diff --git a/.gitignore b/.gitignore
index 7cf2fef..8b157a8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -16,6 +16,7 @@ _autosave-*
*-save.pro
*-save.kicad_pcb
fp-info-cache
+.DS_Store
# Netlist files (exported from Eeschema)
*.net
diff --git a/README.md b/README.md
index a680c23..f926d60 100644
--- a/README.md
+++ b/README.md
@@ -1,25 +1,13 @@
-# Swoop
+# Arkenswoop
-A WIP fork of [David Barr's Sweep](https://github.com/davidphilipbarr/Sweep), which is itself based on the fabulous [Ferris by Pierre Chevalier](https://github.com/pierrechevalier83/ferris).
-
-There are two editions of the Swoop.
-
-
-
-
-
-
-
-
-## Swoop LP 🦀
-
-![](./images/swoop_small.jpg)
+A WIP fork of [jimmerricks's Swoop](https://github.com/jimmerricks/swoop), which is a fork of [David Barr's Sweep](https://github.com/davidphilipbarr/Sweep), which is itself based on the fabulous [Ferris by Pierre Chevalier](https://github.com/pierrechevalier83/ferris).
| Front | Back |
| :---: | :---: |
-| ![front](/images/exports/swoop/front.png) | ![back](/images/exports/swoop/back.png) |
+| ![front](/images/exports/arkenswoop/front.png) | ![back](/images/exports/arkenswoop/back.png) |
### Features
+
⭕ Low profile Kailh Choc switches
⭕ Per-key RGB LEDs (mini-e)
⭕ Dual side-scrolling encoder
@@ -30,9 +18,10 @@ There are two editions of the Swoop.
### Components list
-To build and use a Swoop LP you will need:
+To build and use an Arkenswoop you will need:
* 1× PCB Kit
+* 1× back plate kit (optional)
* 2× promicro compatible boards or 2 nice!nanos.
* 34× Kailh Choc v1 switches
* 34× SK6812 Mini-E RGB SMD Leds (optional; not recommended for wireless)
@@ -40,47 +29,14 @@ To build and use a Swoop LP you will need:
* 2× side-scrolling encoders
* 2× OLED LCD Display 128x32 SSD1306 (optional)
* 2× reset switches (optional; B3U-1000P(M))
-* Some little rubber feet/bumpers
+* Some little rubber feet/bumpers (a minimum of 4 on each side)
* 2× power switches (wireless only; MSK 12C02)
* 2× lipo batteries (wireless only; 301230 or 301228)
* 1× TRRS (not TRS!) cable (wired only)
* 2× TRRS Jack [PJ-320A] (wired only)
* 1× USB Cable (depends on your micro-controller choice)
-## Swoop MX / Howarya 🦞
-
-![](./images/howarya_small.jpg)
-
-| Front | Back |
-| :---: | :---: |
-| ![front](/images/exports/howarya/front.png) | ![back](/images/exports/howarya/back.png) |
-
-### Features
-⭕ Cherry MX style switches
-⭕ Hotswap support
-⭕ Per-key RGB LEDs (mini-e)
-⭕ Up to 2 encoders
-⭕ Oled screens
-⭕ Power switch for battery management
-⭕ Bluetooth support w/ nice!nano
-⭕ Plate style case with mcu cover
-
-### Components list
+### Todo
-To build and use a Swoop MX you will need:
-
-* 1× PCB Kit
-* 2× promicro compatible boards or 2 nice!nanos.
-* 34-36× Cherry MX style switches
-* 34-36× Kailh hotswap sockets
-* 34-36× SK6812 Mini-E RGB SMD Leds (optional; not recommended for wireless)
-* 34-36× keycaps
-* 2× Rotary encoders & knobs (optional)
-* 2× OLED LCD Display 128x32 SSD1306 (optional)
-* 2× reset switches (optional; B3U-1000P(M))
-* Some little rubber feet/bumpers
-* 2× power switches (wireless only; MSK 12C02)
-* 2× lipo batteries (wireless only; 301230 or 301228)
-* 1× TRRS (not TRS!) cable (wired only)
-* 2× TRRS Jack [PJ-320A] (wired only)
-* 1× USB Cable (depends on your micro-controller choice)
+- [ ] add hotswap socket support
+- [ ] convert the SMD diodes to through hole diodes to ease soldering
diff --git a/howarya-drc.txt b/howarya-drc.txt
deleted file mode 100644
index f83749d..0000000
--- a/howarya-drc.txt
+++ /dev/null
@@ -1,3972 +0,0 @@
-** Drc report for /mnt/e/Git/swoop-docs/pcbs/howarya/howarya.kicad_pcb **
-** Created on 2022-09-02 01:02:46 **
-
-** Found 992 DRC violations **
-[track_dangling]: Track has unconnected end
- Local override; Severity: warning
- @(162.5490 mm, 134.6024 mm): Track [VCC] on B.Cu, length 0.1883 mm
-[track_dangling]: Track has unconnected end
- Local override; Severity: warning
- @(163.0554 mm, 102.7817 mm): Track [VCC] on B.Cu, length 0.0213 mm
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1995 mm)
- Rule: netclass 'Thick'; Severity: error
- @(119.5813 mm, 110.7979 mm): Via [GND] on F.Cu - B.Cu
- @(118.8818 mm, 113.6219 mm): Track [VCC] on B.Cu, length 5.2020 mm
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1995 mm)
- Rule: netclass 'Default'; Severity: error
- @(168.6484 mm, 120.6872 mm): Track [led] on F.Cu, length 5.1138 mm
- @(170.2886 mm, 123.2106 mm): Via [sda] on F.Cu - B.Cu
-[hole_clearance]: Hole clearance violation (board setup constraints hole clearance 0.2540 mm; actual 0.1203 mm)
- Rule: board setup constraints hole; Severity: error
- @(114.3936 mm, 141.5134 mm): Through hole pad S1 [col2] of EN1
- @(114.3536 mm, 139.0934 mm): Through hole pad [] of SW16
-[hole_clearance]: Hole clearance violation (board setup constraints hole clearance 0.2540 mm; actual 0.1203 mm)
- Rule: board setup constraints hole; Severity: error
- @(119.3936 mm, 141.5134 mm): Through hole pad S2 [er0] of EN1
- @(119.4336 mm, 139.0934 mm): Through hole pad [] of SW16
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 119.2766 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 119.2766 mm): Pad 11 [eda] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 116.7366 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 116.7366 mm): Pad 10 [row3] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 121.8166 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 121.8166 mm): Pad 12 [edb] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 121.8166 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 121.8166 mm): Pad 13 [unconnected-(U1-Pad13)] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(161.0545 mm, 101.4966 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 101.4966 mm): Pad 21 [VCC] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 106.5766 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 106.5766 mm): Pad 6 [sla] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 104.0366 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 104.0366 mm): Pad 20 [col4] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(172.7385 mm, 93.8766 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 93.8766 mm): Pad 24 [raw] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 106.5766 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 106.5766 mm): Pad 19 [col3] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 104.0366 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 104.0366 mm): Pad 5 [sda] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(161.0545 mm, 96.4166 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 96.4166 mm): Pad 23 [GND] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 121.8166 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 121.8166 mm): Pad 12 [edb] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 119.2766 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 119.2766 mm): Pad 14 [unconnected-(U1-Pad14)] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 114.1966 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 114.1966 mm): Pad 16 [col0] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(172.7385 mm, 101.4966 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 101.4966 mm): Pad 4 [GND] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(161.0545 mm, 101.4966 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 101.4966 mm): Pad 4 [GND] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 121.8166 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 121.8166 mm): Pad 13 [unconnected-(U1-Pad13)] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(161.0545 mm, 98.9566 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 98.9566 mm): Pad 3 [GND] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 109.1166 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 109.1166 mm): Pad 7 [row0] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(172.7385 mm, 96.4166 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 96.4166 mm): Pad 23 [GND] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 96.4166 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 96.4166 mm): Pad 2 [data] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(172.7385 mm, 98.9566 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 98.9566 mm): Pad 3 [GND] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 114.1966 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 114.1966 mm): Pad 16 [col0] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 104.0366 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 104.0366 mm): Pad 5 [sda] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 111.6566 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 