Skip to content

Latest commit

 

History

History
43 lines (32 loc) · 1.07 KB

README.md

File metadata and controls

43 lines (32 loc) · 1.07 KB
Raw

Saab CIM Tool

Saab CIM Tool

DIY Hardware

  • Arduino UNO
  • breadboard
  • SOP8 clamp + flat cable
  • breadboard jumper wires

Schematics

                      _____
 Chip Select (cs)  --|1   8|--  (pwr) Vcc
Serial Clock (sk)  --|2   7|--
     Data In (di)  --|3   6|--  (org) Organization Select
    Data Out (do)  --|4   5|--  (gnd) Vss/Ground
                      ¯¯¯¯¯
 Arduino Connection:
   Vcc (pwr)         - Pin 9
   Vss (gnd)         - GND
   Chip Select (cs)  - Pin 10
   Serial Clock (sk) - Pin 7
   Data In (di)      - Pin 11
   Data Out (do)     - Pin 12
   Org Select (org)  - Pin 8

The red cable on the SOP8 clamp indicates pin 1 and should be orinted to the corner marked with a small dot on the EEPROM

   8   7   6   5
 _ | _ | _ | _ | _
|                 |
|                 |
| O               |
 ¯ | ¯ | ¯ | ¯ | ¯
   1   2   3   4

Update firmware

./avr/avrdude.exe -c arduino -P <port> -b 115200 -p atmega328p -D -U flash:w:firmware/firmware.hex:i