L4T R32.4.2 Notes

As of 30 Apr 2020, the master and dunfell-l4t-r32.4.2 branches support L4T R32.4.2/JetPack 4.4 Developer Preview content for Jetson TX1, Jetson TX2, Jetson Nano, and Jetson AGX Xavier. Experimental support for Jetson Xavier NX (eMMC module in Jetson Nano B01 carrier) is also present.

Notable changes from R32.3.1 / JetPack 4.3

U-Boot updated to v2020.04

NVIDIA has upstreamed all of their U-Boot changes, so the u-boot-tegra recipe is now based off the upstream U-Boot repository, instead of NVIDIA's. NVIDIA has not yet created a separate U-Boot configuration for the Nano eMMC (sku 0002) module, so patches have been added for it, as was done for R32.3.1.

CUDA 10.2

JetPack 4.4 DP updates CUDA to version 10.2, which is compatible with GCC 8. Recipes for building the GCC 8 toolchain have been added to the meta-tegra/contrib layer.

Fewer SDK Manager downloads required

With NVIDIA now providing direct package feeds for their L4T/JetPack OTA updates, recipes have been updated to use those feeds where possible. The host-side CUDA toolkit must still be downloaded using the SDK Manager, as before.

Other Notes

CUDA host tools

If you ran the SDK Manager on Ubuntu 16.04 to download the CUDA host-side tools, you should add the following setting to your build configuration:

CUDA_BINARIES_NATIVE = "cuda-binaries-ubuntu1604-native"

By default, the recipes assume you used Ubuntu 18.04 and reference that version of the CUDA host-side tools.