Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN Open Hardware License Version 2 - Strongly Reciprocal. (CERN-OHL-S)
You may redistribute and modify this documentation under the terms of the CERN OHL-S-v2 (https://ohwr.org/cern_ohl_s_v2.txt). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v2-S for applicable conditions
Under CERN OHL-S-v2, derivative work must be publicly released as defined in subsection 3.3
The PB 16v2 is a surface mount(SMD) version of the original PB16. The updated PB 16v2 has 16 local pixel ports, one remote receiver port(4 remote ports), a 16 port expansion, and 2 serial ports. A total of 36 pixel outputs. All the design files are open source and available on github.
- Powered by FPP Falcon Player
- Standalone/Master/Remote/Bridge Support
- 16 3-Wire Pixel Ports
- 1 RJ-45 Connector for a remote differential port.
- 700 pixel per output at 40 FPS or 1300 at 20 FPS
- 2 DMX Serial Outputs
- 1 RJ-45 Connectors with DMX/LOR Wiring Support
- Fused Powered DMX Output
- USB port for Ethernet,WIFI, or Audio
- OLED Display header
- Adafruit Real Time Clock Header Connector
- 2 pin GPIO Header for Push Button or Relay Support
- 5v - 24v Vin Support
- Expansion Header for additional 16 pixel outputs, Supports Falcon(v3) Expansion Boards
I (Scott) have a limited quantity of fully assembled PCB's available for purchase. PM me if interested.
- 2022-06-05
- Updated 5V regulator to "Universal" footprint to support different regulators.
- Switched to 603 Resistors and Capacitors
- Added Logo
- 2022-05-26
- Switched to surface mount 33ohm resistors on pixel outputs.
- 2020-08-11 (publicly released 2022-01-22)
- First SMD version.
- Based off PB16v1.
- Used 805 Resistors and Capacitors
- Changed one RJ45 port to new differential output.
- Added Power Controller to USB port.
- Added TVS Diodes to USB port.