By default, the device will be owned by UID and GID 0 and is only accessible by root.
If you need to change this, you may do this by adding udev rules to your machine configuration like this,
which would change the GID to 44 and give that group read/write permissions.
machine:
udev:
rules:
- SUBSYSTEM=="apex", MODE="0660", GROUP="44"You can verify the modules are enabled by reading the /proc/modules where it should show the module is live.
For example:
❯ talosctl -n 192.168.32.5 read /proc/modules
apex 20480 - - Live 0xffffffffc01c9000 (O)
gasket 94208 - - Live 0xffffffffc01aa000 (O)In addition, if you actually have Coral module installed, you should be able to verify it's presence at /dev/apex_0.
For example:
❯ talosctl -n 192.168.32.5 ls -l /dev/apex_0
NODE MODE UID GID SIZE(B) LASTMOD NAME
192.168.32.5 Dcrw-rw---- 0 44 0 Sep 10 18:15:52 apex_0