Skip to content

Latest commit

 

History

History
288 lines (269 loc) · 10.5 KB

README_TRAIN_LORA.md

File metadata and controls

288 lines (269 loc) · 10.5 KB
Raw

Lora Training Code

The default training commands for the different versions are as follows:

We can choose whether to use deep speed in EasyAnimate, which can save a lot of video memory.

Some parameters in the sh file can be confusing, and they are explained in this document:

  • enable_bucket is used to enable bucket training. When enabled, the model does not crop the images and videos at the center, but instead, it trains the entire images and videos after grouping them into buckets based on resolution.
  • random_frame_crop is used for random cropping on video frames to simulate videos with different frame counts.
  • random_hw_adapt is used to enable automatic height and width scaling for images and videos. When random_hw_adapt is enabled, the training images will have their height and width set to image_sample_size as the maximum and video_sample_size as the minimum. For training videos, the height and width will be set to video_sample_size as the maximum and min(video_sample_size, 512) as the minimum.
  • training_with_video_token_length specifies training the model according to token length. The token length for a video with dimensions 512x512 and 49 frames is 13,312.
    • At 512x512 resolution, the number of video frames is 49;
    • At 768x768 resolution, the number of video frames is 21;
    • At 1024x1024 resolution, the number of video frames is 9;
    • These resolutions combined with their corresponding lengths allow the model to generate videos of different sizes.
  • train_mode is used to specify the training mode, which can be either normal or inpaint. Since EasyAnimate uses the Inpaint model to achieve image-to-video generation, the default is set to inpaint mode. If you only wish to achieve text-to-video generation, you can remove this line, and it will default to the text-to-video mode.
  • uniform_sampling is used to ensure that each batch can be uniformly sampled from 0 to 1000.
  • The default parameter for training is the Inpaint model. If you only want to train the T2V model, please set train_made="normal" and use the EasyAnimateV5-12b-zh model.

EasyAnimateV5-InP without deepspeed:

export MODEL_NAME="models/Diffusion_Transformer/EasyAnimateV5-12b-zh-InP"
export DATASET_NAME="datasets/internal_datasets/"
export DATASET_META_NAME="datasets/internal_datasets/metadata.json"
export NCCL_IB_DISABLE=1
export NCCL_P2P_DISABLE=1
NCCL_DEBUG=INFO

# When train model with multi machines, use "--config_file accelerate.yaml" instead of "--mixed_precision='bf16'".
accelerate launch --mixed_precision="bf16" scripts/train_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME \
  --train_data_dir=$DATASET_NAME \
  --train_data_meta=$DATASET_META_NAME \
  --config_path "config/easyanimate_video_v5_magvit_multi_text_encoder.yaml" \
  --image_sample_size=1024 \
  --video_sample_size=256 \
  --token_sample_size=512 \
  --video_sample_stride=3 \
  --video_sample_n_frames=49 \
  --train_batch_size=1 \
  --video_repeat=1 \
  --gradient_accumulation_steps=1 \
  --dataloader_num_workers=8 \
  --num_train_epochs=100 \
  --checkpointing_steps=100 \
  --learning_rate=1e-04 \
  --seed=42 \
  --low_vram \
  --output_dir="output_dir" \
  --gradient_checkpointing \
  --mixed_precision="bf16" \
  --adam_weight_decay=5e-3 \
  --adam_epsilon=1e-10 \
  --vae_mini_batch=1 \
  --max_grad_norm=0.05 \
  --random_hw_adapt \
  --training_with_video_token_length \
  --not_sigma_loss \
  --enable_bucket \
  --uniform_sampling \
  --train_mode="inpaint"

EasyAnimateV5 with deepspeed:

export MODEL_NAME="models/Diffusion_Transformer/EasyAnimateV5-12b-zh-InP"
export DATASET_NAME="datasets/internal_datasets/"
export DATASET_META_NAME="datasets/internal_datasets/metadata.json"
export NCCL_IB_DISABLE=1
export NCCL_P2P_DISABLE=1
NCCL_DEBUG=INFO

