strap Length): 66
FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100
NM (Number of Masters): 3
FMBA (Flash Master Base Address): 0x080
MSL/PSL (MCH/PROC Strap Length): 3
FMSBA (Flash MCH/PROC Strap Base Address): 0x300

=== Component Section ===
FLCOMP 0x125c00f5
FLILL 0xad604221

--- Details ---
Component 1 density: 16 MB
Component 2 is not used.
Read Clock Frequency: reserved
Read ID and Status Clock Freq.: reserved
Write and Erase Clock Freq.: reserved
Fast Read is supported.
Fast Read Clock Frequency: reserved
Invalid instruction 0: 0x21
Invalid instruction 1: 0x42
Invalid instruction 2: 0x60
Invalid instruction 3: 0xad

=== Region Section ===
FLREG0 0x00000000
FLREG1 0x0fff0200

--- Details ---
Region 0 (Descr.) 0x00000000 - 0x00000fff
Region 1 (BIOS ) 0x00200000 - 0x00ffffff

prettyprint_ich_descriptor_master: cs=16
=== Master Section ===
FLMSTR1 0x00a00b00
FLMSTR2 0x00c00d00
FLMSTR3 0x00800800
FLMSTR4 0x00000000
FLMSTR5 0x10010100

--- Details ---
Descr. BIOS ME GbE Plat EC
BIOS r rw rw
ME r rw rw
GbE rw
Plat
EC r rw

OK.
Target tp used
cros_ec_probe_dev: probing for CROS_EC at /dev/cros_tp
cros_ec_probe_lpc():518 ...
Target tp used
cros_ec_lpc only supports "ec" type devices.
mec1308 only supports "ec" type devices
mec1308_probe_spi_flash(): entered
mec1308 only supports "ec" type devices
ene_probe_spi_flash
ene_lpc only supports "ec" type devices
Error: Programmer initialization failed.
Restoring PCI config space for 00:1f:5 reg 0xdc
restore_power_management: Re-enabling power management.

@MrChromebox
Copy link
Owner

pushed a fix, LMK if it works since I can't test. Must be flashed from CrOS

@gibwise
Copy link
Author

gibwise commented Aug 25, 2022

pushed a fix, LMK if it works since I can't test. Must be flashed from CrOS

I didn`t backup original BIOS so I cannot go back to Chrome OS. Is it possible the touchpad firmware to flash using SuzzyQ cable?

@MrChromebox
Copy link
Owner

you can restore the stock firmware using my script, it will provide a firmware image for EVE.

You can almost certainly flash the TP firmware via a Suzy-Q cable, but I haven't done it and don't have any instructions on how to do it. I suspect there's something on chromium.org somewhere

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants