NEWS.md

fansi Release Notes

v1.0.6

• Fix new -Wformat warnings.

v1.0.5

• Address roxygen2 breaking changes:
  • Add explicit alias for fansi-package now that it is no longer auto-generated by roxgen2 from the @docType package directive.
  • Work around changed behavior for @inheritParams.

v1.0.4

CRAN compiled code warning suppression release.

• Fix void function declarations and definitions.
• Change sprintf to snprintf.

v1.0.3

• Address problem uncovered by gcc-12 linters, although the issue itself could not manifest due to redundancy of checks in the code.

v1.0.0-2

This is a major release and includes some behavior changes.

Features

• New functions:
  • #26 Replacement forms of substr_cl (i.e substr_ctl<-).
  • state_at_end to compute active state at end of a string.
  • close_state to generate a closing sequence given an active state.
  • #31 trimws_ctl as an equivalent to trimws.
  • #64 normalize_sgr converts compound Control Sequences into normalized form (e.g. "ESC[44;31m" becomes "ESC[31mESC[44m") for better compatibility with crayon. Additionally, most functions gain a normalize parameter so that they may return their output in normalized form (h/t @krlmlr).
• #74substr_ctl and related functions are now all-C instead of a combination of C offset computations and R level substr operations. This greatly improves performance, particularly for vectors with many distinct strings. Despite documentation claiming otherwise, substr_ctl was quite slow in that case.
• #66 Improved grapheme support, including accounting for them in type="width" mode, as well as a type="graphemes" mode to measure in graphemes instead of characters. Implementation is based on heuristics designed to work in most common use cases.
• html_esc gains a what parameter to indicate which HTML special characters should be escaped.
• Many functions gain carry and terminate parameters to control how fansi generated substrings interact with surrounding formats.
• #71 Functions that write SGR and OSC are now more parsimonious (see "Behavior Changes" below).
• #73 Default parameter values retrieved with getOption now always have explicit fallback values defined (h/t @gadenbui).
• Better warnings and error messages, including more granular messages for unhandled_ctl for adjacent Control Sequences.
• term.cap parameter now accepts "all" as value, like the ctl parameter.

Deprecated Functions

• All the "sgr" functions (e.g., substr_sgr, strwrap_sgr) are deprecated. They will likely live on indefinitely, but they are of limited usefulness and with the added support for OSC hyperlinks their name is misleading.
• sgr_to_html is now to_html with slight modifications to semantics; the old function remains and does not warn about unescaped "<" or ">" in the input string.

Behavior Changes

The major intentional behavior change is to default fansi to always recognize true color CSI SGR sequences (e.g. "ESC[38;2;128;50;245m"). The prior default was to match the active terminal capabilities, but it is unlikely that the intent of a user manipulating a string with truecolor sequences is to interpret them incorrectly, even if their terminal does. fansi will continue to warn in this case. To keep the pre-1.0 behavior add "old" to the term.cap parameter.

Additionally, to_html will now warn if it encounters unescaped HTML special character "<" or ">" in the input string.

Finally, the 1.0 release is an extensive refactoring of many parts of the SGR and OSC hyperlink controls (Special Sequences) intake and output algorithms. In some cases this means that some fansi functions will output Special Sequences slightly differently than they did before. In almost all cases the rendering of the output should remain unchanged, although there are some corner cases with changes (e.g. in strwrap_ctl SGRs embedded in whitespace sequences don't break the sequence).

The changes are a side effect of applying more consistent treatment of corner cases around leading and trailing control sequences and (partially) invalid control sequences. Trailing Special Sequences in the output is now omitted as it would be immediately closed (assuming terminate=TRUE, the default). Leading SGR is interpreted and re-output.

Normally output consistency alone would not be a reason to change behavior, but in this case the changes should be almost always undetectable in the rendered output, and maintaining old inconsistent behavior in the midst of a complete refactoring of the internals was beyond my patience. I apologize if these behavior changes adversely affect your programs.

WARNING: we will strive to keep rendered appearance of fansi outputs consistent across releases, but the exact bytes used in the output of Special Sequences may change.

Other changes:

• Tests may no longer pass with R < 4.0 although the package should still function correctly. This is primarily because of changes to the character width Unicode Database that ships with R, and many of the newly added grapheme tests touch parts of that database that changed (emoji).
• CSI sequences with more than one "intermediate" byte are now considered valid, even though they are likely to be very rare, and CSI sequences consume all subsequent bytes until a valid closing byte or end of string is encountered.
• strip_ctl only warns with malformed CSI and OSC if they are reported as supported via the ctl parameter. If CSI and OSC are indicated as not supported, but two byte escapes are, the two initial bytes of CSI and OSCs will be stripped.
• "unknown" encoded strings are no longer translated to UTF-8 in UTF-8 locales (they are instead assumed to be UTF-8).
• nchar_ctl preserves dim, dimnames, and names as the base functions do.
• UTF-8 known to be invalid should not be output, even if present in input (UTF-8 validation is not complete, only sequences that are obviously wrong are detected).

