Does this app clash with fan curves defined in BIOS?

[kelltom]

I use an ASUS board and have a bunch of QFan curves set up. Will this app override these settings, or re-write them?

[Rem0o]

Override. As soon as your computer restarts, go to sleep, or the app closes, everything resets.

[Mandoscottie]

ive found best setup is PWM on all devices and set to full speed (turbo run slightly lower than 100%) in Asus Bios. that way until windows loads, and fan control starts, all fans run at 100% once in windows all control is via FC.

ive added a mix curve for CPU fans (2x140s on a 280mm rad up top) and case fans, while leaving the 3080tis fans controlled from GPU temp. The mix curve is used for all other case fans on CPU/GPU temps, ive found this works very effectively with the 3080ti boosting higher than ever thanks to the improved thermal management.

[liamauve]

all fans at 100% during boot is not "best setup"