111.6566 mm): Pad 17 [col1] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 93.8766 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 93.8766 mm): Pad 1 [led] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 109.1166 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 109.1166 mm): Pad 7 [row0] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 114.1966 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 114.1966 mm): Pad 9 [row2] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 106.5766 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 106.5766 mm): Pad 6 [sla] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(172.7385 mm, 101.4966 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 101.4966 mm): Pad 21 [VCC] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(161.0545 mm, 93.8766 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 93.8766 mm): Pad 24 [raw] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 98.9566 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 98.9566 mm): Pad 22 [reset] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 116.7366 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 116.7366 mm): Pad 10 [row3] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 98.9566 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 98.9566 mm): Pad 22 [reset] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 119.2766 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 119.2766 mm): Pad 11 [eda] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 93.8766 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 93.8766 mm): Pad 1 [led] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 114.1966 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 114.1966 mm): Pad 9 [row2] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 111.6566 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 111.6566 mm): Pad 8 [row1] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 96.4166 mm): Pad [] of U1 on B.Cu
- @(162.0705 mm, 96.4166 mm): Pad 2 [data] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 116.7366 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 116.7366 mm): Pad 15 [unconnected-(U1-Pad15)] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 119.2766 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 119.2766 mm): Pad 14 [unconnected-(U1-Pad14)] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 106.5766 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 106.5766 mm): Pad 19 [col3] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 104.0366 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 104.0366 mm): Pad 20 [col4] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 111.6566 mm): Pad [] of U1 on F.Cu
- @(171.7225 mm, 111.6566 mm): Pad 8 [row1] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 109.1166 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 109.1166 mm): Pad 18 [col2] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 116.7366 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 116.7366 mm): Pad 15 [unconnected-(U1-Pad15)] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(161.0545 mm, 109.1166 mm): Pad [] of U1 on F.Cu
- @(162.0705 mm, 109.1166 mm): Pad 18 [col2] of U1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(172.7385 mm, 111.6566 mm): Pad [] of U1 on B.Cu
- @(171.7225 mm, 111.6566 mm): Pad 17 [col1] of U1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(163.0866 mm, 125.0783 mm): Pad [] of O1 on F.Cu
- @(163.0866 mm, 124.0623 mm): Pad 4 [GND] of O1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(170.7066 mm, 125.0783 mm): Pad [] of O1 on F.Cu
- @(170.7066 mm, 124.0623 mm): Pad 1 [sda] of O1 on F.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(170.7066 mm, 125.0783 mm): Pad [] of O1 on B.Cu
- @(170.7066 mm, 124.0623 mm): Pad 4 [GND] of O1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(168.1666 mm, 125.0783 mm): Pad [] of O1 on B.Cu
- @(168.1666 mm, 124.0623 mm): Pad 3 [VCC] of O1 on B.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(168.1666 mm, 125.0783 mm): Pad [] of O1 on F.Cu
- @(168.1666 mm, 124.0623 mm): Pad 2 [sla] of O1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(163.0866 mm, 125.0783 mm): Pad [] of O1 on B.Cu
- @(163.0866 mm, 124.0623 mm): Pad 1 [sda] of O1 on B.Cu
-[clearance]: Clearance violation (netclass 'Thick' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Thick'; Severity: error
- @(165.6266 mm, 125.0783 mm): Pad [] of O1 on F.Cu
- @(165.6266 mm, 124.0623 mm): Pad 3 [VCC] of O1 on F.Cu
-[clearance]: Clearance violation (netclass 'Default' clearance 0.2000 mm; actual 0.1527 mm)
- Rule: netclass 'Default'; Severity: error
- @(165.6266 mm, 125.0783 mm): Pad [] of O1 on B.Cu
- @(165.6266 mm, 124.0623 mm): Pad 2 [sla] of O1 on B.Cu
-[malformed_courtyard]: Footprint has malformed courtyard (not a closed shape)
- Local override; Severity: error
- @(119.4063 mm, 103.8125 mm): Footprint PUCK1
-[malformed_courtyard]: Footprint has malformed courtyard (not a closed shape)
- Local override; Severity: error
- @(119.4063 mm, 103.8125 mm): Footprint PUCK1
-[malformed_courtyard]: Footprint has malformed courtyard (not a closed shape)
- Local override; Severity: error
- @(119.4063 mm, 103.8125 mm): Footprint PUCK1
-[malformed_courtyard]: Footprint has malformed courtyard (not a closed shape)
- Local override; Severity: error
- @(119.4063 mm, 103.8125 mm): Footprint PUCK1
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.6314 mm, 72.7834 mm): Arc on Edge.Cuts
- @(88.3314 mm, 72.8321 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.6314 mm, 110.8834 mm): Arc on Edge.Cuts
- @(88.3314 mm, 110.9321 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.7314 mm, 92.3329 mm): Arc on Edge.Cuts
- @(126.4314 mm, 92.3816 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.6314 mm, 91.8334 mm): Arc on Edge.Cuts
- @(88.3314 mm, 91.8821 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.5814 mm, 122.8834 mm): Arc on Edge.Cuts
- @(69.2814 mm, 122.9321 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.5814 mm, 84.7834 mm): Arc on Edge.Cuts
- @(70.1888 mm, 85.7395 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.6814 mm, 104.8829 mm): Arc on Edge.Cuts
- @(107.3814 mm, 104.9316 mm): Track [GND] on F.Cu, length 1.3021 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.7314 mm, 111.3829 mm): Arc on Edge.Cuts
- @(126.4314 mm, 111.4316 mm): Track [GND] on F.Cu, length 1.3021 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.5814 mm, 103.8334 mm): Arc on Edge.Cuts
- @(69.2814 mm, 103.8821 mm): Track [GND] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2536 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.0314 mm, 88.8334 mm): Arc on Edge.Cuts
- @(92.4240 mm, 87.8773 mm): Track [VCC] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.0814 mm, 63.7829 mm): Arc on Edge.Cuts
- @(112.3814 mm, 63.7342 mm): Track [VCC] on F.Cu, length 1.2897 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.1814 mm, 110.8829 mm): Arc on Edge.Cuts
- @(150.4814 mm, 110.8342 mm): Track [VCC] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.1314 mm, 108.3829 mm): Arc on Edge.Cuts
- @(131.4314 mm, 108.3342 mm): Track [VCC] on F.Cu, length 1.2897 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.0814 mm, 82.8329 mm): Arc on Edge.Cuts
- @(112.3814 mm, 82.7842 mm): Track [VCC] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.0314 mm, 69.7834 mm): Arc on Edge.Cuts
- @(92.4240 mm, 68.8273 mm): Track [VCC] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.1314 mm, 89.3329 mm): Arc on Edge.Cuts
- @(131.4314 mm, 89.2842 mm): Track [VCC] on F.Cu, length 1.2897 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.0814 mm, 101.8829 mm): Arc on Edge.Cuts
- @(112.3814 mm, 101.8342 mm): Track [VCC] on F.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2537 mm)
- Rule: board setup constraints edge; Severity: error
- @(118.0936 mm, 130.4334 mm): Arc on Edge.Cuts
- @(119.3936 mm, 130.4821 mm): Track [VCC] on B.Cu, length 1.2833 mm
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.1600 mm)
- Rule: board setup constraints edge; Severity: error
- @(72.9814 mm, 84.7834 mm): Arc on Edge.Cuts
- @(74.2814 mm, 84.1984 mm): Pad 1 [VCC] of L1 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 84.7834 mm): Line on Edge.Cuts
- @(73.9314 mm, 83.3234 mm): Through hole pad 1 [VCC] of L1
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 84.7834 mm): Line on Edge.Cuts
- @(74.2814 mm, 82.4484 mm): Pad 1 [VCC] of L1 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.1600 mm)
- Rule: board setup constraints edge; Severity: error
- @(72.9814 mm, 84.7834 mm): Arc on Edge.Cuts
