From fca5520039f752597af6d23218e6825ae323829f Mon Sep 17 00:00:00 2001 From: Sinbiosis Date: Sun, 8 Jan 2023 00:36:08 -0500 Subject: [PATCH] ramips: Add support for D-Link DIR-3040 A1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds support for the A1 hardware revision of the DIR-3040. It is an exact copy of the DIR-3060 save for some cosmetic changes to the housing. Even going so far as having the same FCC ID. Hardware specification: SoC: MediaTek MT7621AT Flash: Winbond W29N01HVSINA 128MB RAM: Micron MT41K128M16JT-125 256MB Ethernet: 5x 10/100/1000 Mbps WiFi1: MT7615DN 2.4GHz N 2x2:2 WiFi2: MT7615DN 5GHz AC 2x2:2 WiFi3: MT7615N 5GHz AC 4x4:4 Button: WPS, Reset Flash instructions: OpenWrt can be installed via D-Link Recovery GUI: NOTE: Seems to only work in Firefox on Windows. Tried with Chrome on Windows, Firefox in Linux, and Chromium in Linux. None of these other browsers worked. 1. Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. 2. Give it ~30 seconds, to boot the recovery mode GUI 3. Connect your client computer to LAN1 of the device 4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0. 5. Call the recovery page for the device at http://192.168.0.1/ 6. Use the provided emergency web GUI to upload and flash a new firmware to the device Thanks to @Lucky1openwrt and @iivailo for creating the DIR-3060 DTS file and related changes, so it was possible for me to adapt them to the DIR-3040, build images, test and fix minor issues. MAC Addresses: | use | address | example | | --- | --- | --- | | LAN | label | f4:*:61 | | WAN | label + 4 | f4:*:65 | | WI1/2g | label + 1 | f4:*:62 | | WI1/5g | label + 1 | f4:*:62 | | WI2/5g | label + 3 | f4:*:64 | The label MAC address was found in Factory, 0xe000 Checklist: ✓ nand ✓ ethernet ✓ button ✓ wifi2g ✓ wifi5g ✓ wifi5g ✓ mac ✓ led Signed-off-by: Sinbiosis --- .../ramips/dts/mt7621_dlink_dir-3040-a1.dts | 60 +++++++++++++++++++ .../ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi | 4 +- target/linux/ramips/image/mt7621.mk | 7 +++ .../mt7621/base-files/etc/board.d/01_leds | 1 + .../mt7621/base-files/lib/upgrade/platform.sh | 1 + 5 files changed, 71 insertions(+), 2 deletions(-) create mode 100644 target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts new file mode 100644 index 00000000000000..51a440cb832c56 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-3040-a1.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_dlink_dir-xx60-a1.dtsi" + +/ { + compatible = "dlink,dir-3040-a1", "mediatek,mt7621-soc"; + model = "D-Link DIR-3040 A1"; +}; + +&wps { + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; +}; + +&leds { + usb2_white { + label = "white:usb2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3_white { + label = "white:usb3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wlan2g { + label = "white:wlan2g"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0radio"; + }; + + wlan5glb { + label = "white:wlan5glb"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1radio"; + }; + + wlan5ghb { + label = "white:wlan5ghb"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy2radio"; + }; +}; + + +&wifi0 { + mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 1>; + nvmem-cell-names = "eeprom", "mac-address"; + ieee80211-freq-limit = <2400000 6000000>; +}; + +&wifi1 { + mediatek,mtd-eeprom = <&factory 0x8000>; + nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 3>; + nvmem-cell-names = "eeprom", "mac-address"; +}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi index 6eb3f3cdd9bf7d..509975c316ef81 100644 --- a/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi +++ b/target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi @@ -14,7 +14,7 @@ led-upgrade = &led_net_orange; }; - keys { + keys: keys { compatible = "gpio-keys"; reset { @@ -23,7 +23,7 @@ linux,code = ; }; - wps { + wps: wps { label = "wps"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index ab1b829ba0086c..2790c5c2d9f092 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -783,6 +783,13 @@ define Device/dlink_dir-2660-a1 endef TARGET_DEVICES += dlink_dir-2660-a1 +define Device/dlink_dir-3040-a1 + $(Device/dlink_dir-xx60-a1) + DEVICE_MODEL := DIR-3040 + DEVICE_VARIANT := A1 +endef +TARGET_DEVICES += dlink_dir-3040-a1 + define Device/dlink_dir-3060-a1 $(Device/dlink_dir-xx60-a1) DEVICE_MODEL := DIR-3060 diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 1061de6f44443e..d732316f7ed7aa 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -95,6 +95,7 @@ dlink,dir-2640-a1|\ dlink,dir-2660-a1) ucidef_set_led_netdev "wan" "wan" "white:net" "wan" ;; +dlink,dir-3040-a1|\ dlink,dir-3060-a1) ucidef_set_led_netdev "net_white" "WAN Link" "white:net" "wan" "link" ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:net" "wan" "tx rx" diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 40a2fb61dbb9c9..9695e8f858394b 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -68,6 +68,7 @@ platform_do_upgrade() { dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ + dlink,dir-3040-a1|\ dlink,dir-3060-a1|\ dlink,dir-853-a3|\ etisalat,s3|\