Click on PHONE DX Spots sets wrong mode

[foldynl]

From mailing list:

Interesting phenomena with the newest release when using with the Yaesu FTDX101MP.

Never experienced this before, however now when I click on a DX spot, and the rig switches to the band and frequency, often the sideband (USB / LSB) is not correct for the band. For example, if I click on a spot from 20 meters, it often switches the rig over to LSB. On 40 meters often to USB. If I clink that spot several times, Qlog finally switches to the correct sideband.

[foldynl]

According to the test, it is not clear whether it is a Hamlib or Qlog error. Based on a the QLog's trace file, it seems that Qlog sends the correct mode, but Hamlib reports other mode
qlog.trace.txt

Tested also with current Hamlib master branch

[foldynl]

currently there is no known solution. Commit 2d784a8 does not solve the problem, it only fixes what was seen from the trace file.

[jmeloranta]

and sometimes this leads to leaving the mode to CW. Then I have to manually switch to USB (or LSB).