- @(74.2814 mm, 84.1984 mm): Pad 2 [Net-(L1-Pad2)] of L1 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 84.7834 mm): Line on Edge.Cuts
- @(74.2814 mm, 82.4484 mm): Pad 2 [Net-(L1-Pad2)] of L1 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 81.7834 mm): Line on Edge.Cuts
- @(69.2814 mm, 82.4484 mm): Pad 3 [GND] of L1 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.1600 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.5814 mm, 84.7834 mm): Arc on Edge.Cuts
- @(69.2814 mm, 84.1984 mm): Pad 3 [GND] of L1 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 81.7834 mm): Line on Edge.Cuts
- @(69.2814 mm, 82.4484 mm): Pad 4 [Net-(L1-Pad4)] of L1 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.1600 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.5814 mm, 84.7834 mm): Arc on Edge.Cuts
- @(69.2814 mm, 84.1984 mm): Pad 4 [Net-(L1-Pad4)] of L1 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 81.7834 mm): Line on Edge.Cuts
- @(69.6314 mm, 83.3234 mm): Through hole pad 4 [Net-(L1-Pad4)] of L1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 81.7834 mm): Line on Edge.Cuts
- @(70.0814 mm, 81.8736 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 81.7834 mm): Line on Edge.Cuts
- @(70.0814 mm, 83.0232 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.5814 mm, 84.7834 mm): Arc on Edge.Cuts
- @(68.3314 mm, 84.7736 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 81.7834 mm): Line on Edge.Cuts
- @(68.3314 mm, 83.6236 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 75.7829 mm): Line on Edge.Cuts
- @(150.1314 mm, 74.3229 mm): Through hole pad 1 [VCC] of L5
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.1814 mm, 72.7829 mm): Arc on Edge.Cuts
- @(150.4814 mm, 73.4479 mm): Pad 1 [VCC] of L5 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 75.7829 mm): Line on Edge.Cuts
- @(150.4814 mm, 75.1979 mm): Pad 1 [VCC] of L5 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.1814 mm, 72.7829 mm): Arc on Edge.Cuts
- @(150.4814 mm, 73.4479 mm): Pad 2 [Net-(L4-Pad4)] of L5 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 75.7829 mm): Line on Edge.Cuts
- @(150.4814 mm, 75.1979 mm): Pad 2 [Net-(L4-Pad4)] of L5 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(145.4814 mm, 75.1979 mm): Pad 3 [GND] of L5 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.7814 mm, 72.7829 mm): Arc on Edge.Cuts
- @(145.4814 mm, 73.4479 mm): Pad 3 [GND] of L5 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.7814 mm, 72.7829 mm): Arc on Edge.Cuts
- @(145.4814 mm, 73.4479 mm): Pad 4 [Net-(L5-Pad4)] of L5 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(145.8314 mm, 74.3229 mm): Through hole pad 4 [Net-(L5-Pad4)] of L5
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(145.4814 mm, 75.1979 mm): Pad 4 [Net-(L5-Pad4)] of L5 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(146.2814 mm, 74.0227 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(146.2814 mm, 72.8731 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(144.5314 mm, 75.7731 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 72.7829 mm): Line on Edge.Cuts
- @(144.5314 mm, 74.6231 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 72.7834 mm): Line on Edge.Cuts
- @(93.3314 mm, 72.1984 mm): Pad 1 [VCC] of L2 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 72.7834 mm): Line on Edge.Cuts
- @(93.3314 mm, 70.4484 mm): Pad 1 [VCC] of L2 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 72.7834 mm): Line on Edge.Cuts
- @(92.9814 mm, 71.3234 mm): Through hole pad 1 [VCC] of L2
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 72.7834 mm): Line on Edge.Cuts
- @(93.3314 mm, 72.1984 mm): Pad 2 [Net-(L2-Pad2)] of L2 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 72.7834 mm): Line on Edge.Cuts
- @(93.3314 mm, 70.4484 mm): Pad 2 [Net-(L2-Pad2)] of L2 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(88.3314 mm, 70.4484 mm): Pad 3 [GND] of L2 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(88.3314 mm, 72.1984 mm): Pad 3 [GND] of L2 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(88.3314 mm, 70.4484 mm): Pad 4 [Net-(L2-Pad4)] of L2 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(88.6814 mm, 71.3234 mm): Through hole pad 4 [Net-(L2-Pad4)] of L2
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(88.3314 mm, 72.1984 mm): Pad 4 [Net-(L2-Pad4)] of L2 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(89.1314 mm, 69.8736 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(89.1314 mm, 71.0232 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(87.3814 mm, 72.7736 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 69.7834 mm): Line on Edge.Cuts
- @(87.3814 mm, 71.6236 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 104.8829 mm): Line on Edge.Cuts
- @(112.0314 mm, 103.4229 mm): Through hole pad 1 [VCC] of L13
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 104.8829 mm): Line on Edge.Cuts
- @(112.3814 mm, 102.5479 mm): Pad 1 [VCC] of L13 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 104.8829 mm): Line on Edge.Cuts
- @(112.3814 mm, 104.2979 mm): Pad 1 [VCC] of L13 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 104.8829 mm): Line on Edge.Cuts
- @(112.3814 mm, 102.5479 mm): Pad 2 [Net-(L8-Pad4)] of L13 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 104.8829 mm): Line on Edge.Cuts
- @(112.3814 mm, 104.2979 mm): Pad 2 [Net-(L8-Pad4)] of L13 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(107.3814 mm, 102.5479 mm): Pad 3 [GND] of L13 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(107.3814 mm, 104.2979 mm): Pad 3 [GND] of L13 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(107.3814 mm, 102.5479 mm): Pad 4 [Net-(L17-Pad2)] of L13 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(107.7314 mm, 103.4229 mm): Through hole pad 4 [Net-(L17-Pad2)] of L13
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(107.3814 mm, 104.2979 mm): Pad 4 [Net-(L17-Pad2)] of L13 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(108.1814 mm, 103.1227 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(108.1814 mm, 101.9731 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(106.4314 mm, 103.7231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 101.8829 mm): Line on Edge.Cuts
- @(106.4314 mm, 104.8731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 66.7829 mm): Line on Edge.Cuts
- @(112.3814 mm, 64.4479 mm): Pad 1 [VCC] of L3 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 66.7829 mm): Line on Edge.Cuts
- @(112.0314 mm, 65.3229 mm): Through hole pad 1 [VCC] of L3
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 66.7829 mm): Line on Edge.Cuts
- @(112.3814 mm, 66.1979 mm): Pad 1 [VCC] of L3 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 66.7829 mm): Line on Edge.Cuts
- @(112.3814 mm, 66.1979 mm): Pad 2 [Net-(L2-Pad4)] of L3 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 66.7829 mm): Line on Edge.Cuts
- @(112.3814 mm, 64.4479 mm): Pad 2 [Net-(L2-Pad4)] of L3 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(107.3814 mm, 64.4479 mm): Pad 3 [GND] of L3 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(107.3814 mm, 66.1979 mm): Pad 3 [GND] of L3 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(107.7314 mm, 65.3229 mm): Through hole pad 4 [Net-(L3-Pad4)] of L3
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(107.3814 mm, 66.1979 mm): Pad 4 [Net-(L3-Pad4)] of L3 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(107.3814 mm, 64.4479 mm): Pad 4 [Net-(L3-Pad4)] of L3 on F.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(108.1814 mm, 63.8731 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(108.1814 mm, 65.0227 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(106.4314 mm, 65.6231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 63.7829 mm): Line on Edge.Cuts
- @(106.4314 mm, 66.7731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(118.5936 mm, 130.4334 mm): Line on Edge.Cuts
- @(119.3936 mm, 129.8484 mm): Pad 1 [VCC] of L16 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(118.5936 mm, 130.4334 mm): Line on Edge.Cuts
- @(119.3936 mm, 128.0984 mm): Pad 1 [VCC] of L16 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(118.5936 mm, 130.4334 mm): Line on Edge.Cuts
- @(119.0436 mm, 128.9734 mm): Through hole pad 1 [VCC] of L16
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(118.5936 mm, 130.4334 mm): Line on Edge.Cuts
- @(119.3936 mm, 128.0984 mm): Pad 2 [unconnected-(L16-Pad2)] of L16 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(118.5936 mm, 130.4334 mm): Line on Edge.Cuts
