Replies: 7 comments 13 replies
-
|
Can you share more information? What say the whiptail dialogue? Can you share some screenshots? |
Beta Was this translation helpful? Give feedback.
-
|
Did you run the Proxmox Update Repositories script in your proxmox shell first before you tried to update? Might be trying to reference old repos that arent able to be maintained instead of the community repos? |
Beta Was this translation helpful? Give feedback.
-
|
I should have brought up one problem at a time. If you're asking about Home Assistant, I got the following error: root@homeassistant-core:~# I've run update a number of times on this instance without issue. UpdateI ran the update repositories script. It gave a few errors on some of my LXC's, but not Home Assistant. I reran the update afterwards and got the same error. |
Beta Was this translation helpful? Give feedback.
-
|
Which Script do you use? |
Beta Was this translation helpful? Give feedback.
-
|
Are you asking what script I used to do the update? If so, I just typed update on the console prompt. |
Beta Was this translation helpful? Give feedback.
-
|
Can you share a Screenshot of this Output: nano /usr/bin/update |
Beta Was this translation helpful? Give feedback.
-
|
Just one line: When I run the script, I take all the defaults. |
Beta Was this translation helpful? Give feedback.
-
|
okay i just wanted to make sure it wasn't still referencing the old repo. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, yesterday I noticed that if I do in some lxc. apt update && apt upgrade -y and then run the update command to update using the script, that's when it gives problems. |
Beta Was this translation helpful? Give feedback.
-
|
What? 😄 Can you declare a little bit better? |
Beta Was this translation helpful? Give feedback.
-
|
hahahahaha !!! sorry. I don't know if you understand me now, sorry. |
Beta Was this translation helpful? Give feedback.
-
|
I also have an error after the update node-red. I installed a new container and the error immediately. Stopped nodered.service - Node-RED. Any ideas on how to deal with this? |
Beta Was this translation helpful? Give feedback.
-
|
I can do it. How do you do verbose mode? Is it an option when the script runs? I don't remember seeing it. |
Beta Was this translation helpful? Give feedback.
-
|
Opened a topic. #624 I installed the container again. During installation, a line popped up \update failed - see /var/log/pveam.log for details /var/log/pveam.log 2024-12-01 22:28:28 starting update |
Beta Was this translation helpful? Give feedback.
-
Advanced Mode, enter all and in the Last or pre Last Section Switch to yes If verbose |
Beta Was this translation helpful? Give feedback.
-
|
Sorry to be so clueless. How do you enter advanced mode? I found an example. It shows it as step in the script. I don't see that step. |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
Clean installation. No errors during installation. Same result. root@node-red:~# node-red-log Tried to change |
Beta Was this translation helpful? Give feedback.
-
|
Full installation log. root@node-red:~# node-red-log |
Beta Was this translation helpful? Give feedback.
-
I haven't done an update in a while so I may be doing some wrong. I typed the command in the console for node-red. It says the command is not recognized. The scripts website says that's how you do it and I'm pretty I've run it in the past. It also says I could this:
bash -c "$(wget -qLO - https://github.com/community-scripts/ProxmoxVE/raw/main/ct/node-red.sh)"
I haven't tried it because I want to be sure it doesn't do a complete reinstall and wipe out my data.
I also tried update on Home Assistant. It ran, but died with an error. I know it used to work. I did set a post about a similar error in another script.
Beta Was this translation helpful? Give feedback.
All reactions