Concept: Pipelines and Command Lists

concepts/pipelines/.meta/config.json

@@ -0,0 +1,8 @@
+{
+  "authors": [
+    "glennj"
+  ],
+  "contributors": [
+  ],
+  "blurb": "Compose more complex bash commands with pipelines and command lists"
+}

concepts/pipelines/about.md

@@ -0,0 +1 @@
+# TODO

concepts/pipelines/introduction.md

@@ -0,0 +1,180 @@
+# Pipelines and Command Lists
+
+We have seen how to write simple commands, where a command is followed by arguments.
+Now we will see how to make more complex commands by composing simple commands.
+
+## Pipelines
+
+This is one of the "killer features" of shell programming.
+Pipelines allow you create sophisticated transformations on a stream of text.
+
+To produce a sorted list of users:
+
+```bash
+cat /etc/passwd | cut -d : -f 1 | sort
+```
+
+The pipe symbol (`|`) connects the output of one command to the input of another.
+`cut` reads the output of `cat`, and `sort` reads the output of `cut`.
+
+~~~~exercism/advanced
+* By default, each command in a pipeline runs in a separate subshell.
+  (A subshell is a child process that is a copy of the currently running shell.)
+
+* All the commands in a subshell execute in parallel.
+
+* There is a performance cost to running pipelines.
+  If you find yourself with long pipelines of similar commands, consider combining them in a single command.
+  For example, pipelines using multiple instances of `grep`, `cut`, `sed`, `awk`, and `tr` can generally be combined into a single `awk` command for efficiency.
+
+* The exit status of a pipeline is the exit status of the last command in the pipeline.
+  However, there is a shell setting that can control this.
+  The "pipefail" setting (enabled with `set -o pipefail`) will use the _**last** non-zero exit status_ of the commands in a pipeline as the pipeline's exit status, unless all commands succeeded.
+~~~~
+
+## Command Lists
+
+A command list is a sequence of pipelines separated by `;` (or newline), `&&` or `||`.
+
+* `A; B` is a command list where `B` executes after `A` has completed.
+* `A && B`, where `B` executes only if `A` succeeds (exits with status zero).
+* `A || B`, where `B` executes only if `A` fails (exits with status non-zero).
+
+The exit status of a command list is the exit status of the last command that was executed.
+
+The `&&` and `||` operators can be chained so that the next command conditionally executes based on the status of the preceding commands.
+For example
+
+```bash
+A && B && C && D || E
+```
+
+* B executes if A succeeds,
+* C executes if A and B succeed,
+* D executes if A and B and C succeed,
+* E executes if **any** of A, B, C or D fails.
+
+~~~~exercism/caution
+Use these logical operators sparingly.
+They can quickly lead to unreadable code, or logic that is hard to comprehend.
+
+For example, do you think these are the same?
+
+```bash
+if A; then B; else C; fi
+```
+
+```bash
+A && B || C
+```
+
+They differ in when C is executed.
+
+* In the first snippet (the if statement), C will only execute if A fails.
+* In the second snippet, C executes if A fails _or if A succeeds but B fails_!
+~~~~
+
+### Uses of Command Lists
+
+Here are a couple of examples where command lists can simplify bash code.
+
+#### Reading blocks of lines from a file
+
+Suppose you have a data file that represents points of a triangle as the length of the three sides but each on a separate line.
+
+```bash
+$ cat triangle.dat
+3
+4
+5
+9
+12
+14
+```
+
+You can use a while loop where the condition is three separate read commands:
+
+```bash
+while read a && read b && read c; do
+    if is_pythagorean "$a" "$b" "$c"; then
+        echo "$a:$b:$c is pythagorean"
+    else
+        echo "$a:$b:$c is not pythagorean"
+    fi
+done < triangle.dat
+```
+
+Assuming `is_pythagorean` is a command that determines if the three sides satisfy the Pythagoran equation, the output would be
+
+```none
+3:4:5 is pythagorean
+9:12:14 is not pythagorean
+```
+
+#### Assertions
+
+Many programming languages have a form of assertion where an exception is thrown if some condition fails
+
+```
+assert(x == 5, "x must be 5");
+```
+
+We can use an OR operator in bash to simulate that function:
+
+```bash
+die () {
+    echo "$*" >&2
+    exit 1
+}
+
+[[ $x -eq 5 ]] || die "x must be equal to 5"
+[[ $y -gt 5 ]] || die "y must be greater than 5"
+```
+
+## Style Considerations
+
+Long command lists become hard to read quite quickly.
+Liberal use of newlines can help a lot.
+
+Consider this example where a word is added to an array if two conditions are met.
+
+```bash
+[[ "$word" != "$topic" ]] && [[ "$key" == "$(sorted "$topic")" ]] && anagrams+=("$candidate")
+```
+
+Bash allows you to add a newline after a pipe or a logical operator.
+
+```bash
+[[ "$word" != "$topic" ]] &&
+[[ "$key" == "$(sorted "$topic")" ]] &&
+anagrams+=("$candidate")
+```
+
+However, the operator can be easy to miss at the end of the line.
+Using a _line continuation_ means you can put the operator first, which makes it more obvious that the list is being continued:
+
+```bash
+[[ "$word" != "$topic" ]] \
+&& [[ "$key" == "$(sorted "$topic")" ]] \
+&& anagrams+=("$candidate")
+```
+
+~~~~exercism/note
+A _line continuation_ is the two character sequence "backslash" and "newline" (`\` + `\n`).
+When bash sees that sequence, it is simply removed from the code, thereby _continuing_ the current line with the next line.
+Take care to not allow any spaces between the backslash and the newline.
+~~~~
+
+Here's another example
+
+```bash
+printf "%s\n" "${numbers[@]}" | bc --mathlib | sort --general-numeric-sort
+```
+
+or 
+
+```bash
+printf "%s\n" "${numbers[@]}" \
+| bc --mathlib \
+| sort --general-numeric-sort
+```

concepts/pipelines/links.json

@@ -0,0 +1,10 @@
+[
+  {
+    "url": "https://www.gnu.org/software/bash/manual/bash.html#Pipelines",
+    "description": "Pipelines"
+  },
+  {
+    "url": "https://www.gnu.org/software/bash/manual/bash.html#Lists",
+    "description": "Lists of Commands"
+  }
+]

config.json

@@ -1243,6 +1243,11 @@
       "uuid": "ae9f3e82-bcdd-4c09-9788-bc543235fd52",
       "slug": "looping",
       "name": "Looping"
+    },
+    {
+      "uuid": "f64a17aa-cbdb-49de-b50c-f3bf14a4e03d",
+      "slug": "pipelines",
+      "name": "Pipelines and Command Lists"
     }
   ],
   "key_features": [