- @(119.3936 mm, 129.8484 mm): Pad 2 [unconnected-(L16-Pad2)] of L16 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(114.3936 mm, 129.8484 mm): Pad 3 [GND] of L16 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(114.3936 mm, 128.0984 mm): Pad 3 [GND] of L16 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(114.7436 mm, 128.9734 mm): Through hole pad 4 [Net-(L1-Pad2)] of L16
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(114.3936 mm, 128.0984 mm): Pad 4 [Net-(L1-Pad2)] of L16 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(114.3936 mm, 129.8484 mm): Pad 4 [Net-(L1-Pad2)] of L16 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(115.1936 mm, 128.6732 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(115.1936 mm, 127.5236 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(113.4436 mm, 130.4236 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(115.1936 mm, 127.4334 mm): Line on Edge.Cuts
- @(113.4436 mm, 129.2736 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2499 mm)
- Rule: board setup constraints edge; Severity: error
- @(176.2871 mm, 87.9830 mm): Line on Edge.Cuts
- @(174.2872 mm, 87.9830 mm): Through hole pad [] of Ref**
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 94.8329 mm): Line on Edge.Cuts
- @(150.1314 mm, 93.3729 mm): Through hole pad 1 [VCC] of L10
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 94.8329 mm): Line on Edge.Cuts
- @(150.4814 mm, 92.4979 mm): Pad 1 [VCC] of L10 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 94.8329 mm): Line on Edge.Cuts
- @(150.4814 mm, 94.2479 mm): Pad 1 [VCC] of L10 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 94.8329 mm): Line on Edge.Cuts
- @(150.4814 mm, 94.2479 mm): Pad 2 [Net-(L5-Pad4)] of L10 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 94.8329 mm): Line on Edge.Cuts
- @(150.4814 mm, 92.4979 mm): Pad 2 [Net-(L5-Pad4)] of L10 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(145.4814 mm, 94.2479 mm): Pad 3 [GND] of L10 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(145.4814 mm, 92.4979 mm): Pad 3 [GND] of L10 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(145.4814 mm, 94.2479 mm): Pad 4 [Net-(L10-Pad4)] of L10 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(145.4814 mm, 92.4979 mm): Pad 4 [Net-(L10-Pad4)] of L10 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(145.8314 mm, 93.3729 mm): Through hole pad 4 [Net-(L10-Pad4)] of L10
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(146.2814 mm, 91.9231 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(146.2814 mm, 93.0727 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(144.5314 mm, 94.8231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 91.8329 mm): Line on Edge.Cuts
- @(144.5314 mm, 93.6731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2475 mm)
- Rule: board setup constraints edge; Severity: error
- @(159.5058 mm, 87.9833 mm): Arc on Edge.Cuts
- @(159.5059 mm, 87.9835 mm): Through hole pad [] of Ref**
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(161.0936 mm, 142.7322 mm): Line on Edge.Cuts
- @(162.2133 mm, 141.6928 mm): Through hole pad 1 [VCC] of L18
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(161.0936 mm, 142.7322 mm): Line on Edge.Cuts
- @(162.9540 mm, 141.1100 mm): Pad 1 [VCC] of L18 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(161.0936 mm, 142.7322 mm): Line on Edge.Cuts
- @(162.0790 mm, 142.6255 mm): Pad 1 [VCC] of L18 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(161.0936 mm, 142.7322 mm): Line on Edge.Cuts
- @(162.9540 mm, 141.1100 mm): Pad 2 [Net-(L18-Pad2)] of L18 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(161.0936 mm, 142.7322 mm): Line on Edge.Cuts
- @(162.0790 mm, 142.6255 mm): Pad 2 [Net-(L18-Pad2)] of L18 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(160.0822 mm, 138.6841 mm): Arc on Edge.Cuts
- @(158.6238 mm, 138.6100 mm): Pad 3 [GND] of L18 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(157.7488 mm, 140.1255 mm): Pad 3 [GND] of L18 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(157.7488 mm, 140.1255 mm): Pad 4 [led] of L18 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(158.4894 mm, 139.5428 mm): Through hole pad 4 [led] of L18
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(160.0822 mm, 138.6841 mm): Arc on Edge.Cuts
- @(158.6238 mm, 138.6100 mm): Pad 4 [led] of L18 on F.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(159.6040 mm, 138.5122 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(159.0292 mm, 139.5078 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(157.2135 mm, 139.1527 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(159.6491 mm, 138.4341 mm): Line on Edge.Cuts
- @(156.6385 mm, 140.1487 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2504 mm)
- Rule: board setup constraints edge; Severity: error
- @(161.8179 mm, 157.1277 mm): Line on Edge.Cuts
- @(170.1098 mm, 138.7647 mm): Through hole pad [] of Ref**
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 85.8329 mm): Line on Edge.Cuts
- @(112.0314 mm, 84.3729 mm): Through hole pad 1 [VCC] of L8
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.0814 mm, 82.8329 mm): Arc on Edge.Cuts
- @(112.3814 mm, 83.4979 mm): Pad 1 [VCC] of L8 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 85.8329 mm): Line on Edge.Cuts
- @(112.3814 mm, 85.2479 mm): Pad 1 [VCC] of L8 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.5814 mm, 85.8329 mm): Line on Edge.Cuts
- @(112.3814 mm, 85.2479 mm): Pad 2 [Net-(L3-Pad4)] of L8 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(111.0814 mm, 82.8329 mm): Arc on Edge.Cuts
- @(112.3814 mm, 83.4979 mm): Pad 2 [Net-(L3-Pad4)] of L8 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.6814 mm, 82.8329 mm): Arc on Edge.Cuts
- @(107.3814 mm, 83.4979 mm): Pad 3 [GND] of L8 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(107.3814 mm, 85.2479 mm): Pad 3 [GND] of L8 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(107.7314 mm, 84.3729 mm): Through hole pad 4 [Net-(L8-Pad4)] of L8
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.6814 mm, 82.8329 mm): Arc on Edge.Cuts
- @(107.3814 mm, 83.4979 mm): Pad 4 [Net-(L8-Pad4)] of L8 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(107.3814 mm, 85.2479 mm): Pad 4 [Net-(L8-Pad4)] of L8 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(108.1814 mm, 82.9231 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(108.1814 mm, 84.0727 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(106.4314 mm, 85.8231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(108.1814 mm, 82.8329 mm): Line on Edge.Cuts
- @(106.4314 mm, 84.6731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 122.8834 mm): Line on Edge.Cuts
- @(74.2814 mm, 120.5484 mm): Pad 1 [VCC] of L11 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 122.8834 mm): Line on Edge.Cuts
- @(73.9314 mm, 121.4234 mm): Through hole pad 1 [VCC] of L11
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 122.8834 mm): Line on Edge.Cuts
- @(74.2814 mm, 122.2984 mm): Pad 1 [VCC] of L11 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 122.8834 mm): Line on Edge.Cuts
- @(74.2814 mm, 120.5484 mm): Pad 2 [Net-(L6-Pad4)] of L11 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 122.8834 mm): Line on Edge.Cuts
- @(74.2814 mm, 122.2984 mm): Pad 2 [Net-(L6-Pad4)] of L11 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(69.2814 mm, 120.5484 mm): Pad 3 [GND] of L11 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(69.2814 mm, 122.2984 mm): Pad 3 [GND] of L11 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(69.2814 mm, 122.2984 mm): Pad 4 [Net-(L11-Pad4)] of L11 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(69.6314 mm, 121.4234 mm): Through hole pad 4 [Net-(L11-Pad4)] of L11
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(69.2814 mm, 120.5484 mm): Pad 4 [Net-(L11-Pad4)] of L11 on F.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(70.0814 mm, 121.1232 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(70.0814 mm, 119.9736 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(68.3314 mm, 121.7236 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 119.8834 mm): Line on Edge.Cuts
- @(68.3314 mm, 122.8736 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(140.6531 mm, 133.5156 mm): Line on Edge.Cuts
- @(141.4657 mm, 132.2218 mm): Through hole pad 1 [VCC] of L17
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(140.6531 mm, 133.5156 mm): Line on Edge.Cuts
- @(141.5773 mm, 133.1576 mm): Pad 1 [VCC] of L17 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(140.6531 mm, 133.5156 mm): Line on Edge.Cuts
- @(142.0302 mm, 131.4672 mm): Pad 1 [VCC] of L17 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(140.6531 mm, 133.5156 mm): Line on Edge.Cuts
- @(141.5773 mm, 133.1576 mm): Pad 2 [Net-(L17-Pad2)] of L17 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(140.6531 mm, 133.5156 mm): Line on Edge.Cuts
