This is the first part of the new chapter of the linux insides book and as you may guess by part's name - this part will cover control groups or cgroups mechanism in the Linux kernel.
Cgroups are special mechanism provided by the Linux kernel which allows us to allocate kind of resources like processor time, number of processes per group, amount of memory per control group or combination of such resources for a process or set of processes. Cgroups are organized hierarchically and here this mechanism is similar to usual processes as they are hierarchical too and child cgroups inherit set of certain parameters from their parents. But actually they are not the same. The main differences between cgroups and normal processes that many different hierarchies of control groups may exist simultaneously in one time while normal process tree is always single. This was not a casual step because each control group hierarchy is attached to set of control group subsystems.
One control group subsystem represents one kind of resources like a processor time or number of pids or in other words number of processes for a control group. Linux kernel provides support for following twelve control group subsystems:
cpuset- assigns individual processor(s) and memory nodes to task(s) in a group;cpu- uses the scheduler to provide cgroup tasks access to the processor resources;cpuacct- generates reports about processor usage by a group;io- sets limit to read/write from/to block devices;memory- sets limit on memory usage by a task(s) from a group;devices- allows access to devices by a task(s) from a group;freezer- allows to suspend/resume for a task(s) from a group;net_cls- allows to mark network packets from task(s) from a group;net_prio- provides a way to dynamically set the priority of network traffic per network interface for a group;perf_event- provides access to perf events to a group;hugetlb- activates support for huge pages for a group;pid- sets limit to number of processes in a group.
Each of these control group subsystems depends on related configuration option. For example the cpuset subsystem should be enabled via CONFIG_CPUSETS kernel configuration option, the io subsystem via CONFIG_BLK_CGROUP kernel configuration option and etc. All of these kernel configuration options may be found in the General setup → Control Group support menu:
You may see enabled control groups on your computer via proc filesystem:
$ cat /proc/cgroups
#subsys_name hierarchy num_cgroups enabled
cpuset 8 1 1
cpu 7 66 1
cpuacct 7 66 1
blkio 11 66 1
memory 9 94 1
devices 6 66 1
freezer 2 1 1
net_cls 4 1 1
perf_event 3 1 1
net_prio 4 1 1
hugetlb 10 1 1
pids 5 69 1
or via sysfs:
$ ls -l /sys/fs/cgroup/
total 0
dr-xr-xr-x 5 root root 0 Dec 2 22:37 blkio
lrwxrwxrwx 1 root root 11 Dec 2 22:37 cpu -> cpu,cpuacct
lrwxrwxrwx 1 root root 11 Dec 2 22:37 cpuacct -> cpu,cpuacct
dr-xr-xr-x 5 root root 0 Dec 2 22:37 cpu,cpuacct
dr-xr-xr-x 2 root root 0 Dec 2 22:37 cpuset
dr-xr-xr-x 5 root root 0 Dec 2 22:37 devices
dr-xr-xr-x 2 root root 0 Dec 2 22:37 freezer
dr-xr-xr-x 2 root root 0 Dec 2 22:37 hugetlb
dr-xr-xr-x 5 root root 0 Dec 2 22:37 memory
lrwxrwxrwx 1 root root 16 Dec 2 22:37 net_cls -> net_cls,net_prio
dr-xr-xr-x 2 root root 0 Dec 2 22:37 net_cls,net_prio
lrwxrwxrwx 1 root root 16 Dec 2 22:37 net_prio -> net_cls,net_prio
dr-xr-xr-x 2 root root 0 Dec 2 22:37 perf_event
dr-xr-xr-x 5 root root 0 Dec 2 22:37 pids
dr-xr-xr-x 5 root root 0 Dec 2 22:37 systemd
As you already may guess that control groups mechanism is not such mechanism which was invented only directly to the needs of the Linux kernel, but mostly for userspace needs. To use a control group, we should create it at first. We may create a cgroup via two ways.
