ESP-LED - the ultimate LED-Strip-Controller-Board!

What can it do?

• Controle RGB-LED strip (12V Mode)
• Controle RGBWW-LED strips (12V Mode)
• Controle WW LED-Strips (12V Mode)
• Controle WS2812 individually adressable LED Strips (5V Mode)
• Controle APA102 individually adressable LED Strips (5V Mode)
• Communicate over WiFi + MQTT
• Measure surrounding Temperature
• Sound-2-Light trough integrated Microphone

How does it look like?

How does the Pinning look like?

How to use it?

How to use it in 12V Mode with RGBWW

Hardware:

• You only need to insert as many MOSFETS (IRLZ34N) as you want to controle Channels. Bridge the jumpers according to the table below

Software:

• Boot into configuration mode (see software README) and change the "LED Type" to "RGB", "RGBW" or "RGBWW" for 3, 4 or 5 active channels.

How to use it in 5V Mode with WS2812

Hardware:

• Just bridge the Jumpers according to the table below.

Software:

• Boot into configuration mode (see software README) and change the "LED Type" to "WS2812".

How to use it in 5V Mode with APA102

Hardware:

• Just bridge the Jumpers according to the table below.

Software:

• Boot into configuration mode (see software README) and change the "LED Type" to "APA102".

What controle the Jumpers?

Jumpernumber	Connects-Between	Function
1	Q1 Signal - Q1 Out	WS2812, APA102
2	Q2 Signal - Q2 Out	APA102
3	Q3 Signal - Q3 Out
4	Q4 Signal - Q4 Out
5	Q5 Signal - Q5 Out
6	IO13 - Q1	RGB, RGBW, RGBWW
7	IO12 - Q2	RGB, RGBW, RGBWW
8	IO14 - Q3	RGB, RGBW, RGBWW
9	IO16 - Q4	RGBW, RGBWW
10	IO5 - Q5	RGBWW

Which parts do I need?

See the Bill-Of-Materials file named ESPLED.csv in the hardware folder.

Supported Modes

See Wiki (https://github.com/Yottabits/espled/wiki/Modes-Description)

nice Projects with led animations for insperation

• GoodListOfAnimations for individually addressable strips: https://www.tweaking4all.com/hardware/arduino/arduino-all-ledstrip-effects-in-one/
• https://github.com/Aircoookie/WLED/wiki