mbed_lib.json

{
    "name": "bg96-library",
    "config": {
        "bg96-debug": {
            "help" : "enable or disable BG96 debug messages.",
            "value": "true"
        },
        "bg96-debug_setting": {
            "help" : "bit value 1 and/or 2 enable debug output, bit value 4 enables mbed driver debug output. Use 0x84 to turn on. Use 0x0 to turn off",
            "value": "0x00"
        },
        "bg96-tx": {
            "help": "TX pin for serial connection to BG96 on the NUCLEO Board",
            "value": "D8"
        },
        "bg96-rx": {
            "help": "RX pin for serial connection to BG96 on the NUCLEO Board",
            "value": "D2"
        },
        "bg96-reset": {
            "help": "BG96 Reset pin",
            "value": "D7"
        },
        "bg96-wake": {
            "help": "BG96 Wake pin",
            "value": "D11"
        },
        "bg96-pwrkey": {
            "help": "BG96 PWRKEY pin",
            "value": "D10"
        },
        "bg96-gnss-outport": {
            "help": "BG96 port to which NMEA phrases will be output. Options are none, usbnmea, uartnmea",
            "value": "usbnmea"
        },
        "bg96-gnss-nmeasrc": {
            "help": "Allow/disable Acquisition of NMEA sentences via AT+QGPSNMEA. Value O or 1.",
            "value": 1
        },
        "bg96-gnss-gpsnmeatype": {
            "help": "GPS NMEA Sentence type - (0-Disable, 1-GGA, 2-RMC, 4-GSV, 8-GSA, 16-VTG).",
            "value": 8
        },
        "bg96-gnss-glonassnmeatype": {
            "help": "GLONASS NMEA Sentence type - (0-Disable, 1-GSV, 2-GSA, 4-GNS).",
            "value": 0
        },
        "bg96-gnss-galileonmeatype": {
            "help": "GALILEO NMEA Sentence type - (0-Disable, 1-GSV).",
            "value": 0
        },
        "bg96-gnss-beidounmeatype": {
            "help": "BEIDOU NMEA Sentence type - (0-Disable, 1-GSA, 2-GSV).",
            "value": 0
        },
        "bg96-gnss-gsvextnmeatype": {
            "help": "Use extended GSV NMEA Type - (0-Disable, 1-Enable).",
            "value": 0
        },
        "bg96-gnss-gnssconfig": {
            "help": "Glonass/BeiDou/Galileo selection (see GNNS AT Commands Manual",
            "value": 1
        },
        "bg96-gnss-autogps": {
            "help": "Enable/Disable GNSS to Run Automatically (0-Disabled, 1-Enabled)",
            "value": 0
        }
    },
    "target_overrides": {
         "K64F": {
             "bg96-tx": "D1",
             "bg96-rx": "D0"
         },
         "NUCLEO_L496ZG": {
             "bg96-tx": "D1",
             "bg96-rx": "D0",
             "bg96-pwrkey": "D10",
             "bg96-reset": "D7",
             "bg96-wake": "D11"
         },
         "NUCLEO_L476RG": {
            "bg96-tx": "PA_9",
            "bg96-rx": "PA_10",
            "bg96-reset": "PA_8",
            "bg96-wake": "PA_7",
            "bg96-pwrkey": "PB_6"
         }
    }
}