Skip to content

Latest commit

 

History

History
133 lines (99 loc) · 5.71 KB

README.md

File metadata and controls

133 lines (99 loc) · 5.71 KB
Raw

About

This repository contains ROS 1 and ROS 2 drivers for the CANLAB CLPE-G-NVP2650D system. CLPE-G-NVP2650D is a multi camera grabber board for N2.0 GMSL camera. This drivers exposes camera images and information from CLPE-G-NVP2650D as ROS messages using the image_transport framework.

This branch contains the ROS 2 driver. For the ROS 1 driver, please switch to the noetic branch.

System Requirements

Requirements:

Note: It is strongly recommended to install Ubuntu 20.04 on the PC shipped with CLPE-G-NVP2650D. This way ROS 2 binaries can be installed as debian packages. If the PC is running Ubuntu 18.04, ROS 2 will need to be built from source which is not officially supported on Ubuntu 18.04. Alternatively, containers or VM may be used but the CLPE-G-NVP2650D drivers has to be properly passed through.

Setup

System dependencies

sudo apt update && sudo apt install git cmake wget gcc python3-colcon* python3-rosdep python3-vcstool -y

ROS 2 Installation

Depending on the version of Ubuntu installed, follow the instructions in the links above to install ROS 2 binaries or from source. To source ROS 2

source /opt/ros/foxy/setup.bash # if binaries are installed
source ~/ros2_foxy/install/setup.bash # if installed from source following link above

Note: Replace foxy with galactic if using ROS 2 Galactic

Install CLPE SDK and ROS 2 Driver

Create workspace

mkdir -p ~/ws_clpe/src
cd ~/ws_clpe/
wget https://raw.githubusercontent.com/canlab-co/clpe_ros/main/clpe.repos
vcs import src < clpe.repos

Install dependencies

cd ~/ws_clpe
# source your ROS 2 workspace before this command
sudo rosdep init # if you have not done this before
rosdep update
rosdep install --from-paths src --ignore-src --rosdistro $ROS_DISTRO -y

Build the driver

cd ~/ws_clpe
# source your ROS 2 workspace if you have not already
colcon build --cmake-args -DCMAKE_BUILD_TYPE=Release
# To also build the benchmarking scripts
colcon build --cmake-args -DCMAKE_BUILD_TYPE=Release -DCLPE_ROS_BUILD_BENCHMARKS=On

Run the driver

DDS Configuration

For better image transport performance over DDS, we recommend using FastDDS with Shared Memory Transport enabled. First copy the the fastdds.xml config file to a suitable directory, eg. $HOME/fastdds.xml

cd ~/ws_clpe/src
cp canlab/fastdds.xml ~/

Next add these two lines to your ~/.bashrc

export RMW_IMPLEMENTATION=rmw_fastrtps_cpp
export FASTRTPS_DEFAULT_PROFILES_FILE=$HOME/fastdds.xml

Make sure to source ~/.bashrc first on all terminals before launching any ROS 2 nodes including the driver.

Launch

cd ~/ws_clpe
source install/setup.bash
ros2 launch clpe_ros clpe_ros.launch.py password:=<sudo-password> encoding:=yuv422

Note: If sudo_password is a number, say 42, you should pass it as password:=\'42\'

By default the driver will publish three topics per camera X.

  • /clpe/cam_X/image_raw: The raw image published as sensor_msgs::msg::Image. The default encoding is yuv422. For other supported encodings, see Configuration below.
  • /clpe/cam_X/camera_info: The intrinsics of the camera published as a sensor_msgs::msg::CameraInfo message.
  • /clpe/cam_X/clpe_camera_info: The intrinsics of the camera published as a clpe_ros_msgs::msg::ClpeCameraInfo message.

ROS2 Component

The driver is also supported as a ROS2 component. To run it, start the component container

ros2 run rclcpp_components component_container

In another terminal, load the component

ros2 component load /ComponentManager clpe_ros clpe::ClpeComponentNode -p password:=<password>

Check that the component is loaded with

ros2 component list

Configuration

The driver supports the following ROS parameters to configure its behavior. The password and encoding parameters can be overwritten at run time. Other parameters can be modified within the launch file.

Key Description Default
password sudo password *Required*
encoding Image encoding, supported formats are: bgr8, bgra8, rgb8, rgba8, mono16, yuv422. Defaults to yuv422. Note that encodings other than yuv422 incurs conversion overhead. yuv422
cam_{n}_enable Enable camera true
cam_{n}_pose Pose relative to the base, 6 values corresponding to [x, y, z, roll, pitch, yaw] [0,0,0,0,0,0]
cam_{n}_frame_id Defines the frame_id all static transformations refers to base_link
cam_{n}_image_qos Sets the QoS by which the topic is published. Available values are the following strings: SYSTEM_DEFAULT, PARAMETER_EVENTS, SERVICES_DEFAULT, PARAMETERS, DEFAULT, SENSOR_DATA, HID_DEFAULT (= DEFAULT with depth of 100), EXTRINSICS_DEFAULT (= DEFAULT with depth of 1 and transient local durabilty). SENSOR_DATA
cam_{n}_info_qos Sets the QoS by which the topic is published. Available values are the following strings: SYSTEM_DEFAULT, PARAMETER_EVENTS, SERVICES_DEFAULT, PARAMETERS, DEFAULT, SENSOR_DATA, HID_DEFAULT (= DEFAULT with depth of 100), EXTRINSICS_DEFAULT (= DEFAULT with depth of 1 and transient local durabilty). SYSTEM_DEFAULT

Unless specified otherwise, all parameters are read-only, that is, they must be initialized at startup and cannot be changed at runtime.