Easymon

Easymon helps you monitor your application's availability. It provides a simple way to test the availability of resources your application needs, like the application database, a memcached connection, or a redis instance. These test results can be used by a load balancer to determine the general health and viability of the node your application is running on.

It's packaged up as a rails engine for 3.1 and greater, and a plugin for 2.3 - 3.0.

History

This gem extracts and modularizes the logic we had in our monitoring controllers and were copying back and forth between applications.

Installation

Add to Gemfile and bundle!:

gem 'easymon'

Usage

To get started, you'll need to add an initializer for this to do anything. In config/initializers/easymon.rb:

Easymon::Repository.add("application-database", Easymon::ActiveRecordCheck.new(ActiveRecord::Base))

This will register a check called application-database for use.

Next, we need to add the routes to your application. Depending on the rails version, this is done one of two ways:

Rails 2.3.x & 3.0

Add Easymon.routes(map) to your config/routes.rb. This will put the Easymon routes under /up. If you want Easymon mounted somewhere other than /up, use Easymon.routes(map, "/monitoring"). That would put the Easymon paths under /monitoring. For Rails 3.0, the default routes file does not provide map, so use Easymon.routes(self) instead.

Rails 3.1+

Rails 3.1+ gives us mountable engines, so use the standard syntax, adding mount Easymon::Engine => "/up" to your config/routes.rb.

Now, you can run your entire checklist by visiting /up, or wherever you have mounted the application. If you want to just test the single check, go to /up/application-database, and only the check named application-database will be run.

Critical Checks

If you have several services that are critical to your app, and others that are not, you can segregate those for health check purposes if you wish. Assuming your database and redis are critical, but memcached is not, again in config/initializers/easymon.rb:

Easymon::Repository.add(
  "application-database",
  Easymon::ActiveRecordCheck.new(ActiveRecord::Base),
  :critical
)
Easymon::Repository.add(
  "redis",
  Easymon::RedisCheck.new(
    YAML.load_file(
      Rails.root.join("config/redis.yml")
    )[Rails.env].symbolize_keys
  ),
  :critical
)
Easymon::Repository.add(
  "memcached",
  Easymon::MemcachedCheck.new(Rails.cache)
)

In addition to the main route /up, this will register four checks, individually available at:

• /up/application-database
• /up/redis
• /up/memcached
• /up/critical - Runs both the application-database and redis checks.

Security

You might not want to have this data available to everyone who hits your site, as it can expose both timing data and, depending on your check names, various bits of your infrastructure. You can tell Easymon what addresses, headers, or whatever defines an authorized request by providing a block to Easymon.authorize_with that will be called with the current request object:

Easymon.authorize_with = Proc.new { |request| request.remote_ip == '192.168.1.1'}
# Or
Easymon.authorize_with = Proc.new { |request|
  request.headers["X-Forwarded-For"].nil?
}

This will get run on each request, so keep it simple. (Actually, that's a good rule of thumb for any checks you write, too. Remember, these are all in your main app request pipeline!)

Checks

A check can be any ruby code that responds_to? a #check method that returns a two element array. The first element is the result of executing the check and should be true or false. The second element is the message describing what's going on. The array would look something like this: [true, "Up"] in the case of a successful check or [false, "Timeout"] in the case of a failed check.

Included Checks

• ActiveRecord
• Redis
• Memcached
• Semaphore
• Traffic Enabled
• Split ActiveRecord
• Http

ActiveRecord

Easymon::ActiveRecordCheck is a basic check that uses ActiveRecord to check the availability of your main database. It's usually invoked as such:

Easymon::ActiveRecordCheck.new(ActiveRecord::Base)

Internally, it checks klass.connection.active? where klass is whatever class you passed to the check. Usually this will be ActiveRecord::Base, but feel free to go crazy.

Redis

Easymon::RedisCheck will check the availability of a Redis server, given an appropriate config hash. Typically, we'll read the config off disk, but as long as you get a valid config hash, this will work:

Easymon::RedisCheck.new(
  YAML.load_file(Rails.root.join("config/redis.yml"))[Rails.env].symbolize_keys
)

This is the most visually complex test to instantiate, but it's only because we're loading the config from disk and getting the config block that matches the Rails.env in one line. As long as you pass a hash that can be used by Redis.new, it doesn't care where the config comes from.

Memcached

Easymon::MemcachedCheck is a basic check that will write and then read a key from the cache. It expects a cache instance to check, so it could be as easy as:

Easymon::MemcachedCheck.new(Rails.cache)

Semaphore

Easymon::Semaphore checks for the presence of a file on disk relative to the Rails.root of the current application.

check = Easymon::SemaphoreCheck.new("config/redis.yml")

This is mainly a check that gets subclassed by the next check.

Traffic Enabled

Easymon::TrafficEnabledCheck is fairly specific, but when we want a server to accept traffic, we can place a file in the Rails.root, and the load balancers can use the result of this check to help decide whether or not to send traffic to the node.

Easymon::TrafficEnabledCheck.new("enable-traffic")

This is a subclass of the Semaphore check mentioned above.

Split ActiveRecord

Easymon::SplitActiveRecordCheck is the most complicated check, as it's not something you can use out of the gate. Here we pass a block so we get a fresh instance of ActiveRecord::Base or whatever other class we might be using to make a secondary database connection.

For example, given the following other class:

module Easymon
  class Base < ActiveRecord::Base
    def establish_connection(spec = nil)
      if spec
        super
      elsif config = Easymon.database_configuration
        super config
      end
    end
    def database_configuration
      env = "#{Rails.env}_replica"
      config = YAML.load_file(Rails.root.join('config/database.yml'))[env]
    end
  end
end

We would check both it and ActiveRecord::Base like so:

check = Easymon::SplitActiveRecordCheck.new {
  [ActiveRecord::Base.connection, Easymon::Base.connection]
}
Easymon::Repository.add("split-database", check)

Http

Easymon::HttpCheck will check the return status of a HEAD request to a URL. Great for checking service endpoint availability! The following will make a request to port 9200 on localhost, which is where you might have Elasticsearch running:

Easymon::HttpCheck.new("http://localhost:9200")

Typically, we'll read an elasticsearch config off disk, and use the URL like so:

config = YAML.load_file(Rails.root.join("config/elasticsearch.yml"))[Rails.env].symbolize_keys
Easymon::HttpCheck.new(config[:url])

Testing

To run the tests, you need MySQL server installed and running, and accepting connections on localhost:3306 for the root user with a blank password, as configured in database.yml.

Create the MySQL test databases by running:

bundle exec rake db:create

To run tests on PostgreSQL, you need the server installed and running, and accepting connections on localhost:5432 for the dummy user. You can create the dummy user with the following command in psql:

CREATE USER dummy WITH PASSWORD 'dummy';

Then run the tests with:

bundle exec rake test

How to contribute

Here's the most direct way to get your work merged into the project:

1. Fork the project
2. Clone down your fork
3. Create a feature branch
4. Add your feature + tests
5. Document new features in the README
6. Make sure everything still passes by running the tests
7. If necessary, rebase your commits into logical chunks, without errors
8. Push the branch up
9. Send a pull request for your branch

If you're going to make a major change ask first to make sure it's in line with the project goals.

To Do

See the issues page. 😄

Authors

• Nathan Anderson

License

See LICENSE