Skip to content

Toy Options List

Jump to bottom
Sutekh edited this page Feb 4, 2024 · 26 revisions

Toy Options

OSC Data

Enable or disable toy information to VRChat. At the moment the only information sent with this option is the toy's battery life. Click the clipboard to copy the parameter to use on your avatar. VibeCheck will send the associated data to their respective endpoints.

The OSC data parameters are created based on the toy's name and how many of that same toy are connected.

  • toy_name is the name of the toy lowercase and spaces replaced with underscores.
  • toy_duplicate_id is how you use two of the same toy with different endpoints. If there is only one of a certain toy connected the duplicate id is always 0. The count starts at 0.

vibecheck/osc_data/{toy_name}/{toy_duplicate_id}/battery

Anatomy

Assign the anatomy tag to the specific toy. This is helpful for users or prefabs/tools that use the VibeCheck OSC API to disable/enable toys based on their anatomy tag. For example: if you have multiple DPS/TPS points that toggle on and off, you can use this tag to enable all toys tagged with Vagina and disable all toys with Anus etc.

Toy Feature Options

Enabled

Enable or disable the specific feature.

Processor

The toy feature's specified input processor. These are usually going to be "systems" created for VRChat avatars. The left drop down is for choosing the input processor, the right drop down is for the associated processing mode for the input processor. For example if you use the TPS input processor (Left) mode and select Smooth for the mode processor (Right) the motor's level will be a smoothed TPS input.

Supported Input Processors

  • None: Do not use an input processor.
  • TPS: Process TPS parameters.
  • SPS: Process SPS parameters. (The VibeCheck SPS implementation is based on the creator of SPS's app OGB's algorithm).
Parameter

The OSC parameter to control the feature. This parameter must be a float.

Mode

The processing mode. Input processors and parameters can each have an assigned mode processor. At the moment each toy's feature only has one "mode level" value that can be set, which applies to the whole feature. For example if you have two parameters assigned to a feature and they are both using smooth mode, they will both use the same smoothing level.

Supported Mode Processors

  • None: Set the motor to the input value directly.
  • Smooth: Queue the set amount of values and then set the toy motor to the average of them. (Recommend 2 for the smoothing value)
  • Rate: The faster the float input moves the higher the value to the toy motor. The lower the number the more sensitive the rate mode is to movement, the higher the number the less sensitive it is to movement.
  • Constant: Set the feature motor to the constant level specified by the user. Constant mode is ideal to use with Boolean parameters. If the boolean is true it will set the motor speed, if it is false it will stop the motor. Constant mode does work with float inputs as well. If the float is 0.5 or above it will set the motor speed. If it is below 0.5 it will stop the motor.
Linear Speed Set the requested linear position movement speed in milliseconds.

This feature will only show on Linear feature types.

Flip Input

This toggle flips float inputs after processing. This is helpful for toys that use a flipped motor input (0 == 100% && 100 == 0%).

Idle

The idle value will activate after the first activation of the feature. Set the idle power for a feature. Idle will activate when an input value is not being sent.

Range

Set the minimum and maximum input values.

Simulate

Simulate a value input with the given settings. This will activate the idle value as well!

Clone this wiki locally