Modes Description

Modes an mqtt

0 fade2Color

Description:

This is the most basic mode to change the strips color. You send the color a transition time. A transition time of 0 leads to an instant color jump.

Parameters:

Parameter	Effect	Unit	min.	man.
mode	changes Mode	int	0	0
color	defines color in an Red-Green-Blue-WarmWhite-ColdWhite array	PWM	0	1023
time	time until the end color is reached	milliseconds	0	4294967295 ~ 49.7d

Example JSON:

{
  "mode":0,
  "color":[
      1023,
      1023,
      1023,
      1023,
      1023
  ],
  "time":1000
}

1 blinkColor

Description:

This mode should be used for notifictaion. The Controller will store it's current state and blink in the selected color. You may select a number of blinks with the length parameter.

Parameters:

Parameter	Effect	Unit	min.	man.
mode	changes Mode	int	1	1
color	defines color in an Red-Green-Blue-WarmWhite-ColdWhite array	PWM	0	1023
duration	duration of each max and min period	milliseconds	0	4294967295 ~ 49.7d
length	number of blinks	int	0	?
time	fadeTime from 0 to 1023	0	4294967295 ~ 49.7d

Example JSON:

{
  "mode":1,
  "color":[
      1023,
      0,
      0,
      0,
      0
  ],
  "time":2000,
  "legth":3,
  "duration":1000
}

2 strobe

Description:

This mode lights up the strip in the selected color and blinks it on/off in the selected frequency - no fading.

Parameters:

Parameter	Effect	Unit	min.	man.
mode	changes Mode	t	2	2
color	defines color in an Red-Green-Blue-WarmWhite-ColdWhite array	PWM	0	1023
frequency	changes the strobe frequency	Hz	1	60

Example JSON:

{
  "mode":2,
  "color":[
      800,
      120,
      1023,
      0,
      0
  ],
  "frequency":20
}

3 sound2Light

4 breathe

Description:

This mode realizes a breathing function. This means the whole strip gets dimmed up and down. You can add some randomness to that through timeVariance and maxBrightnessVariance.

Parameters:

Parameter	Effect	Unit	min.	man.
mode	changes Mode	t	4	4
color	defines color in an Red-Green-Blue-WarmWhite-ColdWhite array	PWM	0	1023
time	Period of whole "breath" (effected by time Variance)	milliseconds	0	4294967295 ~ 49.7d
minBrightnes	minimum Brightness	PWM	0	1023
maxBrightnes	maximum Brightness (effected by maxBrightnesVariance)	PWM	0	1023
timeVariance	if set each breath a random amount of ms within the Interval [-timeVariance <> +timeVariance] gets added to the breath time	millisceonds	0	4294967295 ~ 49.7d
maxBrightnesVariance	if set each breath a random amount of brightnes within the Interval [-maxBrightnesVariance <> +maxBrightnesVariance] gets added to maxBrightnes	PWM	0	1023

Example JSON:

{
  "mode":4,
  "color":[
      1023,
      0,
      0,
      0,
      0
  ],
  "time":6000,
  "minBrightnes":0,
  "maxBrightnes":1023,
  "timeVariance":3000,
  "maxBrightnesVariance":500
}