mpconfigport.h

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2013-2017 Damien P. George
 * Copyright (c) 2021,2022 Renesas Electronics Corporation
 * Copyright (c) 2023 Vekatech Ltd.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

// Options to control how MicroPython is built for this port,
// overriding defaults in py/mpconfig.h.

// board specific definitions
#include "mpconfigboard.h"
#include "mpconfigboard_common.h"

#ifndef MICROPY_CONFIG_ROM_LEVEL
#define MICROPY_CONFIG_ROM_LEVEL (MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES)
#endif

#ifndef MICROPY_HW_ENABLE_USBDEV
#define MICROPY_HW_ENABLE_USBDEV    (0)
#endif
#ifndef MICROPY_HW_ENABLE_UART_REPL
#define MICROPY_HW_ENABLE_UART_REPL (1) // useful if there is no USB
#endif

#if MICROPY_HW_ENABLE_USBDEV
// Enable USB-CDC serial port
#ifndef MICROPY_HW_USB_CDC
#define MICROPY_HW_USB_CDC      (1)
#endif
// Enable USB Mass Storage with FatFS filesystem.
#ifndef MICROPY_HW_USB_MSC
#define MICROPY_HW_USB_MSC    (0)
#endif
// RA unique ID is 16 bytes (hex string == 32)
#ifndef MICROPY_HW_USB_DESC_STR_MAX
#define MICROPY_HW_USB_DESC_STR_MAX (32)
#endif
#endif

// memory allocation policies
#ifndef MICROPY_GC_STACK_ENTRY_TYPE
#if MICROPY_HW_SDRAM_SIZE
#define MICROPY_GC_STACK_ENTRY_TYPE uint32_t
#else
#define MICROPY_GC_STACK_ENTRY_TYPE uint16_t
#endif
#endif
#define MICROPY_ALLOC_PATH_MAX      (128)

// optimisations
#ifndef MICROPY_OPT_COMPUTED_GOTO
#define MICROPY_OPT_COMPUTED_GOTO   (1)
#endif

// Don't enable lookup cache on M0 (low RAM)
#ifndef MICROPY_OPT_MAP_LOOKUP_CACHE
#define MICROPY_OPT_MAP_LOOKUP_CACHE (__CORTEX_M > 0)
#endif

// emitters
#define MICROPY_PERSISTENT_CODE_LOAD (1)
#ifndef MICROPY_EMIT_THUMB
#define MICROPY_EMIT_THUMB          (1)
#endif
#ifndef MICROPY_EMIT_INLINE_THUMB
#define MICROPY_EMIT_INLINE_THUMB   (1)
#endif

// Python internal features
#define MICROPY_TRACKED_ALLOC       (MICROPY_SSL_MBEDTLS || MICROPY_BLUETOOTH_BTSTACK)
#define MICROPY_READER_VFS          (1)
#define MICROPY_ENABLE_GC           (1)
#define MICROPY_ENABLE_EMERGENCY_EXCEPTION_BUF (1)
#define MICROPY_EMERGENCY_EXCEPTION_BUF_SIZE (0)
#define MICROPY_REPL_INFO           (1)
#define MICROPY_LONGINT_IMPL        (MICROPY_LONGINT_IMPL_MPZ)
#ifndef MICROPY_FLOAT_IMPL // can be configured by each board via mpconfigboard.mk
#define MICROPY_FLOAT_IMPL          (MICROPY_FLOAT_IMPL_FLOAT)
#endif
#define MICROPY_USE_INTERNAL_ERRNO  (1)
#define MICROPY_SCHEDULER_DEPTH     (8)
#define MICROPY_SCHEDULER_STATIC_NODES (1)
#define MICROPY_VFS                 (1)

// control over Python builtins
#ifndef MICROPY_PY_BUILTINS_HELP_TEXT
#define MICROPY_PY_BUILTINS_HELP_TEXT ra_help_text
#endif
#ifndef MICROPY_PY_SYS_PLATFORM     // let boards override it if they want
#define MICROPY_PY_SYS_PLATFORM     "renesas-ra"
#endif
#ifndef MICROPY_PY_THREAD
#define MICROPY_PY_THREAD           (0)
#endif

