Skip to content

Latest commit

 

History

History
37 lines (31 loc) · 1.38 KB

README.md

File metadata and controls

37 lines (31 loc) · 1.38 KB
Raw

RAK11300 LoRa Module on m.2 Key A-E

This is a board in the m.2 Key A-E form factor to allow the use of the RAK11300 module.

RAK11300 contains an RP2040 microcontroller, an SX1262 and supporting circuitry on a castellated green PCB. The RAK11300 provides 8xx-9xxMhz-Band communications, depending on the model used. The RAK11300L variant may be substituted, and operates on 433 or 470 Mhz depending on the model.

m.2 Pins Used

  • PERST0n
  • Vendor-Defined 38,40,42
  • W_DISABLEn
  • LED_1n
  • LED_2n
  • USB+/-

RAK11300 Pins Used

  • RESETn
  • BOOT
  • SWCLK/SWDIO
  • GPIO6, 9, 22, 23, 24
  • USB_DP/_DM

Project Status

  • Schematic Creation
  • PCB Creation
    • PCB Layout
    • TODO: Verify BOOT/SWCLK/SWDIO pinout vs other modules for ease of use
    • TODO: Calculate LED series resistors where needed
  • Initial PCB Test Run
    • Finalize BOM
    • Assembly
  • PCB Testing

References