MM status received with cause(?) problem changing sst value

[Alessia1998]

Hi guys!
I have a problem with Open5gs and UERANSIM, i can setup PDU session for user with sst:1, but when I try to register a new subrscriber with sst:2 or others in the webui and changing the ue.yaml file, I face off this problem and this error, I try to change many configurations but nothing works. I hope someone can help me.

This is my ue config file:

# IMSI number of the UE. IMSI = [MCC|MNC|MSISDN] (In total 15 digits)
supi: 'imsi-999700000000004'
# Mobile Country Code value of HPLMN
mcc: '999'
# Mobile Network Code value of HPLMN (2 or 3 digits)
mnc: '70'
# SUCI Protection Scheme : 0 for Null-scheme, 1 for Profile A and 2 for Profile B
protectionScheme: 0
# Home Network Public Key for protecting with SUCI Profile A
homeNetworkPublicKey: '5a8d38864820197c3394b92613b20b91633cbd897119273bf8e4a6f4eec0a650'
# Home Network Public Key ID for protecting with SUCI Profile A
homeNetworkPublicKeyId: 1
# Routing Indicator
routingIndicator: '0000'

# Permanent subscription key
key: '465B5CE8B199B49FAA5F0A2EE238A6BC'
# Operator code (OP or OPC) of the UE
op: 'E8ED289DEBA952E4283B54E88E6183CA'
# This value specifies the OP type and it can be either 'OP' or 'OPC'
opType: 'OPC'
# Authentication Management Field (AMF) value
amf: '8000'
# IMEI number of the device. It is used if no SUPI is provided
imei: '356938035643803'
# IMEISV number of the device. It is used if no SUPI and IMEI is provided
imeiSv: '4370816125816151'

# List of gNB IP addresses for Radio Link Simulation
gnbSearchList:
  - 10.10.2.7

# UAC Access Identities Configuration
uacAic:
  mps: false
  mcs: false

# UAC Access Control Class
uacAcc:
  normalClass: 0
  class11: false
  class12: false
  class13: false
  class14: false
  class15: false

# Initial PDU sessions to be established
sessions:
  - type: 'IPv4'
    apn: 'internet'
    slice:
      sst: 2

# Configured NSSAI for this UE by HPLMN
configured-nssai:
  - sst: 1

# Default Configured NSSAI for this UE
default-nssai:
  - sst: 1
    sd: 1

# Supported integrity algorithms by this UE
integrity:
  IA1: true
  IA2: true
  IA3: true

# Supported encryption algorithms by this UE
ciphering:
  EA1: true
  EA2: true
  EA3: true

# Integrity protection maximum data rate for user plane
integrityMaxRate:
  uplink: 'full'
  downlink: 'full'

this is my gnb config file:

mcc: '999'          # Mobile Country Code value
mnc: '70'           # Mobile Network Code value (2 or 3 digits)

nci: '0x000000010'  # NR Cell Identity (36-bit)
idLength: 32        # NR gNB ID length in bits [22...32]
tac: 1              # Tracking Area Code

linkIp: 10.10.2.7# gNB's local IP address for Radio Link Simulation (Usually same with local IP)
ngapIp: 10.10.2.7   # gNB's local IP address for N2 Interface (Usually same with local IP)
gtpIp: 10.10.2.7    # gNB's local IP address for N3 Interface (Usually same with local IP)

# List of AMF address information
amfConfigs:
  - address: 10.10.2.6
    port: 38412

# List of supported S-NSSAIs by this gNB
slices:
  - sst: 1

# Indicates whether or not SCTP stream number errors should be ignored.
ignoreStreamIds: true

this is the subrscriber configuration in webui :

Thank you.