// extended modules
#define MICROPY_PY_OS_INCLUDEFILE   "ports/renesas-ra/modos.c"
#define MICROPY_PY_OS_DUPTERM       (3)
#define MICROPY_PY_OS_DUPTERM_BUILTIN_STREAM (1)
#define MICROPY_PY_OS_DUPTERM_STREAM_DETACHED_ATTACHED (1)
#define MICROPY_PY_OS_SYNC          (1)
#define MICROPY_PY_OS_UNAME         (1)
#define MICROPY_PY_OS_URANDOM       (MICROPY_HW_ENABLE_RNG)
#define MICROPY_PY_TIME_GMTIME_LOCALTIME_MKTIME (1)
#define MICROPY_PY_TIME_TIME_TIME_NS (1)
#define MICROPY_PY_TIME_INCLUDEFILE "ports/renesas-ra/modtime.c"
#define MICROPY_PY_LWIP_SOCK_RAW    (MICROPY_PY_LWIP)
#ifndef MICROPY_PY_MACHINE
#define MICROPY_PY_MACHINE          (1)
#define MICROPY_PY_MACHINE_INCLUDEFILE "ports/renesas-ra/modmachine.c"
#define MICROPY_PY_MACHINE_RESET    (1)
#define MICROPY_PY_MACHINE_BARE_METAL_FUNCS (1)
#define MICROPY_PY_MACHINE_BOOTLOADER (1)
#define MICROPY_PY_MACHINE_ADC      (1)
#define MICROPY_PY_MACHINE_ADC_INCLUDEFILE "ports/renesas-ra/machine_adc.c"
#define MICROPY_PY_MACHINE_ADC_READ (1)
#define MICROPY_PY_MACHINE_DHT_READINTO (1)
#define MICROPY_PY_MACHINE_PULSE    (1)
#define MICROPY_PY_MACHINE_PIN_MAKE_NEW mp_pin_make_new
#define MICROPY_PY_MACHINE_SOFTI2C  (1)
#define MICROPY_PY_MACHINE_SPI      (1)
#define MICROPY_PY_MACHINE_SPI_MSB  (SPI_FIRSTBIT_MSB)
#define MICROPY_PY_MACHINE_SPI_LSB  (SPI_FIRSTBIT_LSB)
#define MICROPY_PY_MACHINE_SOFTSPI  (1)
#define MICROPY_PY_MACHINE_TIMER    (1)
#define MICROPY_SOFT_TIMER_TICKS_MS uwTick
#if MICROPY_HW_ENABLE_HW_PWM
#define MICROPY_PY_MACHINE_PWM      (1)
#define MICROPY_PY_MACHINE_PWM_DUTY (1)
#define MICROPY_PY_MACHINE_PWM_INCLUDEFILE  "ports/renesas-ra/machine_pwm.c"
#endif
#define MICROPY_PY_MACHINE_UART     (1)
#define MICROPY_PY_MACHINE_UART_INCLUDEFILE "ports/renesas-ra/machine_uart.c"
#define MICROPY_PY_MACHINE_UART_IRQ (1)
#define MICROPY_PY_MACHINE_UART_READCHAR_WRITECHAR (1)
#define MICROPY_PY_MACHINE_UART_SENDBREAK (1)
#if MICROPY_HW_ENABLE_HW_DAC
#define MICROPY_PY_MACHINE_DAC      (1)
#endif
#endif
#define MICROPY_HW_SOFTSPI_MIN_DELAY (0)
#define MICROPY_HW_SOFTSPI_MAX_BAUDRATE (48000000 / 48)
#ifndef MICROPY_PY_ONEWIRE
#define MICROPY_PY_ONEWIRE          (1)
#endif

// fatfs configuration used in ffconf.h
#define MICROPY_FATFS_ENABLE_LFN       (2)
#define MICROPY_FATFS_LFN_CODE_PAGE    437 /* 1=SFN/ANSI 437=LFN/U.S.(OEM) */
#define MICROPY_FATFS_USE_LABEL        (1)
#define MICROPY_FATFS_RPATH            (2)
#define MICROPY_FATFS_MULTI_PARTITION  (1)
#if MICROPY_HW_USB_MSC
// Set FatFS block size to flash sector size to avoid caching
// the flash sector in memory to support smaller block sizes.
#define MICROPY_FATFS_MAX_SS           (FLASH_SECTOR_SIZE)
#endif