The first way is to create subdirectory in any subsystem from /sys/fs/cgroup and add a pid of a task to a tasks file which will be created automatically right after we will create the subdirectory.
The second way is to create/destroy/manage cgroups with utils from libcgroup library (libcgroup-tools in Fedora).
Let's consider simple example. Following bash script will print a line to /dev/tty device which represents control terminal for the current process:
#!/bin/bash
while :
do
echo "print line" > /dev/tty
sleep 5
doneSo, if we will run this script we will see following result:
$ sudo chmod +x cgroup_test_script.sh
~$ ./cgroup_test_script.sh
print line
print line
print line
...
...
...
Now let's go to the place where cgroupfs is mounted on our computer. As we just saw, this is /sys/fs/cgroup directory, but you may mount it everywhere you want.
$ cd /sys/fs/cgroup
And now let's go to the devices subdirectory which represents kind of resources that allows or denies access to devices by tasks in a cgroup:
# cd devices
and create cgroup_test_group directory there:
# mkdir cgroup_test_group
After creation of the cgroup_test_group directory, following files will be generated there:
/sys/fs/cgroup/devices/cgroup_test_group$ ls -l
total 0
-rw-r--r-- 1 root root 0 Dec 3 22:55 cgroup.clone_children
-rw-r--r-- 1 root root 0 Dec 3 22:55 cgroup.procs
--w------- 1 root root 0 Dec 3 22:55 devices.allow
--w------- 1 root root 0 Dec 3 22:55 devices.deny
-r--r--r-- 1 root root 0 Dec 3 22:55 devices.list
-rw-r--r-- 1 root root 0 Dec 3 22:55 notify_on_release
-rw-r--r-- 1 root root 0 Dec 3 22:55 tasks
For this moment we are interested in tasks and devices.deny files. The first tasks files should contain pid(s) of processes which will be attached to the cgroup_test_group. The second devices.deny file contain list of denied devices. By default a newly created group has no any limits for devices access. To forbid a device (in our case it is /dev/tty) we should write to the devices.deny following line:
# echo "c 5:0 w" > devices.deny
Let's go step by step through this line. The first c letter represents type of a device. In our case the /dev/tty is char device. We can verify this from output of ls command:
~$ ls -l /dev/tty
crw-rw-rw- 1 root tty 5, 0 Dec 3 22:48 /dev/tty
see the first c letter in a permissions list. The second part is 5:0 is major and minor numbers of the device. You can see these numbers in the output of ls too. And the last w letter forbids tasks to write to the specified device. So let's start the cgroup_test_script.sh script:
~$ ./cgroup_test_script.sh
print line
print line
print line
...
...
and add pid of this process to the devices/tasks file of our group:
# echo $(pidof -x cgroup_test_script.sh) > /sys/fs/cgroup/devices/cgroup_test_group/tasks
The result of this action will be as expected:
~$ ./cgroup_test_script.sh
print line
print line
print line
print line
print line
print line
./cgroup_test_script.sh: line 5: /dev/tty: Operation not permitted
Similar situation will be when you will run you docker containers for example:
~$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
fa2d2085cd1c mariadb:10 "docker-entrypoint..." 12 days ago Up 4 minutes 0.0.0.0:3306->3306/tcp mysql-work
~$ cat /sys/fs/cgroup/devices/docker/fa2d2085cd1c8d797002c77387d2061f56fefb470892f140d0dc511bd4d9bb61/tasks | head -3
5501
5584
5585
...
...
...
So, during startup of a docker container, docker will create a cgroup for processes in this container:
$ docker exec -it mysql-work /bin/bash
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 mysql 20 0 963996 101268 15744 S 0.0 0.6 0:00.46 mysqld
71 root 20 0 20248 3028 2732 S 0.0 0.0 0:00.01 bash
77 root 20 0 21948 2424 2056 R 0.0 0.0 0:00.00 top
And we may see this cgroup on host machine:
$ systemd-cgls
Control group /:
-.slice
├─docker
│ └─fa2d2085cd1c8d797002c77387d2061f56fefb470892f140d0dc511bd4d9bb61
│ ├─5501 mysqld
│ └─6404 /bin/bashNow we know a little about control groups mechanism, how to use it manually and what's purpose of this mechanism. It's time to look inside of the Linux kernel source code and start to dive into implementation of this mechanism.
