SmartPhone

This project is a simple implementation of a phone based on the GSM/GPRS module A6. It is based on the RaspberryPI3 platform. The project is based on the following components:

• Raspberry PI3 B+
• A6/A9 GSM/GPRS module
• 2.8" TFT LCD screen
• Microphone
• Rotary dial

The project is divided into 2 parts:

• The backend part: This part is responsible for the communication with the GSM/GPRS module. It is based on the AT commands sent via SerialPort under Qt framework.
• The frontend part: This part is responsible for the communication with the user. It is based on the LCD screen and the microphone. It is based on the Qt and ncurses.

Prerequisites

• Qt 5.15.2
• ncurses 6.2
• WiringPi(optional for the rotary dial)
• readline

Installation

Assuming that you have installed needed packages, you can build the project by running the following commands(can be installed on Raspberry PI3 or on a PC):

$ git clone
$ cd SmartPhone
$ cmake .

Usage

1. Make sure that the A6/A9 module is connected to the Raspberry PI3.
2. Run the following command:

$ ./SmartPhone

It's recommended to run the program as root.

$ sudo ./SmartPhone

You can navigate through the menu by using the keyboard arrows.