Combines a Wemos D1 Mini and a Z-0001 module with CC2531 CC.
Uses the Zigbee2Tasmota firmware to operate as a Zigbee Coordinator.
Features:
- ESP8266 to run Zigbee2Tasmota
- CC2531 Zigbee interface
- 3D-printable case
More information is available at:
The "Hardware" directory contains the PCB design as an EAGLE project. EAGLE PCB design software is available from Autodesk free for non-commercial use.
The "Firmware" directory contains example firmware as an Arduino project.
The "Enclosure" directory contains STLs for a case that can be 3D-printed.
The two halves of the case should be printed with the flat face down to the printer bed.
The case can be held shut by 8mm M3 bolts.
- Jonathan Oxer [email protected]
Copyright 2020 SuperHouse Automation Pty Ltd www.superhouse.tv
The hardware portion of this project is licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository contains a copy of this license in plain text format.
The software portion of this project is licensed under the Simplified BSD License. The "licence" folder within this project contains a copy of this license in plain text format.