Now after we just saw little theory about control groups Linux kernel mechanism, we may start to dive into the source code of Linux kernel to acquainted with this mechanism closer. As always we will start from the initialization of control groups. Initialization of cgroups divided into two parts in the Linux kernel: early and late. In this part we will consider only early part and late part will be considered in next parts.
Early initialization of cgroups starts from the call of the:
cgroup_init_early();function in the init/main.c during early initialization of the Linux kernel. This function is defined in the kernel/cgroup.c source code file and starts from the definition of two following local variables:
int __init cgroup_init_early(void)
{
static struct cgroup_sb_opts __initdata opts;
struct cgroup_subsys *ss;
...
...
...
}The cgroup_sb_opts structure defined in the same source code file and looks:
struct cgroup_sb_opts {
u16 subsys_mask;
unsigned int flags;
char *release_agent;
bool cpuset_clone_children;
char *name;
bool none;
};which represents mount options of cgroupfs. For example we may create named cgroup hierarchy (with name my_cgrp) with the name= option and without any subsystems:
$ mount -t cgroup -oname=my_cgrp,none /mnt/cgroups
The second variable - ss has type - cgroup_subsys structure which is defined in the include/linux/cgroup-defs.h header file and as you may guess from the name of the type, it represents a cgroup subsystem. This structure contains various fields and callback functions like:
struct cgroup_subsys {
int (*css_online)(struct cgroup_subsys_state *css);
void (*css_offline)(struct cgroup_subsys_state *css);
...
...
...
bool early_init:1;
int id;
const char *name;
struct cgroup_root *root;
...
...
...
}Where for example css_online and css_offline callbacks are called after a cgroup successfully will complete all allocations and a cgroup will be before releasing respectively. The early_init flags marks subsystems which may/should be initialized early. The id and name fields represents unique identifier in the array of registered subsystems for a cgroup and name of a subsystem respectively. The last - root fields represents pointer to the root of of a cgroup hierarchy.
Of course the cgroup_subsys structure is bigger and has other fields, but it is enough for now. Now as we got to know important structures related to cgroups mechanism, let's return to the cgroup_init_early function. Main purpose of this function is to do early initialization of some subsystems. As you already may guess, these early subsystems should have cgroup_subsys->early_init = 1. Let's look what subsystems may be initialized early.
After the definition of the two local variables we may see following lines of code:
init_cgroup_root(&cgrp_dfl_root, &opts);
cgrp_dfl_root.cgrp.self.flags |= CSS_NO_REF;Here we may see call of the init_cgroup_root function which will execute initialization of the default unified hierarchy and after this we set CSS_NO_REF flag in state of this default cgroup to disable reference counting for this css. The cgrp_dfl_root is defined in the same source code file:
struct cgroup_root cgrp_dfl_root;Its cgrp field represented by the cgroup structure which represents a cgroup as you already may guess and defined in the include/linux/cgroup-defs.h header file. We already know that a process which is represented by the task_struct in the Linux kernel. The task_struct does not contain direct link to a cgroup where this task is attached. But it may be reached via css_set field of the task_struct. This css_set structure holds pointer to the array of subsystem states:
struct css_set {
...
...
....
struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
...
...
...
}And via the cgroup_subsys_state, a process may get a cgroup that this process is attached to:
struct cgroup_subsys_state {
...
...
...
struct cgroup *cgroup;
...
...
...
