IS31FL3733 C library

This library support Pulse Width Mode (PWM) and Auto Breath Mode (ABM) for IS31FL3733. To use device in PWM mode, include is31fl3733.h file to your project. To use device in ABM mode, include is31fl3733_abm.h file to your project.

Common steps

To work with library in any of this modes you need to declare an instance of IS31FL3733:

IS31FL3733 is31fl3733_0;

Multiple instances with different I2C addresses on same or different I2C buses can be declared.

Implement an i2c_write_reg and i2c_read_reg functions (example for STM32):

I2C_HandleTypeDef hi2c1;

uint8_t i2c_write_reg (uint8_t i2c_addr, uint8_t reg_addr, uint8_t *buffer, uint8_t count)
{
  return HAL_I2C_Mem_Write (&hi2c1, i2c_addr, reg_addr, I2C_MEMADD_SIZE_8BIT, buffer, count, 1);
}

uint8_t i2c_read_reg (uint8_t i2c_addr, uint8_t reg_addr, uint8_t *buffer, uint8_t count)
{
  return HAL_I2C_Mem_Read (&hi2c1, i2c_addr, reg_addr, I2C_MEMADD_SIZE_8BIT, buffer, count, 1);
}

Set instance parameters and pointer to i2c_write_reg and i2c_read_reg functions:

is31fl3733_0.address = IS31FL3733_I2C_ADDR(ADDR_GND, ADDR_GND);
is31fl3733_0.i2c_write_reg = &i2c_write_reg;
is31fl3733_0.i2c_read_reg = &i2c_read_reg;

Initialize device:

// Initialize device.
IS31FL3733_Init (&is31fl3733_0);
// Set Global Current Control.
IS31FL3733_SetGCC (&is31fl3733_0, 127);

PWM mode

Draw something in PWM mode, e.g. set LED brightness at position {1;2} to maximum level:

// Set PWM value for LED at {1;2}.
IS31FL3733_SetLEDPWM (&is31fl3733_0, 1, 2, 255);
// Turn on LED at position {1;2}.
IS31FL3733_SetLEDState (&is31fl3733_0, 1, 2, IS31FL3733_LED_STATE_ON);

You can control all LED's in column/row and full LED matrix:

// Set PWM values for all LEDs at 1-st column to 15/255 level.
IS31FL3733_SetLEDPWM (&is31fl3733_0, 1, IS31FL3733_SW, 15);
// Turn on selected LEDs.
IS31FL3733_SetLEDState (&is31fl3733_0, 1, IS31FL3733_SW, IS31FL3733_LED_STATE_ON);
// Set PWM values for all LEDs at 7-th row to 55/255 level.
IS31FL3733_SetLEDPWM (&is31fl3733_0, IS31FL3733_CS, 7, 55);
// Turn on selected LEDs.
IS31FL3733_SetLEDState (&is31fl3733_0, IS31FL3733_CS, 7, IS31FL3733_LED_STATE_ON);
// Set PWM values for all LEDs in matrix to 146/255 level.
IS31FL3733_SetLEDPWM (&is31fl3733_0, IS31FL3733_CS, IS31FL3733_SW, 146);
// Turn on selected LEDs.
IS31FL3733_SetLEDState (&is31fl3733_0, IS31FL3733_CS, IS31FL3733_SW, IS31FL3733_LED_STATE_ON);

Also you can update all LEDs state and brightness from an array of values, e.g. draw a heart figure:

// 16x12 heart figure.
static const uint8_t heart[] = {
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0xff,0xff,0xff,0xff,0x00,0x00,0xff,0xff,0xff,0xff,0x00,0x00,0x00,
  0x00,0x00,0x00,0xff,0x00,0x00,0xff,0xff,0xff,0xff,0x00,0x00,0xff,0x00,0x00,0x00,
  0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,
  0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
// Set LED brightness for all LEDs from an array.
IS31FL3733_SetPWM (&is31fl3733_0, (uint8_t*)heart);
// Turn on LED with non-zero brightness.
IS31FL3733_SetState (&is31fl3733_0, (uint8_t*)heart);

ABM mode

To draw automatically pulsed heart from PWM mode example declare an instance of IS31FL3733_ABM structure

IS31FL3733_ABM ABM1;

Initialize device to ABM mode, set ABM mode parameters and start ABM mode operation:

// Turn on LEDs for heart figure.
IS31FL3733_SetState (&is31fl3733_0, (uint8_t*)heart);
// Configure all matrix LEDs to work in ABM1 mode.
IS31FL3733_SetLEDMode (&is31fl3733_0, IS31FL3733_CS, IS31FL3733_SW, IS31FL3733_LED_MODE_ABM1);
// Set ABM mode structure parameters.
ABM1.T1 = IS31FL3733_ABM_T1_840MS;
ABM1.T2 = IS31FL3733_ABM_T2_840MS;
ABM1.T3 = IS31FL3733_ABM_T3_840MS;
ABM1.T4 = IS31FL3733_ABM_T4_840MS;
ABM1.Tbegin = IS31FL3733_ABM_LOOP_BEGIN_T4;
ABM1.Tend = IS31FL3733_ABM_LOOP_END_T3;
ABM1.Times = IS31FL3733_ABM_LOOP_FOREVER;
// Write ABM structure parameters to device registers.
IS31FL3733_ConfigABM (&is31fl3733_0, IS31FL3733_ABM_NUM_1, &ABM1);
// Start ABM mode operation.
IS31FL3733_StartABM (&is31fl3733_0);