enoceanmqtt.conf.sample

## the general section defines parameter for the mqtt broker and the enocean interface
[CONFIG]
enocean_port    = /dev/enocean
log_packets     = 1

mqtt_host       = localhost
mqtt_port       = 1883
mqtt_client_id  = enocean   # ensure that this is unique if you use multiple clients

## setting mqtt_keepalive = 0 sets the timeout to infinitive but does not work reliably
## due to an upstream issue https://github.com/eclipse/paho.mqtt.python/issues/473
mqtt_keepalive  = 60

## the prefix is used for the mqtt value names; this is extended by the sensor name
mqtt_prefix     = enocean/

## publish received packets as single MQTT message with a JSON payload
# mqtt_publish_json = true

## optionally also set mqtt_user and mqtt_pwd (don't use quotes).
# mqtt_user       = mqtt
# mqtt_pwd        = password

## enable SSL on MQTT connection
## Ensure that mqtt_host matches one of the hostnames contained in the broker's
## certificate, otherwise the client will refuse to connect.
##
## mqtt_ssl_ca_certs: CA certificates to be treated as trusted. Required if
##     the MQTT broker is configured with a self-signed certificate.
## mqtt_ssl_certfile, mqtt_ssl_keyfile: Client certificate and private key.
##     Only required if the broker requires clients to present a certificate.
## mqtt_ssl_insecure: Disable verification of the broker's certificate.
##     WARNING: do NOT use on production systems as this is insecure!
##
# mqtt_ssl          = true
# mqtt_ssl_ca_certs = /path/CA_files_merged.pem
# mqtt_ssl_certfile = /path/client_cert.pem
# mqtt_ssl_keyfile  = /path/client_key.pem
# mqtt_ssl_insecure = true

## Enable MQTT debugging. Requires --debug on the command line.
# mqtt_debug      = true

## all other sections define the sensors to monitor

[switch]
address         = 0xfefee192
rorg            = 0xf6   # BS1
func            = 0x02
type            = 0x02
log_learn       = 1
publish_rssi    = 1

[temperature]
address         = 0x01823FFA
rorg            = 0xA5
func            = 0x02
type            = 0x05
persistent      = 1

[shutter]
# this sensor is used for sending data
# address is the destination address then
address         = 0x051C1FB7
rorg            = 0xD2
func            = 0x05
type            = 0x00

[radiator]
address         = 0xDEADBEEF
rorg            = 0xD2   # VLD
func            = 0x01
type            = 0x0C
log_learn       = 1
command         = CMD
# use a specific sender address when sending packets to this device
sender          = 0xFFDC1711

[hvac_actuator]
address = 0xFFDC9500
rorg            = 0xA5   # BS4
func            = 0x20
type            = 0x01
direction       = 1
answer          = 1
# when sending, this is the data default that can be customized via MQTT
default_data    = 0x32790008

[non_interesting]
address         = 0xFFD05085
# received messages from this sensor will not appear as warnings in the log file
ignore          = 1