}So, the overall picture of cgroups related data structure is following:
+-------------+ +---------------------+ +------------->+---------------------+ +----------------+
| task_struct | | css_set | | | cgroup_subsys_state | | cgroup |
+-------------+ | | | +---------------------+ +----------------+
| | | | | | | | flags |
| | | | | +---------------------+ | cgroup.procs |
| | | | | | cgroup |--------->| id |
| | | | | +---------------------+ | .... |
|-------------+ |---------------------+----+ +----------------+
| cgroups | ------> | cgroup_subsys_state | array of cgroup_subsys_state
|-------------+ +---------------------+------------------>+---------------------+ +----------------+
| | | | | cgroup_subsys_state | | cgroup |
+-------------+ +---------------------+ +---------------------+ +----------------+
| | | flags |
+---------------------+ | cgroup.procs |
| cgroup |--------->| id |
+---------------------+ | .... |
| cgroup_subsys | +----------------+
+---------------------+
|
|
↓
+---------------------+
| cgroup_subsys |
+---------------------+
| id |
| name |
| css_online |
| css_ofline |
| attach |
| .... |
+---------------------+
So, the init_cgroup_root fills the cgrp_dfl_root with the default values. The next thing is assigning initial css_set to the init_task which represents first process in the system:
RCU_INIT_POINTER(init_task.cgroups, &init_css_set);And the last big thing in the cgroup_init_early function is initialization of early cgroups. Here we go over all registered subsystems and assign unique identity number, name of a subsystem and call the cgroup_init_subsys function for subsystems which are marked as early:
for_each_subsys(ss, i) {
ss->id = i;
ss->name = cgroup_subsys_name[i];
if (ss->early_init)
cgroup_init_subsys(ss, true);
}The for_each_subsys here is a macro which is defined in the kernel/cgroup.c source code file and just expands to the for loop over cgroup_subsys array. Definition of this array may be found in the same source code file and it looks in a little unusual way:
#define SUBSYS(_x) [_x ## _cgrp_id] = &_x ## _cgrp_subsys,
static struct cgroup_subsys *cgroup_subsys[] = {
#include <linux/cgroup_subsys.h>
};
#undef SUBSYSIt is defined as SUBSYS macro which takes one argument (name of a subsystem) and defines cgroup_subsys array of cgroup subsystems. Additionally we may see that the array is initialized with content of the linux/cgroup_subsys.h header file. If we will look inside of this header file we will see again set of the SUBSYS macros with the given subsystems names:
#if IS_ENABLED(CONFIG_CPUSETS)
SUBSYS(cpuset)
#endif
#if IS_ENABLED(CONFIG_CGROUP_SCHED)
SUBSYS(cpu)
#endif
...
...
...This works because of #undef statement after first definition of the SUBSYS macro. Look at the &_x ## _cgrp_subsys expression. The ## operator concatenates right and left expression in a C macro. So as we passed cpuset, cpu and etc., to the SUBSYS macro, somewhere cpuset_cgrp_subsys, cp_cgrp_subsys should be defined. And that's true. If you will look in the kernel/cpuset.c source code file, you will see this definition:
struct cgroup_subsys cpuset_cgrp_subsys = {
...
...
...
.early_init = true,
};So the last step in the cgroup_init_early function is initialization of early subsystems with the call of the cgroup_init_subsys function. Following early subsystems will be initialized:
cpuset;cpu;cpuacct.
The cgroup_init_subsys function does initialization of the given subsystem with the default values. For example sets root of hierarchy, allocates space for the given subsystem with the call of the css_alloc callback function, link a subsystem with a parent if it exists, add allocated subsystem to the initial process and etc.
That's all. From this moment early subsystems are initialized.
It is the end of the first part which describes introduction into Control groups mechanism in the Linux kernel. We covered some theory and the first steps of initialization of stuffs related to control groups mechanism. In the next part we will continue to dive into the more practical aspects of control groups.
If you have any questions or suggestions write me a comment or ping me at twitter.
Please note that English is not my first language, And I am really sorry for any inconvenience. If you find any mistakes please send me a PR to linux-insides.