- @(142.0302 mm, 131.4672 mm): Pad 2 [Net-(L17-Pad2)] of L17 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(137.2006 mm, 130.1731 mm): Pad 3 [GND] of L17 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(136.7476 mm, 131.8635 mm): Pad 3 [GND] of L17 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(137.3122 mm, 131.1089 mm): Through hole pad 4 [Net-(L17-Pad4)] of L17
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(136.7476 mm, 131.8635 mm): Pad 4 [Net-(L17-Pad4)] of L17 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(137.2006 mm, 130.1731 mm): Pad 4 [Net-(L17-Pad4)] of L17 on F.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(138.1221 mm, 129.8250 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(137.8245 mm, 130.9354 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(135.9788 mm, 131.0624 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(138.1454 mm, 129.7378 mm): Line on Edge.Cuts
- @(135.6811 mm, 132.1732 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 111.3829 mm): Line on Edge.Cuts
- @(131.0814 mm, 109.9229 mm): Through hole pad 1 [VCC] of L14
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 111.3829 mm): Line on Edge.Cuts
- @(131.4314 mm, 109.0479 mm): Pad 1 [VCC] of L14 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 111.3829 mm): Line on Edge.Cuts
- @(131.4314 mm, 110.7979 mm): Pad 1 [VCC] of L14 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 111.3829 mm): Line on Edge.Cuts
- @(131.4314 mm, 109.0479 mm): Pad 2 [Net-(L17-Pad4)] of L14 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 111.3829 mm): Line on Edge.Cuts
- @(131.4314 mm, 110.7979 mm): Pad 2 [Net-(L17-Pad4)] of L14 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(126.4314 mm, 110.7979 mm): Pad 3 [GND] of L14 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(126.4314 mm, 109.0479 mm): Pad 3 [GND] of L14 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(126.4314 mm, 109.0479 mm): Pad 4 [Net-(L14-Pad4)] of L14 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(126.7814 mm, 109.9229 mm): Through hole pad 4 [Net-(L14-Pad4)] of L14
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(126.4314 mm, 110.7979 mm): Pad 4 [Net-(L14-Pad4)] of L14 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(127.2314 mm, 109.6227 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(127.2314 mm, 108.4731 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(125.4814 mm, 110.2231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 108.3829 mm): Line on Edge.Cuts
- @(125.4814 mm, 111.3731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 113.8829 mm): Line on Edge.Cuts
- @(150.4814 mm, 113.2979 mm): Pad 1 [VCC] of L15 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 113.8829 mm): Line on Edge.Cuts
- @(150.4814 mm, 111.5479 mm): Pad 1 [VCC] of L15 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 113.8829 mm): Line on Edge.Cuts
- @(150.1314 mm, 112.4229 mm): Through hole pad 1 [VCC] of L15
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 113.8829 mm): Line on Edge.Cuts
- @(150.4814 mm, 111.5479 mm): Pad 2 [Net-(L10-Pad4)] of L15 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(149.6814 mm, 113.8829 mm): Line on Edge.Cuts
- @(150.4814 mm, 113.2979 mm): Pad 2 [Net-(L10-Pad4)] of L15 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(145.4814 mm, 111.5479 mm): Pad 3 [GND] of L15 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(145.4814 mm, 113.2979 mm): Pad 3 [GND] of L15 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(145.4814 mm, 111.5479 mm): Pad 4 [Net-(L18-Pad2)] of L15 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(145.8314 mm, 112.4229 mm): Through hole pad 4 [Net-(L18-Pad2)] of L15
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(145.4814 mm, 113.2979 mm): Pad 4 [Net-(L18-Pad2)] of L15 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(146.2814 mm, 112.1227 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(146.2814 mm, 110.9731 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(144.5314 mm, 112.7231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(146.2814 mm, 110.8829 mm): Line on Edge.Cuts
- @(144.5314 mm, 113.8731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 92.3329 mm): Line on Edge.Cuts
- @(131.0814 mm, 90.8729 mm): Through hole pad 1 [VCC] of L9
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 92.3329 mm): Line on Edge.Cuts
- @(131.4314 mm, 91.7479 mm): Pad 1 [VCC] of L9 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 92.3329 mm): Line on Edge.Cuts
- @(131.4314 mm, 89.9979 mm): Pad 1 [VCC] of L9 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 92.3329 mm): Line on Edge.Cuts
- @(131.4314 mm, 89.9979 mm): Pad 2 [Net-(L14-Pad4)] of L9 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 92.3329 mm): Line on Edge.Cuts
- @(131.4314 mm, 91.7479 mm): Pad 2 [Net-(L14-Pad4)] of L9 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(126.4314 mm, 91.7479 mm): Pad 3 [GND] of L9 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(126.4314 mm, 89.9979 mm): Pad 3 [GND] of L9 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(126.4314 mm, 89.9979 mm): Pad 4 [Net-(L4-Pad2)] of L9 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(126.7814 mm, 90.8729 mm): Through hole pad 4 [Net-(L4-Pad2)] of L9
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(126.4314 mm, 91.7479 mm): Pad 4 [Net-(L4-Pad2)] of L9 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(127.2314 mm, 89.4231 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(127.2314 mm, 90.5727 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(125.4814 mm, 92.3231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 89.3329 mm): Line on Edge.Cuts
- @(125.4814 mm, 91.1731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.1314 mm, 70.2829 mm): Arc on Edge.Cuts
- @(131.4314 mm, 70.9479 mm): Pad 1 [VCC] of L4 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 73.2829 mm): Line on Edge.Cuts
- @(131.0814 mm, 71.8229 mm): Through hole pad 1 [VCC] of L4
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 73.2829 mm): Line on Edge.Cuts
- @(131.4314 mm, 72.6979 mm): Pad 1 [VCC] of L4 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.1314 mm, 70.2829 mm): Arc on Edge.Cuts
- @(131.4314 mm, 70.9479 mm): Pad 2 [Net-(L4-Pad2)] of L4 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(130.6314 mm, 73.2829 mm): Line on Edge.Cuts
- @(131.4314 mm, 72.6979 mm): Pad 2 [Net-(L4-Pad2)] of L4 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.7314 mm, 70.2829 mm): Arc on Edge.Cuts
- @(126.4314 mm, 70.9479 mm): Pad 3 [GND] of L4 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(126.4314 mm, 72.6979 mm): Pad 3 [GND] of L4 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2400 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.7314 mm, 70.2829 mm): Arc on Edge.Cuts
- @(126.4314 mm, 70.9479 mm): Pad 4 [Net-(L4-Pad4)] of L4 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(126.7814 mm, 71.8229 mm): Through hole pad 4 [Net-(L4-Pad4)] of L4
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(126.4314 mm, 72.6979 mm): Pad 4 [Net-(L4-Pad4)] of L4 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(127.2314 mm, 70.3731 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(127.2314 mm, 71.5227 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(125.4814 mm, 72.1231 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(127.2314 mm, 70.2829 mm): Line on Edge.Cuts
- @(125.4814 mm, 73.2731 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 91.8334 mm): Line on Edge.Cuts
- @(93.3314 mm, 91.2484 mm): Pad 1 [VCC] of L7 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 91.8334 mm): Line on Edge.Cuts
- @(93.3314 mm, 89.4984 mm): Pad 1 [VCC] of L7 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 91.8334 mm): Line on Edge.Cuts
- @(92.9814 mm, 90.3734 mm): Through hole pad 1 [VCC] of L7
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 91.8334 mm): Line on Edge.Cuts
- @(93.3314 mm, 91.2484 mm): Pad 2 [Net-(L12-Pad4)] of L7 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 91.8334 mm): Line on Edge.Cuts
- @(93.3314 mm, 89.4984 mm): Pad 2 [Net-(L12-Pad4)] of L7 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(88.3314 mm, 91.2484 mm): Pad 3 [GND] of L7 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(88.3314 mm, 89.4984 mm): Pad 3 [GND] of L7 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(88.3314 mm, 89.4984 mm): Pad 4 [Net-(L2-Pad2)] of L7 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(88.3314 mm, 91.2484 mm): Pad 4 [Net-(L2-Pad2)] of L7 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(88.6814 mm, 90.3734 mm): Through hole pad 4 [Net-(L2-Pad2)] of L7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(89.1314 mm, 90.0732 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(89.1314 mm, 88.9236 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(87.3814 mm, 91.8236 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 88.8334 mm): Line on Edge.Cuts
