Skip to content

Latest commit

 

History

History
107 lines (80 loc) · 2.79 KB

vscode-arduino.md

File metadata and controls

107 lines (80 loc) · 2.79 KB
Raw

vscode-arduino

setup

note: change paths accordingly your local installation

  • install vscode
  • open a sketch (.ino file ) and install proposed extension

.vscode/settings.json

{
    "arduino.path": "/home/devel0/softcollect/public/arduino/arduino-1.8.10",
    "C_Cpp.intelliSenseEngine": "Tag Parser"
}

.vscode/arduino.json

{
    "sketch": "arduino-acs712.ino",
    "port": "/dev/ttyUSB0",
    "board": "arduino:avr:nano",
    "configuration": "cpu=atmega328old"
}

.vscode/c_cpp_properties.json

{
    "configurations": [{        
        "browse": {
            "path": [
                "/home/devel0/Arduino/libraries",
                "/home/devel0/softcollect/public/arduino/arduino-1.8.10/hardware/tools/avr/avr/include/avr",
                "/home/devel0/softcollect/public/arduino/arduino-1.8.10/hardware/arduino/avr/cores/arduino"
            ]
        },
        // as default
    }],    
    "version": 4
}
  • ctrl+shift+p change board type ( this will fill hardware atmega path in cpp includePath )
  • in the bottom toolbar choose programmer ( eg. AVRISP mkII )
  • analyze missing includes from the PROBLEMS window and resolve through light bulb on your #include <....> that will add some includePath from guess browse paths given in c_cpp_properties.json

troubleshoot

  • avrdude: stk500_getsync() attempt 1 of 10: not in sync : try to select processor ATmega328P (Old Bootloader)
  • avrdude run with stk500v2 instead of chosen programmer : ctrl+p upload using programmer
  • cannot open "WProgram.h" ( just add #define ARDUINO 10807 to top of your code )
  • cannot open serial ( may you have read-write permission as dialout group but still receive error you can set 666 only for usb serial arduino adapter ) :
    • /etc/udev/rules.d/99-arduino-usb.rules
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE="0666"
  • check your idVendor:idProduct through lsusb

usage

  • verify sketch ( ctrl+alt+r )
  • upload sketch ( ctrl+shift+p arduino upload using programmer )
  • open serial monitor ( ctrl+shift+p open serial monitor ) will visible in output / serial monitor

verbose loglevel

  • set in .vscode/settings.json
{
 "arduino.logLevel": "verbose"
}

increase build speed

  • set build option in .vscode/arduino.json
{
    "output": "../build"
}
  • when synchronize between nodes exclude build and .vscode folders to avoid build options changed detect

references