// By default networking should include sockets, ssl, websockets, webrepl, dupterm.
#if MICROPY_PY_NETWORK
#ifndef MICROPY_PY_NETWORK_HOSTNAME_DEFAULT
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-ra"
#endif
#ifndef MICROPY_PY_USOCKET
#define MICROPY_PY_USOCKET              (1)
#endif
#ifndef MICROPY_PY_USSL
#define MICROPY_PY_USSL                 (1)
#endif
#ifndef MICROPY_PY_UWEBSOCKET
#define MICROPY_PY_UWEBSOCKET           (1)
#endif
#ifndef MICROPY_PY_WEBREPL
#define MICROPY_PY_WEBREPL              (1)
#endif
#endif

#if MICROPY_PY_MACHINE
#define MACHINE_BUILTIN_MODULE_CONSTANTS \
    { MP_ROM_QSTR(MP_QSTR_machine), MP_ROM_PTR(&mp_module_machine) },
#else
#define MACHINE_BUILTIN_MODULE_CONSTANTS
#endif

// extra constants
#define MICROPY_PORT_CONSTANTS \
    MACHINE_BUILTIN_MODULE_CONSTANTS \

#define MP_STATE_PORT MP_STATE_VM

#if MICROPY_PY_NETWORK_ESP_HOSTED
extern const struct _mp_obj_type_t mod_network_esp_hosted_type;
#define MICROPY_HW_NIC_ESP_HOSTED   { MP_ROM_QSTR(MP_QSTR_WLAN), MP_ROM_PTR(&mod_network_esp_hosted_type) },
#else
#define MICROPY_HW_NIC_ESP_HOSTED
#endif

#ifndef MICROPY_BOARD_NETWORK_INTERFACES
#define MICROPY_BOARD_NETWORK_INTERFACES
#endif

#define MICROPY_PORT_NETWORK_INTERFACES \
    MICROPY_HW_NIC_ESP_HOSTED \
    MICROPY_BOARD_NETWORK_INTERFACES \

// Miscellaneous settings

#ifndef MICROPY_HW_USB_VID
#define MICROPY_HW_USB_VID  (0xf055)
#endif
#ifndef MICROPY_HW_USB_PID
#define MICROPY_HW_USB_PID  (0x9800)
#endif

// type definitions for the specific machine

#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((uint32_t)(p) | 1))

#define MP_SSIZE_MAX (0x7fffffff)

// Assume that if we already defined the obj repr then we also defined these items
#ifndef MICROPY_OBJ_REPR
#define UINT_FMT "%u"
#define INT_FMT "%d"
typedef int mp_int_t; // must be pointer size
typedef unsigned int mp_uint_t; // must be pointer size
#endif

typedef long mp_off_t;

#if MICROPY_PY_THREAD
#define MICROPY_EVENT_POLL_HOOK \
    do { \
        extern void mp_handle_pending(bool); \
        mp_handle_pending(true); \
        if (pyb_thread_enabled) { \
            MP_THREAD_GIL_EXIT(); \
            pyb_thread_yield(); \
            MP_THREAD_GIL_ENTER(); \
        } else { \
            __WFI(); \
        } \
    } while (0);

#define MICROPY_THREAD_YIELD() pyb_thread_yield()
#else
#define MICROPY_EVENT_POLL_HOOK \
    do { \
        extern void mp_handle_pending(bool); \
        mp_handle_pending(true); \
        __WFI(); \
    } while (0);

#define MICROPY_THREAD_YIELD()
#endif

#ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
#define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1)
#endif

#ifndef MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
#define MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS (MICROPY_BLUETOOTH_NIMBLE)
#endif

// We need an implementation of the log2 function which is not a macro
#define MP_NEED_LOG2 (1)

// We need to provide a declaration/definition of alloca()
#include <alloca.h>