- @(87.3814 mm, 90.6736 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 103.8334 mm): Line on Edge.Cuts
- @(74.2814 mm, 101.4984 mm): Pad 1 [VCC] of L6 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 103.8334 mm): Line on Edge.Cuts
- @(73.9314 mm, 102.3734 mm): Through hole pad 1 [VCC] of L6
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 103.8334 mm): Line on Edge.Cuts
- @(74.2814 mm, 103.2484 mm): Pad 1 [VCC] of L6 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 103.8334 mm): Line on Edge.Cuts
- @(74.2814 mm, 101.4984 mm): Pad 2 [Net-(L1-Pad4)] of L6 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(73.4814 mm, 103.8334 mm): Line on Edge.Cuts
- @(74.2814 mm, 103.2484 mm): Pad 2 [Net-(L1-Pad4)] of L6 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(69.2814 mm, 103.2484 mm): Pad 3 [GND] of L6 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(69.2814 mm, 101.4984 mm): Pad 3 [GND] of L6 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(69.6314 mm, 102.3734 mm): Through hole pad 4 [Net-(L6-Pad4)] of L6
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(69.2814 mm, 101.4984 mm): Pad 4 [Net-(L6-Pad4)] of L6 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(69.2814 mm, 103.2484 mm): Pad 4 [Net-(L6-Pad4)] of L6 on B.Cu
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(70.0814 mm, 100.9236 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(70.0814 mm, 102.0732 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(68.3314 mm, 102.6736 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(70.0814 mm, 100.8334 mm): Line on Edge.Cuts
- @(68.3314 mm, 103.8236 mm): Line on F.Silkscreen
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 110.8834 mm): Line on Edge.Cuts
- @(93.3314 mm, 108.5484 mm): Pad 1 [VCC] of L12 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.1600 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.0314 mm, 110.8834 mm): Arc on Edge.Cuts
- @(93.3314 mm, 110.2984 mm): Pad 1 [VCC] of L12 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 110.8834 mm): Line on Edge.Cuts
- @(92.9814 mm, 109.4234 mm): Through hole pad 1 [VCC] of L12
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.1600 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.0314 mm, 110.8834 mm): Arc on Edge.Cuts
- @(93.3314 mm, 110.2984 mm): Pad 2 [Net-(L11-Pad4)] of L12 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(92.5314 mm, 110.8834 mm): Line on Edge.Cuts
- @(93.3314 mm, 108.5484 mm): Pad 2 [Net-(L11-Pad4)] of L12 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(88.3314 mm, 110.2984 mm): Pad 3 [GND] of L12 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(88.3314 mm, 108.5484 mm): Pad 3 [GND] of L12 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(88.3314 mm, 110.2984 mm): Pad 4 [Net-(L12-Pad4)] of L12 on B.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.0000 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(88.3314 mm, 108.5484 mm): Pad 4 [Net-(L12-Pad4)] of L12 on F.Cu
-[copper_edge_clearance]: Board edge clearance violation (board setup constraints edge clearance 0.2540 mm; actual 0.2214 mm)
- Rule: board setup constraints edge; Severity: error
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(88.6814 mm, 109.4234 mm): Through hole pad 4 [Net-(L12-Pad4)] of L12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(89.1314 mm, 109.1232 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(89.1314 mm, 107.9736 mm): Line on B.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(87.3814 mm, 110.8736 mm): Line on F.Silkscreen
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(89.1314 mm, 107.8834 mm): Line on Edge.Cuts
- @(87.3814 mm, 109.7236 mm): Line on F.Silkscreen
-[hole_near_hole]: Drilled holes too close together (board setup constraints min 0.2495 mm; actual 0.0000 mm)
- Rule: board setup constraints; Severity: error
- @(138.4564 mm, 88.4879 mm): Through hole pad [] of H3
- @(138.4564 mm, 86.3879 mm): Through hole pad [] of H3
-[hole_near_hole]: Drilled holes too close together (board setup constraints min 0.2495 mm; actual 0.0000 mm)
- Rule: board setup constraints; Severity: error
- @(81.3064 mm, 85.8884 mm): Through hole pad [] of H1
- @(81.3064 mm, 87.9884 mm): Through hole pad [] of H1
-[hole_near_hole]: Drilled holes too close together (board setup constraints min 0.2495 mm; actual 0.0000 mm)
- Rule: board setup constraints; Severity: error
- @(81.3064 mm, 123.9884 mm): Through hole pad [] of H2
- @(81.3064 mm, 126.0884 mm): Through hole pad [] of H2
-[hole_near_hole]: Drilled holes too close together (board setup constraints min 0.2495 mm; actual 0.0000 mm)
- Rule: board setup constraints; Severity: error
- @(119.4059 mm, 120.7629 mm): Through hole pad [] of H4
- @(119.4059 mm, 122.8629 mm): Through hole pad [] of H4
-[hole_near_hole]: Drilled holes too close together (board setup constraints min 0.2495 mm; actual 0.0000 mm)
- Rule: board setup constraints; Severity: error
- @(148.7231 mm, 139.0457 mm): Through hole pad [] of H4
- @(147.9195 mm, 140.9858 mm): Through hole pad [] of H4
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.4314 mm, 109.7629 mm): Line on F.Silkscreen
- @(106.0714 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.2314 mm, 109.5629 mm): Line on F.Silkscreen
- @(106.0714 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 96.0129 mm): Line on F.Silkscreen
- @(112.4214 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 96.0129 mm): Line on F.Silkscreen
- @(107.3414 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.0814 mm, 95.8129 mm): Line on F.Silkscreen
- @(112.4214 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 92.4129 mm): Line on F.Silkscreen
- @(113.6914 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 94.2129 mm): Line on F.Silkscreen
- @(112.4214 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 94.2129 mm): Line on F.Silkscreen
- @(107.3414 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 94.2129 mm): Line on F.Silkscreen
- @(113.6914 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 94.2129 mm): Line on F.Silkscreen
- @(106.0714 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.0314 mm, 92.6129 mm): Line on F.Silkscreen
- @(113.6914 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(113.7814 mm, 95.4129 mm): Line on F.Silkscreen
- @(112.4214 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(113.7814 mm, 95.4129 mm): Line on F.Silkscreen
- @(113.6914 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(109.4814 mm, 92.4129 mm): Line on F.Silkscreen
- @(113.6914 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.4314 mm, 90.7129 mm): Line on F.Silkscreen
- @(106.0714 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.2314 mm, 90.5129 mm): Line on F.Silkscreen
- @(106.0714 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.4314 mm, 71.6629 mm): Line on F.Silkscreen
- @(106.0714 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.2314 mm, 71.4629 mm): Line on F.Silkscreen
- @(106.0714 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.0314 mm, 73.5629 mm): Line on F.Silkscreen
- @(113.6914 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.0814 mm, 76.7629 mm): Line on F.Silkscreen
- @(112.4214 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 75.1629 mm): Line on F.Silkscreen
- @(107.3414 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 75.1629 mm): Line on F.Silkscreen
- @(106.0714 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 75.1629 mm): Line on F.Silkscreen
- @(113.6914 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 75.1629 mm): Line on F.Silkscreen
- @(112.4214 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 73.3629 mm): Line on F.Silkscreen
- @(113.6914 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(113.7814 mm, 76.3629 mm): Line on F.Silkscreen
- @(113.6914 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(113.7814 mm, 76.3629 mm): Line on F.Silkscreen
- @(112.4214 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(109.4814 mm, 73.3629 mm): Line on F.Silkscreen
- @(113.6914 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 76.9629 mm): Line on F.Silkscreen
- @(107.3414 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 76.9629 mm): Line on F.Silkscreen
- @(112.4214 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(105.7114 mm, 75.1629 mm): Line on F.Silkscreen
