Skip to content

Latest commit

 

History

History
136 lines (86 loc) · 4.09 KB

README.md

File metadata and controls

136 lines (86 loc) · 4.09 KB
Raw

Build Status

pscom

Suspending / Resuming

This fork extends ParaStation/pscom by support for suspending/resuming conncections including feedback via MQTT.

Inter-VM Shared Memory Communication

This fork also extends ParaStation/pscom by support for inter-vm shared memory communication over virtaul pci devices.

The new interconnect is implemented in the ivshmem plugin (lib/pscom4ivshmem). The following steps are based on the combination of libvirt 2.5.0 and qemu 2.6.0 - make sure to use adequate vms.

The vendor/ivshmem directory provides:

  • uio kernel module for ivshmem devices
  • udev rule for ivshmem device
  • sysconfig module to load uio-framework and the ivshmem driver at boottime
  • hotplug device file
  • hostserver process

VM Modifications

Compile the provided ivshmem uio driver and install it (to /lib/modules/[kernel version]/kernel/drivers/uio).

$ cd vendor/ivshmem/driver
$ make
$ sudo make install

Insert an appropriate udev .rules file into the /etc/udev/rules.d directory to give read and write access to the /dev/uioN device file. An example rule file is located in vendor/ivshmem/udev

$ sudo cp ./vendor/ivshmem/udev/ivshmem-uio-device.rules /etc/udev/rules.d/

In order to load the uio framework and the ivshmem driver at boot time, an appropriate sysconfig module under /etc/sysconfig/modules is necessary. An example module is locatd in vendor/ivshmem/sysconfig

$ sudo cp ./vendor/ivshmem/sysconfig/ivshmem-uio.modules /etc/sysconfig/modules/

Host Server Process

The current ivshmem plugin requires a server process that is executed directly on the underlaying host node.

The server can simply be build by:

$ cd ./vendor/ivshmem/server/
$ make all

The server is used as shown below:

$ ./ivshmem_server -s <host-shm-name> -m <size> -c migration-framework

with: -s = name of the shared memory segment on the host - it has to match the "shmem name" definded in the shmem device .xml file! -m = size of the shared memory segment in MB (has to be a multiple to the power of 2) -c = customization mode; use migration-framework

IVSHMEM Device

The syntax for ivshmem device definition is:

<shmem name='ivshmem0'>
    <model type='ivshmem-plain'/>
    <size unit='M'>512</size>
    <alias name='ivshmem0'/>
</shmem>

This .xml snippet can be added the the libvirt domain representation file vm-xy.xml ( $ virsh edit vm-xy) or it can be attached to the vm at runtime.

Note: The has to match the host shared memory region that the server process is using.

IVSHMEM Device Hot(un)plug

The ivshmem device can be hotpluged and -unpluged with libvirt 2.5.0 as follows:

$ virsh attach-device vm-xy /path/to/pscom/vendor/ivshmem/hotplug/device001.xml

$ virsh detach-device vm-xy /path/to/pscom/vendor/ivshmem/hotplug/device001.xml

Note: Migration is blocked while ivshmem devices are attached to a vm. Detach the device, migrate the vm and attach an ivshmem device again (if still required after migration)

Example Setup

To use two vms on one host with ivshmem support, simply do the following:

  • start the server process

    $ ./ivshmem-server -s ivshmem0 -m 512 - c migration-framework

  • start two virtual machines, eg. vm-x1 and vm-x2

    $ virsh start vm-x1
$ virsh start vm-x2

  • attach the device the the vms. Make sure the device name and size match the server arguments.

    $ virsh attach-device vm-x1 /path/2/pscom/vendor/ivshmem/hotplug/device1.xml
$ virsh attach-device vm-x2 /path/2/pscom/vendor/ivshmem/hotplug/device1.xml

  • optional check inside the vms:

    $ ll /dev/uio*

  • now the ivshmem plugin should work and pscom connections between co-located vms will be established via ivshmem.

Note: Start the serverprocess before booting the virtual machines! Otherweise qemu creates a host shared memory segment that can only be accessed with root rights.