TangPrimer-20K-example

---

• IDE 基础使用步骤:点我
• IDE Instructions:Click me

---

• TangPrimer-20K-example
  • Note
    • Error code:RP2017
  • Examples
    • Lite-bottom_test_project
    • DDR-Test
    • SPI_lcd
    • RGB_lcd
    • Cam2lcd
    • Micarray
    • rocket
    • WS2812
    • USB
    • UART
    • PT8211 (Stereo Audio)
    • Ethernet
  • Tang Primer 20K Dock pin constrain
    • Clk pin
    • Reset pin
    • RGB LCD
    • Camera
    • USB
    • Ethernet
    • DDR
    • SPI LCD
    • UART
    • SD card/SDIO
    • Audio DAC

Note

Error code:RP2017

When you meet error code PR2017, just enable corresponding IO as regular IO.

Click Project in top menu bar and choose Configuration, then enable the corresponding Dual Purpose Pin to deal with this error.

Examples

Lite-bottom_test_project

This is the test project which is used for testing Lite-bottom and core board(Factory test). Including the DDR-Test project and another demo containing all other usable IO blink.

DDR-Test

Thanks ZiyangYE providing this example. Using serial-communication with 115200 baudrates to shows result.

SPI_lcd

This is an example driving 1.14 inch spi screen.

RGB_lcd

Screen datasheet: Click me

Cross colorbar on the screen.

480x272_4.3inch_lcd	800x480_5inch_lcd

Colorbar on screen

rgb_lcd_4.3inch_colorbar	rgb_lcd_5inch_colorbar

Cam2lcd

There are 4 projects, their name rules are as followings:

Folder name	Camera	Screen resolution	Frame storge mode
OV5640_LCD480_DDR3	OV5640	480x272	DDR3
OV5640_LCD800_DDR3	OV5640	800x480	DDR3
OV5640_LCD480_FIFO	OV5640	480x272	FIFO
OV5640_LCD800_FIFO	OV5640	800x480	FIFO

These are only for testing, and if you want better results, you need program on yourself.

After burning the .fs bitstream into fpga, press S0 button to reset fpga chip to get right display.

Micarray

There is demo for micarray board.

rocket

This runs a rv32ic rocket core with a UART peripheral attached. This example system outputs A via UART infinitely.

WS2812

A demo for onboard ws2812 led.

USB

Demo of onboard USB3317 Hi-Speed USB serial pool based on LUNA.

UART

A demo of UART, set baudrate and open the onboard COM port to see the message.

PT8211 (Stereo Audio)

A demo to drive PT8211-S which is the audio DAC on Primer 20K Dock. Be careful of the voice because it's loud.

Ethernet

• verilog_UDP

A Ethernet example from LAKKA verilog_UDP

Tang Primer 20K Dock pin constrain

Clk pin

The clock pin on primer 20K is H11

Reset pin

The reset pin on primer 20K is T10

RGB LCD

PORT	IO	Pin	PORT	IO	Pin
lcd_dclk	output	R9	lcd_de	output	E15
lcd_hs	output	A15	lcd_vs	output	D14
lcd_r[0]	output	L9	lcd_r[1]	output	N8
lcd_r[2]	output	N9	lcd_r[3]	output	N7
lcd_r[4]	output	N6	lcd_g[0]	output	D11
lcd_g[1]	output	A11	lcd_g[2]	output	B11
lcd_g[3]	output	P7	lcd_g[4]	output	R7
lcd_g[5]	output	D10	lcd_b[0]	output	B12
lcd_b[1]	output	C12	lcd_b[2]	output	B13
lcd_b[3]	output	A14	lcd_b[4]	output	B14