- @(107.3414 mm, 75.4429 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(105.7114 mm, 75.1629 mm): Line on F.Silkscreen
- @(106.0714 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.5814 mm, 71.9629 mm): Line on F.Silkscreen
- @(106.0714 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(109.3680 mm, 71.2368 mm): Arc on F.Silkscreen
- @(106.0714 mm, 72.9029 mm): Through hole pad [] of SW3
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.9314 mm, 129.6634 mm): Line on F.Silkscreen
- @(75.5914 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.6814 mm, 132.4634 mm): Line on F.Silkscreen
- @(75.5914 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.6814 mm, 132.4634 mm): Line on F.Silkscreen
- @(74.3214 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(71.3814 mm, 129.4634 mm): Line on F.Silkscreen
- @(75.5914 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 129.4634 mm): Line on F.Silkscreen
- @(75.5914 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.9814 mm, 132.8634 mm): Line on F.Silkscreen
- @(74.3214 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(67.6114 mm, 131.2634 mm): Line on F.Silkscreen
- @(69.2414 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(67.6114 mm, 131.2634 mm): Line on F.Silkscreen
- @(67.9714 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 131.2634 mm): Line on F.Silkscreen
- @(69.2414 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 131.2634 mm): Line on F.Silkscreen
- @(67.9714 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 131.2634 mm): Line on F.Silkscreen
- @(75.5914 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 131.2634 mm): Line on F.Silkscreen
- @(74.3214 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.4814 mm, 128.0634 mm): Line on F.Silkscreen
- @(67.9714 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.1314 mm, 127.5634 mm): Line on F.Silkscreen
- @(67.9714 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.3314 mm, 127.7634 mm): Line on F.Silkscreen
- @(67.9714 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(71.2680 mm, 127.3373 mm): Arc on F.Silkscreen
- @(67.9714 mm, 129.0034 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.4814 mm, 109.0134 mm): Line on F.Silkscreen
- @(67.9714 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.3314 mm, 108.7134 mm): Line on F.Silkscreen
- @(67.9714 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.1314 mm, 108.5134 mm): Line on F.Silkscreen
- @(67.9714 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(71.3814 mm, 110.4134 mm): Line on F.Silkscreen
- @(75.5914 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.6814 mm, 113.4134 mm): Line on F.Silkscreen
- @(75.5914 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.6814 mm, 113.4134 mm): Line on F.Silkscreen
- @(74.3214 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.9814 mm, 113.8134 mm): Line on F.Silkscreen
- @(74.3214 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 110.4134 mm): Line on F.Silkscreen
- @(75.5914 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.9314 mm, 110.6134 mm): Line on F.Silkscreen
- @(75.5914 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 112.2134 mm): Line on F.Silkscreen
- @(69.2414 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 112.2134 mm): Line on F.Silkscreen
- @(75.5914 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 112.2134 mm): Line on F.Silkscreen
- @(67.9714 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 112.2134 mm): Line on F.Silkscreen
- @(74.3214 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(67.6114 mm, 112.2134 mm): Line on F.Silkscreen
- @(69.2414 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(67.6114 mm, 112.2134 mm): Line on F.Silkscreen
- @(67.9714 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 114.0134 mm): Line on F.Silkscreen
- @(69.2414 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 114.0134 mm): Line on F.Silkscreen
- @(74.3214 mm, 112.4934 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(71.2680 mm, 108.2873 mm): Arc on F.Silkscreen
- @(67.9714 mm, 109.9534 mm): Through hole pad [] of SW6
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 133.0634 mm): Line on F.Silkscreen
- @(69.2414 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 133.0634 mm): Line on F.Silkscreen
- @(74.3214 mm, 131.5434 mm): Through hole pad [] of SW11
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(90.4314 mm, 117.4634 mm): Line on F.Silkscreen
- @(94.6414 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.9814 mm, 117.6634 mm): Line on F.Silkscreen
- @(94.6414 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 117.4634 mm): Line on F.Silkscreen
- @(94.6414 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.0314 mm, 120.8634 mm): Line on F.Silkscreen
- @(93.3714 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 121.0634 mm): Line on F.Silkscreen
- @(88.2914 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 121.0634 mm): Line on F.Silkscreen
- @(93.3714 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.1814 mm, 115.5634 mm): Line on F.Silkscreen
- @(87.0214 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(86.6614 mm, 119.2634 mm): Line on F.Silkscreen
- @(87.0214 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(86.6614 mm, 119.2634 mm): Line on F.Silkscreen
- @(88.2914 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.5314 mm, 116.0634 mm): Line on F.Silkscreen
- @(87.0214 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.3814 mm, 115.7634 mm): Line on F.Silkscreen
- @(87.0214 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 119.2634 mm): Line on F.Silkscreen
- @(87.0214 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 119.2634 mm): Line on F.Silkscreen
- @(88.2914 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 119.2634 mm): Line on F.Silkscreen
- @(94.6414 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 119.2634 mm): Line on F.Silkscreen
- @(93.3714 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(90.3180 mm, 115.3373 mm): Arc on F.Silkscreen
- @(87.0214 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(111.2436 mm, 135.1134 mm): Line on F.Silkscreen
- @(113.0836 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.7236 mm, 138.8134 mm): Line on F.Silkscreen
- @(113.0836 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.7236 mm, 138.8134 mm): Line on F.Silkscreen
- @(114.3536 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(111.4436 mm, 135.3134 mm): Line on F.Silkscreen
- @(113.0836 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(111.5936 mm, 135.6134 mm): Line on F.Silkscreen
- @(113.0836 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(116.4936 mm, 137.0134 mm): Line on F.Silkscreen
- @(120.7036 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(121.0436 mm, 137.2134 mm): Line on F.Silkscreen
- @(120.7036 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(120.7936 mm, 140.0134 mm): Line on F.Silkscreen
- @(119.4336 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(120.7936 mm, 140.0134 mm): Line on F.Silkscreen
- @(120.7036 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(121.0936 mm, 140.4134 mm): Line on F.Silkscreen
- @(119.4336 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(121.2436 mm, 137.0134 mm): Line on F.Silkscreen
- @(120.7036 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(119.4936 mm, 138.8134 mm): Line on F.Silkscreen
- @(113.0836 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(119.4936 mm, 138.8134 mm): Line on F.Silkscreen
- @(114.3536 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(119.4936 mm, 138.8134 mm): Line on F.Silkscreen
- @(119.4336 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(119.4936 mm, 138.8134 mm): Line on F.Silkscreen
- @(120.7036 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(121.2436 mm, 140.6134 mm): Line on F.Silkscreen
- @(114.3536 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(121.2436 mm, 140.6134 mm): Line on F.Silkscreen
- @(119.4336 mm, 139.0934 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(116.3802 mm, 134.8873 mm): Arc on F.Silkscreen
- @(113.0836 mm, 136.5534 mm): Through hole pad [] of SW16
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 102.0134 mm): Line on F.Silkscreen
- @(88.2914 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 102.0134 mm): Line on F.Silkscreen
- @(93.3714 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 100.2134 mm): Line on F.Silkscreen
- @(87.0214 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 100.2134 mm): Line on F.Silkscreen
- @(88.2914 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 100.2134 mm): Line on F.Silkscreen