# When train model with multi machines, use "--config_file accelerate.yaml" instead of "--mixed_precision='bf16'".
accelerate launch --use_deepspeed --deepspeed_config_file config/zero_stage2_config.json --deepspeed_multinode_launcher standard scripts/train_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME \
  --train_data_dir=$DATASET_NAME \
  --train_data_meta=$DATASET_META_NAME \
  --config_path "config/easyanimate_video_v5_magvit_multi_text_encoder.yaml" \
  --image_sample_size=1024 \
  --video_sample_size=256 \
  --token_sample_size=512 \
  --video_sample_stride=3 \
  --video_sample_n_frames=49 \
  --train_batch_size=1 \
  --video_repeat=1 \
  --gradient_accumulation_steps=1 \
  --dataloader_num_workers=8 \
  --num_train_epochs=100 \
  --checkpointing_steps=100 \
  --learning_rate=1e-04 \
  --seed=42 \
  --low_vram \
  --output_dir="output_dir" \
  --gradient_checkpointing \
  --mixed_precision="bf16" \
  --adam_weight_decay=5e-3 \
  --adam_epsilon=1e-10 \
  --vae_mini_batch=1 \
  --max_grad_norm=0.05 \
  --random_hw_adapt \
  --training_with_video_token_length \
  --not_sigma_loss \
  --enable_bucket \
  --use_deepspeed \
  --uniform_sampling \
  --train_mode="inpaint"
(Obsolete) EasyAnimateV4:

EasyAnimateV4 without deepspeed:

export MODEL_NAME="models/Diffusion_Transformer/EasyAnimateV4-XL-2-InP"
export DATASET_NAME="datasets/internal_datasets/"
export DATASET_META_NAME="datasets/internal_datasets/metadata.json"
export NCCL_IB_DISABLE=1
export NCCL_P2P_DISABLE=1
NCCL_DEBUG=INFO

# When train model with multi machines, use "--config_file accelerate.yaml" instead of "--mixed_precision='bf16'".
accelerate launch --mixed_precision="bf16" scripts/train_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME \
  --train_data_dir=$DATASET_NAME \
  --train_data_meta=$DATASET_META_NAME \
  --config_path "config/easyanimate_video_v4_slicevae_multi_text_encoder.yaml" \
  --image_sample_size=512 \
  --video_sample_size=512 \
  --video_sample_stride=1 \
  --video_sample_n_frames=144 \
  --train_batch_size=1 \
  --video_repeat=1 \
  --gradient_accumulation_steps=1 \
  --dataloader_num_workers=4 \
  --num_train_epochs=100 \
  --checkpointing_steps=100 \
  --learning_rate=1e-04 \
  --seed=42 \
  --low_vram \
  --output_dir="output_dir" \
  --enable_xformers_memory_efficient_attention \
  --gradient_checkpointing \
  --mixed_precision="bf16" \
  --adam_weight_decay=3e-2 \
  --adam_epsilon=1e-10 \
  --vae_mini_batch=1 \
  --max_grad_norm=0.05 \
  --random_hw_adapt \
  --motion_sub_loss \
  --not_sigma_loss \
  --enable_bucket \
  --train_mode="inpaint" \
  --random_frame_crop

EasyAnimateV4 with deepspeed:

export MODEL_NAME="models/Diffusion_Transformer/EasyAnimateV4-XL-2-InP"
export DATASET_NAME="datasets/internal_datasets/"
export DATASET_META_NAME="datasets/internal_datasets/metadata.json"
export NCCL_IB_DISABLE=1
export NCCL_P2P_DISABLE=1
NCCL_DEBUG=INFO

