Since 1.8.4, the notebook trackpad can not be used, has not been repaired, changed back to 1.8.3 can be used

[puzhengwu]

Pre-requirement
14.6 (23G80)

State the model
XiaoMi-Pro MX150, XiaoMi-Pro 8th GTX,...

State the version of the EFI
1.8.6

[kampav]

I have the same issue but if I switch to 1.8.3 I can't boot into macOS 15 (Sequoia)

[stevezhengshiqi]

How about enter the trackpad settings panel and restart a few times? I met this issue before, but it goes away easily and I can never reproduce it.

[puzhengwu]

How about enter the trackpad settings panel and restart a few times? I met this issue before, but it goes away easily and I can never reproduce it.

macos14.6 version of the system does not have too many trackpad Settings, search out all points, there is no use, before can not use, press the F9 key can open and close the trackpad, now can not use

[stevezhengshiqi]

@puzhengwu See if your System Settings-Trackpad show anything.

If not works, I suggest:

1. Use official VoodooI2C 2.9.1 release https://github.com/VoodooI2C/VoodooI2C/releases
   Replace both VoodooI2C and VoodooI2CHID from this source.

2. Use VoodooI2C 2.8 (Last known working release) with the latest VoodooInput https://github.com/acidanthera/VoodooInput/releases to support Sequoia.
   VoodooI2C-2.8_withNewVoodooInput.zip

Let me know what works and what not, thanks.

[puzhengwu]

@puzhengwu See if your System Settings-Trackpad show anything.

If not works, I suggest:

1. Use official VoodooI2C 2.9.1 release https://github.com/VoodooI2C/VoodooI2C/releases
   Replace both VoodooI2C and VoodooI2CHID from this source.
2. Use VoodooI2C 2.8 (Last known working release) with the latest VoodooInput https://github.com/acidanthera/VoodooInput/releases to support Sequoia.
   VoodooI2C-2.8_withNewVoodooInput.zip

Let me know what works and what not, thanks.

Hello, I just tried, the first scheme does not work, and then add the second voodooinput, also does not work, and then reduce voodool2c to 2.8, it is OK

[stevezhengshiqi]

@puzhengwu Thank you for testing. Could you test the EFI in https://github.com/daliansky/XiaoMi-Pro-Hackintosh/actions/runs/12311218602
It builds VoodooI2C v2.8 with the latest VoodooInput, so it should also support Sequoia.

[puzhengwu]

@puzhengwu Thank you for testing. Could you test the EFI in https://github.com/daliansky/XiaoMi-Pro-Hackintosh/actions/runs/12311218602 It builds VoodooI2C v2.8 with the latest VoodooInput, so it should also support Sequoia.

beta version is available

[stevezhengshiqi]

@puzhengwu Thanks again for testing. When you say available, do you mean the trackpad works in the beta EFI?
If everything works fine, I will publish the new version EFI.

[puzhengwu]

@puzhengwu再次感谢您的测试。您说可用，是指触控板在测试版 EFI 中可用吗？ 如果一切正常，我会发布新版本的 EFI。

Yes, thank you.