Camera

PORT	IO	Pin	PORT	IO	Pin
cmos_scl	inout	F14	cmos_sda	inout	F16
cmos_vsync	input	G15	cmos_href	input	G14
cmos_pclk	input	F13	cmos_xclk	output	G12
cmos_rst_n	output	L13	cmos_pwdn	output	C10
cmos_db[0]	input	T12	cmos_db[1]	input	T11
cmos_db[2]	input	P11	cmos_db[3]	input	R11
cmos_db[4]	input	M15	cmos_db[5]	input	M14
cmos_db[6]	input	J16	cmos_db[7]	input	J14

USB

PORT	IO	Pin	PORT	IO	Pin
ulpi_stp	output	K11	ulpi_rst	output	F10
ulpi_data[7]	inout	R12	ulpi_data[6]	inout	P13
ulpi_data[5]	inout	R13	ulpi_data[4]	inout	T14
ulpi_data[3]	inout	H13	ulpi_data[2]	inout	J12
ulpi_data[1]	inout	H12	ulpi_data[0]	inout	G11
ulpi_nxt	input	K13	ulpi_dir	input	K12
ulpi_clk	input	T15	rst_n	input	T3

Ethernet

PORT	IO	Pin	PORT	IO	Pin
phyrst	output	F10	netrmii_clk50m"	input	A9
netrmii_txd[0]	output	D16	netrmii_txd[1]	output	E14
netrmii_txen	output	E16	netrmii_rx_crs	input	M6
netrmii_rxd[0]	input	F15	netrmii_rxd[1]	input	C9
netrmii_mdc	output	F14	netrmii_mdio	inout	F16

DDR

PORT	IO	Pin	PORT	IO	Pin
ddr_bank[0]	output	H4	ddr_bank[1]	output	D3
ddr_bank[2]	output	H5	ddr_odt	output	R3
ddr_addr[0]	output	F7	ddr_addr[1]	output	A4
ddr_addr[2]	output	D6	ddr_addr[3]	output	F8
ddr_addr[4]	output	C4	ddr_addr[5]	output	E6
ddr_addr[6]	output	B1	ddr_addr[7]	output	D8
ddr_addr[8]	output	A5	ddr_addr[9]	output	F9
ddr_addr[10]	output	K3	ddr_addr[11]	output	B7
ddr_addr[12]	output	A3	ddr_addr[13]	output	C8
ddr_cke	output	J2	ddr_we	output	L2
ddr_cas	output	R6	ddr_ras	output	R4
ddr_dm[0]	output	G1	ddr_dm[1]	output	K5
ddr_ck	output	J1,J3	ddr_reset_n	output	B9
ddr_dqs[0]	inout	G2,G3	ddr_dqs[1]	inout	J5,K6
ddr_dq[0]	inout	G5	ddr_dq[1]	inout	F5
ddr_dq[2]	inout	F4	ddr_dq[3]	inout	F3
ddr_dq[4]	inout	E2	ddr_dq[5]	inout	C1
ddr_dq[6]	inout	E1	ddr_dq[7]	inout	B3
ddr_dq[8]	inout	M3	ddr_dq[9]	inout	K4
ddr_dq[10]	inout	N2	ddr_dq[11]	inout	L1
ddr_dq[12]	inout	P4	ddr_dq[13]	inout	H3
ddr_dq[14]	inout	R1	ddr_dq[15]	inout	M2
ddr_cs	output	P5

SPI LCD

PORT	IO	Pin	PORT	IO	Pin
lcd_bl	output	P12	lcd_data	output	L15
lcd_rs	output	J13	lcd_cs	output	C16
lcd_clk	output	F12	lcd_resetn	output	G13

UART

PORT	IO	Pin	PORT	IO	Pin
uart_tx	output	M11	uart_rx	input	T13

SD card/SDIO

PORT	IO	Pin	PORT	IO	Pin
CLK	output	N10	CMD	input	R14
DAT0	inout	M8	DAT1	inout	M7
DAT2	inout	M10	DAT3	inout	N11
DET_A	input	D15

Audio DAC

PORT	IO	Pin	PORT	IO	Pin
PA_EN	output	R16	HP_DIN	output	P15
HP_WS	output	P16	HP_BCK	output	N15