Skip to content

Latest commit

 

History

History
180 lines (138 loc) · 12.4 KB

RELEASENOTES.md

File metadata and controls

180 lines (138 loc) · 12.4 KB
Raw
Logo

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
  2. Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.8 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version v3.1.0.240926.

Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.240926 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.8.

  • tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
  • tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
  • tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
  • tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
  • tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version v3.1.0.240926.

  • tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
  • tasmota32s2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash.
  • tasmota32s2cdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash.
  • tasmota32s3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash.
  • tasmota32c2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash.
  • tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash.
  • tasmota32c6.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash.
  • tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
  • tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
  • tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
  • tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
  • tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
  • tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
  • tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
  • tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v14.3.0.7

Added

  • Command WebColor20 to control color of Button when Off
  • Command SetOption161 1 to disable display of state text (#22515)
  • DALI support for short addresses (gear) and groups
  • DALI command DaliGear to set max found gear to speed up scan response
  • DALI command DaliGroup to add gear to groups
  • DALI command DaliTarget to set light control broadcast, group number or gear number
  • DALI command DaliGroupSliders 0..16 to show GUI group sliders with feedback disabling DaliLight
  • DALI inverted signal configuration using GPIO DALI RX_i/TX_i
  • Support for I2C over Serial #22444
  • Support KNX for scripts #22429
  • Support deep sleep (standby) for VL53L0X #22441
  • Support for Shelly DALI Dimmer Gen3
  • Support for HLK-LD2410S 24GHz smart wave motion sensor #22253
  • Support for US AQI and EPA AQI in PMS5003x sensors #22294
  • Support for MS5837 pressure and temperature sensor #22376
  • Support for TM1640 based IoTTimer by Stefan Oskamp #21376
  • HLK-LD2410 Engineering mode #21880
  • Mitsubishi Electric HVAC Operation time for MiElHVAC #22334
  • Mitsubishi Electric HVAC Outdoor Temperature for MiElHVAC #22345
  • Mitsubishi Electric HVAC Compressor Frequency for MiElHVAC #22347
  • Mitsubishi Electric HVAC Auto Clear Remote Temp for MiElHVAC #22370
  • SolaxX1 Meter mode #22330
  • ESP32 MI32 legacy add config operations #22458
  • BLE track devices with RPA #22300
  • Berry add I2C read16/write16 supporting Little Endian #22448
  • Berry drivers for PCA9535 (generic and in SenseCAP D1) #22451
  • HASPmota haspmota.get_pages() to get the sorted list of pages #22358

Breaking Changed

Changed

  • ESP32 Platform from 2024.09.30 to 2024.11.31, Framework (Arduino Core) from v3.1.0.240926 to v3.1.0.241117 and IDF to 5.3.1.241024 #22504
  • ESP32 LVGL library from v9.2.0 to v9.2.2 #22385
  • Redesign GUI adding feedback to buttons, shutters and lights
  • Use command WebButton1 to change GUI shutter 1 name
  • Unit (k)VAr(h) to (k)var(h) #22435
  • AHT1X/AHT2X/AHT3X ready for virtual I2C #22427
  • SGP4X ready for virtual I2C #22427
  • SCD40 reduce logging levels #22443
  • SCD40 ready for virtual I2C #22443
  • Refactored i2c_enabled as array #22387
  • DALI renamed commands DaliCommission to DaliScan and DaliWeb to DaliLight
  • DALI set Tasmota light control as default
  • Shutter optimized behavior to publish shutter data with sensor request #22353
  • ESP32 max number of supported switches/buttons/relays from 28 to 32
  • ESP32 max number of interlocks from 14 to 16
  • HASPmota support for page delete and object updates #22311

Fixed

  • FUNC_COMMAND linked list command buffer corruption by shutter driver
  • Prevent crashing when display.ini is missing end # #22471
  • Alexa Hue with multiple devices #22383
  • Mitsubishi Electric HVAC Standby Stage for MiElHVAC #22430
  • EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic #22328
  • Ethernet on -DFRAMEWORK_ARDUINO_ITEAD framework regression from v14.3.0 #22367
  • ESP32 Upgrade by file upload response based on file size #22500
  • ESP32 Arduino Core IPv6 zones used by Matter #22378
  • ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons #22446
  • ESP32-S3 UART output mode for Tx #22426
  • Matter provisioning with matter.js controller #22470

Removed