- @(94.6414 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 100.2134 mm): Line on F.Silkscreen
- @(93.3714 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.9814 mm, 98.6134 mm): Line on F.Silkscreen
- @(94.6414 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.0314 mm, 101.8134 mm): Line on F.Silkscreen
- @(93.3714 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.5814 mm, 91.0129 mm): Line on F.Silkscreen
- @(106.0714 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(105.7114 mm, 94.2129 mm): Line on F.Silkscreen
- @(107.3414 mm, 94.4929 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(105.7114 mm, 94.2129 mm): Line on F.Silkscreen
- @(106.0714 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(109.3680 mm, 90.2868 mm): Arc on F.Silkscreen
- @(106.0714 mm, 91.9529 mm): Through hole pad [] of SW8
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(90.4314 mm, 98.4134 mm): Line on F.Silkscreen
- @(94.6414 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(86.6614 mm, 81.1634 mm): Line on F.Silkscreen
- @(88.2914 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(86.6614 mm, 81.1634 mm): Line on F.Silkscreen
- @(87.0214 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.3814 mm, 77.6634 mm): Line on F.Silkscreen
- @(87.0214 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.5314 mm, 77.9634 mm): Line on F.Silkscreen
- @(87.0214 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.1814 mm, 77.4634 mm): Line on F.Silkscreen
- @(87.0214 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(90.4314 mm, 79.3634 mm): Line on F.Silkscreen
- @(94.6414 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.9814 mm, 79.5634 mm): Line on F.Silkscreen
- @(94.6414 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 79.3634 mm): Line on F.Silkscreen
- @(94.6414 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.0314 mm, 82.7634 mm): Line on F.Silkscreen
- @(93.3714 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.7314 mm, 82.3634 mm): Line on F.Silkscreen
- @(93.3714 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.7314 mm, 82.3634 mm): Line on F.Silkscreen
- @(94.6414 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 81.1634 mm): Line on F.Silkscreen
- @(93.3714 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 81.1634 mm): Line on F.Silkscreen
- @(94.6414 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 81.1634 mm): Line on F.Silkscreen
- @(88.2914 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(93.4314 mm, 81.1634 mm): Line on F.Silkscreen
- @(87.0214 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 82.9634 mm): Line on F.Silkscreen
- @(93.3714 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 82.9634 mm): Line on F.Silkscreen
- @(88.2914 mm, 81.4434 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(90.3180 mm, 77.2373 mm): Arc on F.Silkscreen
- @(87.0214 mm, 78.9034 mm): Through hole pad [] of SW2
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.4814 mm, 89.9634 mm): Line on F.Silkscreen
- @(67.9714 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.1314 mm, 89.4634 mm): Line on F.Silkscreen
- @(67.9714 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(66.3314 mm, 89.6634 mm): Line on F.Silkscreen
- @(67.9714 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(71.3814 mm, 91.3634 mm): Line on F.Silkscreen
- @(75.5914 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.6814 mm, 94.3634 mm): Line on F.Silkscreen
- @(74.3214 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.6814 mm, 94.3634 mm): Line on F.Silkscreen
- @(75.5914 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.9314 mm, 91.5634 mm): Line on F.Silkscreen
- @(75.5914 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 93.1634 mm): Line on F.Silkscreen
- @(69.2414 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 93.1634 mm): Line on F.Silkscreen
- @(67.9714 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 93.1634 mm): Line on F.Silkscreen
- @(74.3214 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(74.3814 mm, 93.1634 mm): Line on F.Silkscreen
- @(75.5914 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(67.6114 mm, 93.1634 mm): Line on F.Silkscreen
- @(69.2414 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(67.6114 mm, 93.1634 mm): Line on F.Silkscreen
- @(67.9714 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 94.9634 mm): Line on F.Silkscreen
- @(69.2414 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 94.9634 mm): Line on F.Silkscreen
- @(74.3214 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(71.2680 mm, 89.2373 mm): Arc on F.Silkscreen
- @(67.9714 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(75.9814 mm, 94.7634 mm): Line on F.Silkscreen
- @(74.3214 mm, 93.4434 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(76.1314 mm, 91.3634 mm): Line on F.Silkscreen
- @(75.5914 mm, 90.9034 mm): Through hole pad [] of SW1
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.3814 mm, 96.7134 mm): Line on F.Silkscreen
- @(87.0214 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.5314 mm, 97.0134 mm): Line on F.Silkscreen
- @(87.0214 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(86.6614 mm, 100.2134 mm): Line on F.Silkscreen
- @(87.0214 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(86.6614 mm, 100.2134 mm): Line on F.Silkscreen
- @(88.2914 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(85.1814 mm, 96.5134 mm): Line on F.Silkscreen
- @(87.0214 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(90.3180 mm, 96.2873 mm): Arc on F.Silkscreen
- @(87.0214 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(109.4814 mm, 111.4629 mm): Line on F.Silkscreen
- @(113.6914 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.0814 mm, 114.8629 mm): Line on F.Silkscreen
- @(112.4214 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 111.4629 mm): Line on F.Silkscreen
- @(113.6914 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(113.7814 mm, 114.4629 mm): Line on F.Silkscreen
- @(112.4214 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(113.7814 mm, 114.4629 mm): Line on F.Silkscreen
- @(113.6914 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.0314 mm, 111.6629 mm): Line on F.Silkscreen
- @(113.6914 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 113.2629 mm): Line on F.Silkscreen
- @(112.4214 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 113.2629 mm): Line on F.Silkscreen
- @(113.6914 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 113.2629 mm): Line on F.Silkscreen
- @(106.0714 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(112.4814 mm, 113.2629 mm): Line on F.Silkscreen
- @(107.3414 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 115.0629 mm): Line on F.Silkscreen
- @(112.4214 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(114.2314 mm, 115.0629 mm): Line on F.Silkscreen
- @(107.3414 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(109.3680 mm, 109.3368 mm): Arc on F.Silkscreen
- @(106.0714 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(105.7114 mm, 113.2629 mm): Line on F.Silkscreen
- @(106.0714 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(105.7114 mm, 113.2629 mm): Line on F.Silkscreen
- @(107.3414 mm, 113.5429 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(104.5814 mm, 110.0629 mm): Line on F.Silkscreen
- @(106.0714 mm, 111.0029 mm): Through hole pad [] of SW13
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.7314 mm, 120.4634 mm): Line on F.Silkscreen
- @(94.6414 mm, 117.0034 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.7314 mm, 120.4634 mm): Line on F.Silkscreen
- @(93.3714 mm, 119.5434 mm): Through hole pad [] of SW12
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.7314 mm, 101.4134 mm): Line on F.Silkscreen
- @(94.6414 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(94.7314 mm, 101.4134 mm): Line on F.Silkscreen
- @(93.3714 mm, 100.4934 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(95.1814 mm, 98.4134 mm): Line on F.Silkscreen
- @(94.6414 mm, 97.9534 mm): Through hole pad [] of SW7
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(124.7614 mm, 81.6629 mm): Line on F.Silkscreen
- @(126.3914 mm, 81.9429 mm): Through hole pad [] of SW4
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(124.7614 mm, 81.6629 mm): Line on F.Silkscreen
- @(125.1214 mm, 79.4029 mm): Through hole pad [] of SW4
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(123.6314 mm, 78.4629 mm): Line on F.Silkscreen
- @(125.1214 mm, 79.4029 mm): Through hole pad [] of SW4
-[silk_over_copper]: Silkscreen clipped by solder mask
- Rule: board setup constraints silk; Severity: warning
- @(123.4814 mm, 78.1629 mm): Line on F.Silkscreen
- @(125.1214 mm, 79.4029 mm): Through hole pad [