Repocket and other 5 number ports

[Raffy142]

Hi, i have problem with proxy 5 ports, when i set i get this error
Can someone help me?

time="2024-10-16T23:26:35Z" level=info msg="[DIALER] set fwmark: 0x22b"
time="2024-10-16T23:26:35Z" level=info msg="[STACK] tun://tun0 <-> http://216.146.20.92:25971"
time="2024-10-16T23:26:37Z" level=info msg="[TCP] 198.18.0.1:46118 <-> 104.21.87.17:443"
time="2024-10-16T23:26:38Z" level=warning msg="[TCP] dial 208.95.112.1:80: HTTP connect status: 403 Forbidden"
time="2024-10-16T23:26:38Z" level=info msg="[TCP] 198.18.0.1:41806 <-> 172.67.139.50:443"
time="2024-10-16T23:26:39Z" level=info msg="[TCP] 198.18.0.1:46130 <-> 104.21.87.17:443"
time="2024-10-16T23:26:39Z" level=warning msg="[TCP] dial 207.246.122.60:7070: HTTP connect status: 403 Forbidden"
time="2024-10-16T23:26:40Z" level=warning msg="[TCP] dial 207.246.122.60:7070: HTTP connect status: 403 Forbidden"
time="2024-10-16T23:26:41Z" level=warning msg="[TCP] dial 207.246.122.60:7070: HTTP connect status: 403 Forbidden"

[engageub]

Hello,
Could you please check if these IP's are accessible via your proxy.
You can use curl command as mentioned below. Replace YOUR_PROXY with your http proxy.

curl -x YOUR_PROXY http://208.95.112.1

Alternatively, you can use browser to access the IP mentioned.

Thank you

[Raffy142]

what if I use a protocol other than Socks and http? i have IP Authorization too

[engageub]

The logs (tun2socks) show timeouts, so those proxies might not be working. Your tun2proxy logs have DNS issues. So there is some problem with your configuration or the latest version of tun2proxy.
Yes, you can use https proxies also but the issue is related to 5 port numbers on HTTP proxies.

Thank you

[engageub]

Hello,
I just wanted to follow up on this. Were you able to get proxies with 5 port numbers from other providers or got it working using the free proxies.

Thank you

[Raffy142]

Hi, no, i think the problem is provider and the isp is s***, but with honeygain, pawnapp work without any problem, probably don’t use too much 80 port

[engageub]

Thank you for the response. The port 80 is being used to get the IP address of your proxy.
The service providers are using port 80 to send the data when using curl command. So obviously the application will use the same.
It is still not clear what the underlying reason is.

Thank you