Install success, but then can't find the IP

[yyaocsyy]

Hi,

Thanks for your all work for the great tools.
my HW config

MB: MSI H510i pro wifi with rtl8125b
CPU: i3-10105

I compiled apollolake-7.0.0-41890 img with lastest redpill-lkm and redpill-load then with the pocopico's
rp-ext
r8125 , acpid and early-telent

I can success install the 41890 on by PC by 8125B 2.5G , but after successful install, the machine can't auto reboot.
Then I force power down and then power up, I found that I can't get the IP. I can do nothing for the NAS.

But once when I formatting the SATA on other PC, I can find the IP again can install the NAS again.
But once I install completd then I can't find the IP again.

So it seems once I install the NAS success, then I can;t get the IP.
But I can get the IP during the install stage.

[pocopico]

OK, try with the minimum extensions. e.g. only r8125 and start adding one by one to see which one is causing you problems.

[yyaocsyy]

Hi pocopico,

Thanks for your reply and help.
I have tried the minimum extensions only with r8125 but seems still not work.

Next I will try to distclean build and then try again. and even without r8125, but once without r8125 it seems I can't do any estimate.
And I also check the H510i MB with MSI, it seems there is no any com port, so it seems I can't get any kernel boot log.