athom-rgbct-light.yaml

substitutions:
  # Default name
  name: "athom-rgbcct-bulb"
  # Default friendly name
  friendly_name: "Athom RGBCCT Bulb"
  # Allows ESP device to be automatically linked to an 'Area' in Home Assistant. Typically used for areas such as 'Lounge Room', 'Kitchen' etc
  room: ""
  # Description as appears in ESPHome & top of webserver page
  device_description: "athom 15w rgbcct light bulb"
  # Project Name
  project_name: "Athom Technology.Athom RGBCCT Bulb"
  # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
  project_version: "v1.1.2"
   # Restore the light (GPO switch) upon reboot to state:
  light_restore_mode: RESTORE_DEFAULT_ON
  # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
  dns_domain: ""
  # Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
  timezone: ""
  # Set the duration between the sntp service polling ntp.org servers for an update
  sntp_update_interval: 6h
  # Network time servers for your region, enter from lowest to highest priority. To use local servers update as per zones or countries at: https://www.ntppool.org/zone/@
  sntp_server_1: "0.pool.ntp.org"
  sntp_server_2: "1.pool.ntp.org"
  sntp_server_3: "2.pool.ntp.org"
  # Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
  wifi_fast_connect: "false"
  # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
  log_level: "DEBUG"
  # Enable or disable the use of IPv6 networking on the device
  ipv6_enable: "false"
  color_interlock: "true"

globals:
  - id: fast_boot
    type: int
    restore_value: yes
    initial_value: '0'

  - id: restore_mode
    type: int
    restore_value: yes
    initial_value: "1"

select:
  - platform: template
    name: "Power On State"
    id: "power_mode"
    optimistic: true
    options:
      - Always Off
      - Always On
      - Restore Power Off State
    on_value:
      then:
        - lambda: |-
            id(restore_mode)=i+1;

esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"
  comment: "${device_description}"
  area: "${room}"
  name_add_mac_suffix: true
  min_version: 2024.6.0
  project:
    name: "${project_name}"
    version: "${project_version}"
  on_boot:
      then:
        - script.execute: fast_boot_script
        - select.set_index:
            id: power_mode
            index: !lambda |-
                    return id(restore_mode)-1;
        - lambda: |-
              switch(id(restore_mode))
              {
              case 1:{
                      auto call = id(rgbct_light).turn_off();
                      call.perform();
                      break;
                      }
              case 2:{
                      auto call = id(rgbct_light).turn_on();
                      call.set_color_mode(ColorMode::WHITE);
                      call.set_brightness(1.0);
                      call.perform();
                      break;
                      }
              default:{
                      break;
                      }
              }

esp8266:
  board: esp8285
  restore_from_flash: true

preferences:
  flash_write_interval: 1min

api:

ota:
  - platform: esphome

logger:
  level: ${log_level}
  baud_rate: 115200

mdns:
  disabled: false

web_server:
  port: 80

network:
  enable_ipv6: ${ipv6_enable}

wifi:
  # This spawns an AP with the device name and mac address with no password.
  ap: {}
  # Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
  fast_connect: "${wifi_fast_connect}"
  # Define dns domain / suffix to add to hostname
  domain: "${dns_domain}"

captive_portal:

dashboard_import:
  package_import_url: github://athom-tech/athom-configs/athom-rgbct-light.yaml

binary_sensor:
  - platform: status
    name: "Status"
    entity_category: diagnostic

sensor:
  - platform: uptime
    name: "Uptime Sensor"
    id: uptime_sensor
    entity_category: diagnostic
    internal: true

  - platform: wifi_signal
    name: "WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"

  - platform: copy
    source_id: wifi_signal_db
    name: "WiFi Signal Percent"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "Signal %"
    entity_category: "diagnostic"
    device_class: ""

button:
  - platform: restart
    name: "Restart"
    entity_category: config

  - platform: factory_reset
    name: "Factory Reset"
    id: Reset
    entity_category: config

