From a11ec14ffb0e908f2b2cac0ff34e4deba075f873 Mon Sep 17 00:00:00 2001 From: SJiB Date: Mon, 17 Jun 2024 18:17:45 +0200 Subject: [PATCH] Details to Hydraulic section --- en/qgep_swmm/QGEP-SWMM-Correspondances.rst | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/en/qgep_swmm/QGEP-SWMM-Correspondances.rst b/en/qgep_swmm/QGEP-SWMM-Correspondances.rst index 92000c685..da7f6adde 100644 --- a/en/qgep_swmm/QGEP-SWMM-Correspondances.rst +++ b/en/qgep_swmm/QGEP-SWMM-Correspondances.rst @@ -34,7 +34,9 @@ QGEP_SWMM creates one raingage for each subcatchment. By default: - Time serie: Each raingage is related to a default rain time serie called ``default_qgep_raingage_timeserie``. The time serie must be created and the value Series Name updated accordingly. -- Other parameters have default SWMM values +- Format is set to 'INTENSITY'. Format in which the rain data are supplied: INTENSITY: each rainfall value is an average rate in inches/hour (or mm/hour) over the recording interval. VOLUME: each rainfall value is the volume of rain that fell in the recording interval (in inches or millimeters). CUMULATIVE: each rainfall value represents the cumulative rainfall that has occurred since the start of the last series of non-zero values (in inches or millimeters). +- Interval is set to '0:15' (15 seconds). Recording time interval between gage readings in decimal hours or hours:minutes format. +- Other parameters have default SWMM values. If you want to use another Format or Interval, you have to adapt the view. See ``vw_swmm_raingages.sql`` for details.