The automated release is failing 🚨 #38

joshsmith · 2018-07-18T00:32:08Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

The text was updated successfully, but these errors were encountered:

joshsmith · 2018-07-25T00:32:31Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-08-01T00:32:55Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-08-08T00:36:31Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-08-15T00:35:26Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-08-22T00:36:11Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-08-29T00:36:32Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-09-05T00:39:08Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-09-12T00:38:08Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-09-26T00:39:42Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-10-03T00:39:51Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-10-10T00:40:26Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-10-17T00:41:10Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-10-24T00:41:41Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-10-31T00:43:30Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-11-07T00:43:04Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-11-14T00:44:54Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-11-21T00:44:56Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-11-28T00:45:56Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-12-05T00:46:11Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-12-12T00:46:24Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-12-19T00:47:49Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2018-12-26T00:48:07Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-01-02T00:48:41Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-01-09T00:57:27Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-01-16T00:50:23Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-01-23T00:50:32Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-01-30T00:50:19Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-02-06T00:52:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-02-13T00:52:08Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-09-18T01:11:15Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-09-25T01:14:06Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-10-02T01:13:36Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-10-09T01:15:27Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-10-16T01:15:31Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-10-23T01:15:48Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-10-30T01:17:01Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-11-06T01:17:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-11-13T01:18:03Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-11-20T01:18:32Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-11-27T01:18:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-12-04T01:18:48Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-12-11T01:19:48Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-12-18T01:20:25Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2019-12-25T01:19:24Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-01-01T01:20:17Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-01-08T01:20:26Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-01-15T01:21:08Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-01-22T01:21:58Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-01-29T01:22:40Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-02-05T01:23:07Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-02-12T01:22:40Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-02-19T01:23:22Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-02-26T01:24:29Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-03-04T01:25:18Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-03-11T01:16:13Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-03-18T01:16:24Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-03-25T01:17:48Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-04-01T01:17:55Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith · 2020-05-06T01:19:07Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

joshsmith added the semantic-release label Jul 18, 2018

The automated release is failing 🚨 #38

The automated release is failing 🚨 #38

Comments

joshsmith commented Jul 18, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Jul 25, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Aug 1, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Aug 8, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Aug 15, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Aug 22, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Aug 29, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Sep 5, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Sep 12, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Sep 26, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Oct 3, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Oct 10, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Oct 17, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Oct 24, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Oct 31, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Nov 7, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Nov 14, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Nov 21, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Nov 28, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Dec 5, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Dec 12, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Dec 19, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Dec 26, 2018

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Jan 2, 2019

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Jan 9, 2019

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

joshsmith commented Jan 16, 2019

🚨 The automated release from the master branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