# When train model with multi machines, use "--config_file accelerate.yaml" instead of "--mixed_precision='bf16'".
accelerate launch --use_deepspeed --deepspeed_config_file config/zero_stage2_config.json --deepspeed_multinode_launcher standard scripts/train_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME \
  --train_data_dir=$DATASET_NAME \
  --train_data_meta=$DATASET_META_NAME \
  --config_path "config/easyanimate_video_v4_slicevae_multi_text_encoder.yaml" \
  --image_sample_size=512 \
  --video_sample_size=512 \
  --video_sample_stride=1 \
  --video_sample_n_frames=144 \
  --train_batch_size=1 \
  --video_repeat=1 \
  --gradient_accumulation_steps=1 \
  --dataloader_num_workers=4 \
  --num_train_epochs=100 \
  --checkpointing_steps=100 \
  --learning_rate=1e-04 \
  --seed=42 \
  --low_vram \
  --output_dir="output_dir" \
  --enable_xformers_memory_efficient_attention \
  --gradient_checkpointing \
  --mixed_precision="bf16" \
  --adam_weight_decay=3e-2 \
  --adam_epsilon=1e-10 \
  --vae_mini_batch=1 \
  --max_grad_norm=0.05 \
  --random_hw_adapt \
  --motion_sub_loss \
  --not_sigma_loss \
  --enable_bucket \
  --use_deepspeed \
  --train_mode="inpaint" \
  --random_frame_crop
(Obsolete) EasyAnimateV3: 
export MODEL_NAME="models/Diffusion_Transformer/EasyAnimateV3-XL-2-InP-512x512"
export DATASET_NAME="datasets/internal_datasets/"
export DATASET_META_NAME="datasets/internal_datasets/metadata.json"
export NCCL_IB_DISABLE=1
export NCCL_P2P_DISABLE=1
NCCL_DEBUG=INFO

# When train model with multi machines, use "--config_file accelerate.yaml" instead of "--mixed_precision='bf16'".
accelerate launch --mixed_precision="bf16" scripts/train_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME \
  --train_data_dir=$DATASET_NAME \
  --train_data_meta=$DATASET_META_NAME \
  --config_path "config/easyanimate_video_v3_slicevae_motion_module.yaml" \
  --image_sample_size=512 \
  --video_sample_size=512 \
  --video_sample_stride=1 \
  --video_sample_n_frames=144 \
  --train_batch_size=1 \
  --video_repeat=1 \
  --gradient_accumulation_steps=1 \
  --dataloader_num_workers=4 \
  --num_train_epochs=100 \
  --checkpointing_steps=100 \
  --learning_rate=1e-04 \
  --seed=42 \
  --low_vram \
  --output_dir="output_dir" \
  --enable_xformers_memory_efficient_attention \
  --gradient_checkpointing \
  --mixed_precision="bf16" \
  --adam_weight_decay=3e-2 \
  --adam_epsilon=1e-10 \
  --max_grad_norm=1 \
  --vae_mini_batch=1 \
  --enable_bucket \
  --train_mode="inpaint" \
  --random_frame_crop
(Obsolete) EasyAnimateV2: 
export MODEL_NAME="models/Diffusion_Transformer/EasyAnimateV2-XL-2-512x512"
export DATASET_NAME="datasets/internal_datasets/"
export DATASET_META_NAME="datasets/internal_datasets/metadata.json"
export NCCL_IB_DISABLE=1
export NCCL_P2P_DISABLE=1
NCCL_DEBUG=INFO

# When train model with multi machines, use "--config_file accelerate.yaml" instead of "--mixed_precision='bf16'".
accelerate launch --mixed_precision="bf16" scripts/train_t2iv_lora.py \
  --pretrained_model_name_or_path=$MODEL_NAME \
  --train_data_dir=$DATASET_NAME \
  --train_data_meta=$DATASET_META_NAME \
  --config_path "config/easyanimate_video_v2_magvit_motion_module.yaml" \
  --image_sample_size=512 \
  --video_sample_size=512 \
  --video_sample_stride=1 \
  --video_sample_n_frames=144 \
  --train_batch_size=1 \
  --video_repeat=1 \
  --gradient_accumulation_steps=1 \
  --dataloader_num_workers=4 \
  --num_train_epochs=100 \
  --checkpointing_steps=100 \
  --learning_rate=1e-04 \
  --seed=42 \
  --low_vram \
  --output_dir="output_dir" \
  --enable_xformers_memory_efficient_attention \
  --gradient_checkpointing \
  --mixed_precision="bf16" \
  --adam_weight_decay=3e-2 \
  --adam_epsilon=1e-10 \
  --max_grad_norm=1 \
  --vae_mini_batch=1 \
  --enable_bucket \
  --random_frame_crop