Bug Fixes

• Fix tabs_as_spaces to handle sequential tabs, and to perform better on very wide strings.
• Strings with invalid UTF-8 sequences with "unknown" declared encoding in UTF-8 locales now cause errors instead of being silently translated into byte escaped versions (e.g. "\xf0\xc2" (2 bytes), used to be interpreted as "" (four characters). These now cause errors as they would have if they had had "UTF-8" declared encoding.
• In some cases true colors of form "38;2;x;x;x" and "48;2;x;x;x" would only be partially transcribed.

Internal Changes

• More aggressive UTF-8 validation, also, invalid UTF-8 code points now advance only one byte instead of their putative width based on the initial byte.
• Reduce peak memory usage by making some intermediate buffers eligible for garbage collection prior to native code returning to R.
• Reworked internals to simplify buffer size computation and synchronization, in some cases this might cause slightly reduced performance. Please report any significant performance regressions.
• nchar_ctl(...) is no longer a wrapper for nchar(strip_ctl(...)) so that it may correctly support grapheme width calculations.

v0.5.0

• #65: sgr_to_html optionally converts CSI SGR to classes instead of inline styles (h/t @hadley).
• #69: sgr_to_html is more disciplined about emitting unnecessary HTML (h/t @hadley).
• New functions:
  • sgr_256: Display all 256 8-bit colors.
  • in_html: Easily output HTML in a web page.
  • make_styles: Easily produce CSS that matches 8-bit colors.
• Adjust for changes to nchar(..., type='width') for C0-C1 control characters in R 4.1.
• Restore tests bypassed in 0.4.2.

v0.4.2

• Temporarily bypass tests due to R bug introduced in R-devel 79799.

v0.4.1

• Correctly define/declare global symbols as per WRE 1.6.4.1, (h/t Professor Ripley, Joshua Ulrich for example fixes).
• #59: Provide a split.nl option to set_knit_hooks to mitigate white space issues when using blackfriday for the markdown->html conversion (@krlmlr).

v0.4.0

• Systematized which control sequences are handled specially by adding the ctl parameter to most functions. Some functions such as strip_ctl had existing parameters that did the same thing (e.g. strip, or which), and those have been deprecated in favor of ctl. While technically this is a change in the API, it is backwards compatible (addresses #56 among and other things).
• Added *_sgr version of most *_ctl functions.
• nzchar_ctl gains the ctl parameter.
• #57: Correctly detect when CSI sequences are not actually SGR (previously would apply styles from some non-SGR CSI sequences).
• #55: strsplit_ctl can now work with ctl parameters containing escape sequences provided those sequences are excluded from by the ctl parameter.
• #54: fix sgr_to_html so that it can handle vector elements with un-terminated SGR sequences (@krlmlr).
• Fix bug in width computation of first line onwards in strwrap_ctl when indent/exdent/prefix/initial widths vary from first to second line.
• Fix wrapping in strwrap2_*(..., strip.spaces=FALSE), including a bug when wrap.always=TRUE and a line started in a word-whitespace boundary.
• Add term.cap parameter to unhandled_ctl.

v0.3.0

• fansi::set_knit_hooks makes it easy to automatically convert ANSI CSI SGR sequences to HTML in Rmarkdown documents. We also add a vignette that demonstrates how to do this.
• #53: fix for systems where 'char' is signed (found and fixed by @QuLogic).
• #52: fix bad compilation under ICC (@kazumits).
• #51: documentation improvements (@krlmlr).
• #50: run tests on R 3.1 - 3.4 tests for the rc branch only (@krlmlr).
• #48: malformed call to error in FANSI_check_enc (@msannell).
• #47: compatibility with R versions 3.2.0 and 3.2.1 (@andreadega).

v0.2.3

• #45: add capability to run under R 3.1 hadley, Gábor Csárdi.
• #44: include bright color support in HTML conversion (h/t Will Landau).

Other minor fixes (#43, #46).

v0.2.2

• Remove valgrind uninitialized string errors by avoiding strsplit.
• Reduce R dependency to >= 3.2.x (@gaborcsardi).
• Update tests to handle potential change in substr behavior starting with R-3.6.

v0.2.1

• All string inputs are now encoded to UTF-8, not just those that are used in width calculations.
• UTF-8 tests skipped on Solaris.

v0.2.0

• Add strsplit_ctl.

v0.1.0

Initial release.