  - platform: safe_mode
    name: "Safe Mode"
    internal: false
    entity_category: config

output:
  - platform: esp8266_pwm
    id: red_output
    pin: GPIO4
    min_power: 0.000499
    max_power: 1
    zero_means_zero: true
  - platform: esp8266_pwm
    id: green_output
    pin: GPIO12
    min_power: 0.000499
    max_power: 1
    zero_means_zero: true
  - platform: esp8266_pwm
    id: blue_output
    pin: GPIO14
    min_power: 0.000499
    max_power: 1
    zero_means_zero: true
  - platform: esp8266_pwm
    id: white_output
    pin: GPIO5
    min_power: 0.01
    max_power: 0.9
    zero_means_zero: true
  - platform: esp8266_pwm
    id: ct_output
    inverted: true
    pin: GPIO13
    min_power: 0.01
    max_power: 0.9
    zero_means_zero: true

light:
  - platform: rgbct
    id: rgbct_light
    name: "RGBCCT_Bulb"
    restore_mode: ${light_restore_mode}
    red: red_output
    green: green_output
    blue: blue_output
    white_brightness: white_output
    color_temperature: ct_output
    cold_white_color_temperature: 153 mireds
    warm_white_color_temperature: 500 mireds
    color_interlock: ${color_interlock}

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "IP Address"
      entity_category: diagnostic
    ssid:
      name: "Connected SSID"
      entity_category: diagnostic
    mac_address:
      name: "Mac Address"
      entity_category: diagnostic

  #  Creates a sensor showing when the device was last restarted
  - platform: template
    name: 'Last Restart'
    id: device_last_restart
    icon: mdi:clock
    entity_category: diagnostic
#    device_class: timestamp

  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
  - platform: template
    name: "Uptime"
    entity_category: diagnostic
    lambda: |-
      int seconds = (id(uptime_sensor).state);
      int days = seconds / (24 * 3600);
      seconds = seconds % (24 * 3600);
      int hours = seconds / 3600;
      seconds = seconds % 3600;
      int minutes = seconds /  60;
      seconds = seconds % 60;
      if ( days > 3650 ) {
        return { "Starting up" };
      } else if ( days ) {
        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( hours ) {
        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( minutes ) {
        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else {
        return { (String(seconds) +"s").c_str() };
      }
    icon: mdi:clock-start

time:
  - platform: sntp
    id: sntp_time
  # Define the timezone of the device
    timezone: "${timezone}"
  # Change sync interval from default 5min to 6 hours (or as set in substitutions)
    update_interval: ${sntp_update_interval}
  # Set specific sntp servers to use
    servers:
      - "${sntp_server_1}"
      - "${sntp_server_2}"
      - "${sntp_server_3}"
  # Publish the time the device was last restarted
    on_time_sync:
      then:
        # Update last restart time, but only once.
        - if:
            condition:
              lambda: 'return id(device_last_restart).state == "";'
            then:
              - text_sensor.template.publish:
                  id: device_last_restart
                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'

script:
  - id: fast_boot_script
    then:
      - if:
          condition:
            lambda: return ( id(fast_boot) >= 3 );
          then:
            - lambda: |-
                ESP_LOGD("athom-rgbct-light.yaml", "Now the counter is greater than or equal to 3, perform reset device and reboot");
                id(fast_boot) = 0;
                fast_boot->loop();
                global_preferences->sync();
                auto call = id(rgbct_light).turn_on();
                call.set_transition_length(500);
                call.set_brightness(1.0);
                call.set_color_mode(ColorMode::RGB);
                call.set_rgb(0.0, 0.0, 1.0);
                call.perform();
            - delay: 5s
            - button.press: Reset
      - lambda: |-
          id(fast_boot) += 1;
          fast_boot->loop();
          global_preferences->sync();
          ESP_LOGD("athom-rgbct-light.yaml", "Now the counter is %d.  Reset the device when the counter is greater than or equal to 3", id(fast_boot));
      - delay: 10s
      - lambda: |-
          ESP_LOGD("athom-rgbct-light.yaml", "Reset counter");
          id(fast_boot) = 0;
          fast_boot->loop();
          global_preferences->sync();